Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

P-51D de Big Beautiful Doll 1600mm EPO w / Retrae eléctricos, alerones, luces (FNP)

P-51D de Big Beautiful Doll 1600mm EPO w / Retrae eléctricos, alerones, luces...

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
5814 g
SKU:
P-51D-BD-PNP

Combine

essential items and
battery
acc
Descripción
del
Este es uno de Warbird de espuma grande! Ser Plug N Fly es un modelo de acumulación rápida llena de suficientes características y detalles de la escala para hacer de este un pájaro que se siente orgulloso de poseer.

Hecho de espuma EPO, este modelo es práctico a pesar de su tamaño, un ala extraíble uno pedazo hace para facilitar su transporte, incluso la cola puede ser un-atornillada si se desea. Se retrae la pre-empotrados servo de las eléctricas y son pre-etiquetados haciendo campo de montaje rápido y sencillo. Se utiliza el tipo de 4s paquetes que se están volviendo muy comunes ahora en grandes de foamie, lo más probable es, que ya tiene unos cuantos en su flightbox. El motor de pre-equipada tiene un montón de energía para aquellas acrobacias aéreas Warbird escala o simplemente straffing su campo de vuelo!

detalle escala es sencillamente magnífico, al igual que las etiquetas pre-aplicado, las características incluyen pre-instalado eléctrica se retrae / rueda de cola, no es la misma escala de 4 prop palas y spinner, luces de navegación, salida del radiador ajustable, tanques de combustible, los trozos de escape moldeados y armas de fuego . Las solapas de mantener la velocidad de aterrizaje justo abajo, este modelo no tiene tendencia parada de extremidad Warbird desagradables, simplemente flota en como un entrenador. Si alguna vez has imaginado poseer un Warbird pero nos desanime todas las historias que han escuchado acerca de ellos siendo "difícil" para volar, este es el modelo para usted!

Especificaciones:
Envergadura: 1600mm
Longitud: 1400mm
Peso del vuelo: 2800g
Motor: 45-58 sin escobillas
ESC: 80A w / BEC
Objeto: 16x6 de cuatro palas
Servo: 9g x 4, 17g x 2
Retrae: Eléctrico Tipo Servoless
6 canales (thottle, alerones, profundidad, dirección, retraiga, aletas)

incluye:
Todo Hardware
Libro de instrucciones
pegamento

Se requiere:
Su propio canal 6 TX / RX
Batería 3200mAh ~ 4000mAh Lipo 4S
* Tenga en cuenta, debido al tamaño de este modelo, que será enviado en caja doble para llegar en buena conition.
Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    P-51D-BD-PNP
  • Brand:
    N/A
  • Capacidad ( mAh )
    No
  • Peso ( g)
    5814.00
  • Longitud:
    1240.00
  • Ancho:
    270.00
  • Altura
    470.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I cannot believe the abysmal quality if Hibbyking parts and the fact people continue to buy this crap.
My son and I bought a P51 each, neither motors worked and finally when we got a working motor BOTH ESC's ceased working.
Additionally my sons 1600 Edge had exactly the same problem.
When you then have to replace the retracts and servos or risk an air failure, you are better off spending the $$$ on quality planes and equipment.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Because I'm waiting, waiting, waiting for Hobbyking to get their act together and send me a working motor I am nevertheless very busy.
The tail wheel pull cable is poorly thought thru so I've replaced it with push/pull rods.
Both flap servos have literally burst into flames just sitting idle so they are replaced, obviously.
Retracts seem to have a mind of their own and I'm really tempted to just replace them even before it flies.
On another note, balance was so far out I needed about 6oz of lead at the firewall. This I find amazing that a model could be so off balance.
Summary, a great plane once you spend another few hundred bucks making it flyable.
Another piece of rubbish.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
After two other planes from HobbyKing, both with missing or defective parts I was apprehensive, and HK did not disappoint.
My motor was used, second hand. The prop mount screws were wrong gauge to the holes in the motor and the holes all had stripped threads.
The motor mount is off centre so I need to mount an adaptor to align it centrally.
There was no cover tape for the servos, and as another person noted, one of the flap servos was red and burned out immediately, (I don't mean after a few minutes, IMMEDIATELY) so I've replaced that one.
Not having run the motor yet, I can't comment on the prop mount or balance, let alone flight until,HobbyKing take their usual 2 weeks to even get a warranty claim moving. I'm not looking at getting a replacement from then for at least a month so it's off to buy a replacement in the meantime.
Yes I'm pissed off.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Well after a fare bit of fiddling I got to do a maiden flight with BBD.
My local club, has a field, sound cool but it's a field not much bigger than a football pitch with large hedges down both side so park flyer really,we keep well mown so short field grass , anyway weather was nice and the wind light.
Taking off (no flaps ) at less than half throttle, and we were up and away ,nice and smooth and scale like,just a few licks of trim and she's flying "hands free" no problem ,she flies really nice, very scale,not over powered on 4s 4000mah but plenty there for all the normal, loop rolls,stall turns,hammer heads etc, all with graceful ease.
She does needs a fare hand on the rudder to keep her tracking nice,or the tail drops to the inside do the turn,
This bird does have great presence and really looks the part in the sunset evening sky and sounds sweet with the 4 blade prop .There's no nasties, no tippy stalls, she just float around really sweet.
landing is trainer stuff....line her up keep the prop spinning and just float in (no flaps) slow her down and touch down nice and gentle ... ah!!!! ..right hand LG gave way as she stopped. So Playtime over.
So,yes the LG is pretty poor ,after a stripping down the a-fending retract , its would seems that one of the two very tiny micro switches ( 2mm x 3mm) that regulate the travel had popped off it mounting.The problem is , it
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
purchased this plane recentlt.very happy with the fit and finish,however my motor is defective ,when running at slow speeds the motor magnets are rubbing because the can is out of round.....with keeping the stock 4 blade prop on and keeping the same esc,WHAT WOULD A GOOD QUALITY MOTOR REPLACEMENT BE RUNNING A 4S 4000MAH BATTERY?OF COURSE I WOULD WANT TO FIT IT IN WITH NO ALTERING PLANE OR MOUNT?HAS ANYONE DONE THIS?APPARENTLY THIS IS A 400 KV MOTOR,TO GET A LITTLE BETTER PERFORMANCE SHOULD I BE GETTING A 450 KV?ANYONE .......????
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this is one sweet mustang,for the money, i havent had any problems with the retracts,however,i re-did the plywood mount with a thicker wider piece of ply,re-screwed back in,and gorrilla glued...noe good,package came perfectly packed,your an ace hobby king!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I love this plane but ther are some parts that you will need to fix, like the horns for the flaps ant Togo and the vertical stabiliser need better instructions too, but still a good buy,
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Beautifull EPO plane !

Looks like any other balsa plane, good quality EPO.

The only point of critisism is the weak fastening of the landing .
It is attached to the EPO. There is on youtube a good tutorial on how to strengten the gear, do this and you have lot's of fun with this warbird !


http://www.youtube.com/watch?v=xS7Im3RESEw&feature=youtube_gdata_player
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Its a nice plane but there are issues with the retracts. The retracts only successfully cycled once the one burnt out. The only retract still working is the tail wheel now. I havent flown the plane yet as it didnt come with any bolts to hold the wing down. Hobbyking was no help so I made my own hold down bolts from M4 threadded rod.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Have received mine a while ago and i`m very pleased with it. Just 2 things that need a little attention. for 1 the landing gear is weak an flumsy as you can read in all the other reviews. second, the plating on witch the engine is mounted is thin and weak. you might also test the servo`s as they are not the best quality. I Replaced all these weak spots and now its a real stunning plane. flies easy and predictable jet quite fast. easy to take off and land. And even if you replace all servo`s and gear still it`s a bargain.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
battery
acc

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.