Mostrar : TODAS LAS CATEGORIAS 0 Aeronave 1922 Aviones 1086 Todos los Aviones 145

P40 Funfighter - EPO 700 mm (PNF)

P40 Funfighter - EPO 700 mm (PNF)

36 Revisión

Precio:

Now save ahorra 0,00 € 0,00 €

94,55 €

Ya comprado Discontinued Product

Please continue searching for a similar product.

SKU:

P40-PNP

¿Envío gratis? ¡Haga clic aquí! aprender más!

Comparte este producto y Gana 500 puntos (4,73 €) [ ? ]

Descripción del producto

Por lo tanto, usted quiere un parkflyer rápido!?
Olvidar detalles escala aburridas y reina estantería buena apariencia esta P40 se construye para la velocidad y la diversión todo lo alto! Lucha de perro con amigos en 3S o utilizar un paquete 4S para el corazón palpitante de alta velocidad pasa, de cualquier manera a los combatientes de la diversión han cubierto. La combinación del peso ligero EPO fuselaje, un motor sin escobillas de alta potencia y un simple lugar de alerones y la configuración del ascensor estos modelos entre los volantes parque más estimulantes que llega al mercado este año. Te ser dejado fuera de la diversión!

Este modelo viene enchufe y volar y sólo requiere unos pocos minutos de tiempo de montaje y vuela como sus rieles en gracias a la técnica de moldeo de una pieza utilizada en la construcción. Todo lo que se requieren para tener la P40 en el aire es una batería de 3 ~ 4S 850mAh 20C Lipo y su propio transmisor y el receptor (Tx / Rx)

Especificaciones:
Envergadura: 700mm
Longitud: 540 mm
Peso del vuelo: 330g
Objeto: 5.5x4.5 (3x incluida)
Motor: Motor sin escobillas 2825-1950kv outrunner
ESC: 20A [Mejorado verdadera 4S]
Servo: 3 x 8gram

Necesario:
Batería 850mAh 3 ~ 20C Lipo 4S
Transmisor y receptor de Canal 4

Nota: Para una actualización verdaderamente balístico prueba el 45 ~ 90C Lipo Pack de Turnigy nano-tech 850mah 4S. Ver los artículos relacionados a continuación.

Especificaciones del producto

Videos

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Discutir 0

Temas

Ordenar por

Temas más recientes

Publica un tema nuevo

Revisión

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

| Comprador verificado

Overall
Quality
Value

Certified Buyer Rated

May 17, 2014

Wow fast and fast lol seriously great little flyer bit twitchy but its always going to be with its weight and size. I used a turnigy 800mah 35c and has plenty of speed

ww2 buff | Comprador verificado

Overall
Quality
Value

Customer Rated

Jan 08, 2014

ok plane,just dont listen a word to instuctions on weight and balance on this thing.put battery right forward.had more trouble with balance than all my other planes combined(about 7 planes)flown 20 times and had 3 flights over 5 seconds.weght too far bak running turnigy 3s 850ma nanos in it.flys like an angry ferritt but at least it takes a huge amount of punishment.be sure to buy a BIIIG bottle of glue to fix this thing ae.

Zamjustice | Comprador verificado

Overall
Quality
Value

Certified Buyer Rated

Sep 30, 2013

Awesome speed off zippy compact 1000mAh 35C 3S. Ensure you balance the prop and spinner.

nayls | Comprador verificado

Overall
Quality
Value

Customer Rated

Sep 08, 2013

Had first flight today in really windy conditions . Went well . Tried 1300 nano 3 cell battery first . Not a lot of spare room in there . Then tried 850 4 cell and went much much better . Hardly any trimming needed . Factory ESC from my T28 funfighter went in this as all the bullet connectors and xt 60 plug were already attached .Peeled the shrinkwrap of the heatsink and after mixed flying ESC was fairly warm but not as bad as I thought it would be. May make an air scoop ( from half of a KFC spoon, just cut the spoon bit in half , drill hole throgh the fuselage, then glue scoop on over hole ) ) to divert air onto ESC .

Rudi | Comprador verificado

Overall
Quality
Value

Customer Rated

Aug 27, 2013

A real good plane. Fun to fly with.
fast on 3 cell's. DONT'T FLY 4 CELL'S ON THE STOCK REGULATOR. IT WILL BREAKE !!!
flies verry fast.
a bit tricky to hand launch.
Best practice is to let a partner hand launch it.
a hard push, a bit up is best.
good advice : put dual rate on 40pcnt on for launching. When the plane hase not enough speed it listens verry hard to the airlerons.
Dont fly to slow when landing.
NOT a beginners plane.

razorrc | Comprador verificado

Overall
Quality
Value

Certified Buyer Rated

Jul 27, 2013

Very easy to build, good instructions and with correct cg 32mm behind leaning edge. This plane does not come with XT 60 connecters it comes with bullets. Hand launch is tricky because the plane always wants to roll left (torque from motor). In the air it tracks straight when trimmed out and i fly with a 3s 1300 perfect cg and power and is clocking at least 60 mph. half throttle. Warning: THIS PLANE TIPSTALLS VERY EASILY IN LOW SPEEDS. The plane at less then 1/4 throttle will tipstall coming in for a landing. This is how you should land: make sure you are far away to get slowly low to the ground about 5ft. or1meter off the ground at 1/3 throttle soon cut throttle at about 2 ft. off the ground and it glides in hot but if you have grass it should not be a problem. I have crashed 2 times because of tipstalls but this means I can test how easy the repair is. Its very easy if your motor mount get loose it has epo to guide how much torque you need no counteract thrust. I do recommend to take pics of the motor and torque just in case. Over all you are paying for a very good motor/esc (don't run this on 4s just saying) that are worth at least 80 dollars and if you crash hard you make a scratch build racer:D. I do recommend this product to all experienced pilots but not to new comers.

Martin | Comprador verificado

Overall
Quality
Value

Customer Rated

Jul 12, 2013

Top Modell fliegt wie Sau der Vogel... mit 4S und 5,5X5,5 nicht zu bremsen ;-) macht einfach nur spa!!!

landguru1 | Comprador verificado

Overall
Quality
Value

Customer Rated

Jun 24, 2013

Out of the box, both aileron servos were stripped. One completely stripped, the other had a skip in it. I replaced both with HTX900 servos. After the 8th flight, the elevator servo developed a random twitch, causing the plane to go into a loop. So, I changed that servo out to an HTX900, too. I wish HK would sell the Fun Fighters as kits, the components that come with the plane as a PNP are sub par. I also changed out the ESC to a 30 amp. Finally, the plane is dialed in and is a blast to fly. Worth the extra work to get it right!

Stimpy73 | Comprador verificado

Overall
Quality
Value

Customer Rated

Oct 30, 2012

Received mine yesterday,well packaged, and no damage,assembly was easy,and I'm looking fwd to the scare!
Cheers aus hk

Johnny | Comprador verificado

Overall
Quality
Value

Customer Rated

Oct 26, 2012

Love this little airplane! It's fast, fun and a handfull to handle: ) I didn't got the recomended cg to work. The manual says 32mm from the leading edge, but my p40 works best at ( strange enough) 15mm from the leading edge! I use the nano-tech 4s 850mha. But anyway, I really like this one!! Just buy it and have the time of your life:)