Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Turnigy P606 LiPoly / Vida AC / DC cargador (enchufe de EE.UU.)

Generating Links

Turnigy P606 LiPoly / Vida AC / DC cargador (enchufe de EE.UU.)

Precio:

Now save ahorra 0,00 € 0,00 €

38,12 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9070000056-3
¿Envío gratis? ¡Haga clic aquí! aprender más!

Turnigy P606 LiPoly / Vida AC / DC cargador (enchufe de EE.UU.)

Turnigy han producido una vez más un cargador compacto con excelentes características. Este cargador de equilibrio tiene un voltaje de entrada de CA o CC que permite cargar en el país o fuera donde su uso de sus modelos. El cargador tiene potencia más que suficiente, 50W, para proporcionar una corriente de carga máxima de 6A.

La unidad está diseñada para cargar las baterías de 1 sa una 6S. Puede manejar diferentes combinaciones al mismo tiempo, 6x1S o 3x2S o 2x3S o 1x2s más 1 x 4S o 1x1S más 1x5S o 1x6. No hay necesidad de dejar el cargador al conectar o desconectar las baterías como la batería comenzará a cargarse (después de 20seg) cuando está enchufado.

Este cargador es sólo para uso con baterías Lipoly o la vida.

Así que si usted está buscando un cargador sencillo para el hogar o el taller del Turnigy P606 sería perfecto.

caracteristicas:
• Entrada de alimentación de CA o CC
• Existe la posibilidad de conectar o desconectar las baterías durante la carga
• Las baterías cargadas a través de balance de plomo
• Las pilas se cargue tan pronto como estén enchufados
• La pantalla puede mostrar la capacidad de cada batería y cada célula
• El adaptador es compatible con la conexión al mismo tiempo para 6 1S * o 3 * 2 * 2S o 3S o 1 * 6S batería
• Sólo cargue pilas Lipoly o la vida

Especificaciones:
Entrada de CA: 100-240V
DC de entrada: 10-18V
Apoyo Tipo de batería: LIPO, VIDA
Corriente de carga: 0.1-6.0A
La carga de energía: 50W
Conector de salida: JST-XH2.5 (7P)
Tamaño de la caja: 145 x 132 x 47mm
Peso: 335 g

incluye:
TURNIGY P606 Cargador
Cable de alimentación (enchufe de EE.UU.)
cable de 12V con tapones de cocodrilo
tabla de equilibrio y el cable
Manual

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

????? | Comprador verificado

  • Overall
  • Quality
  • Value

good product, poor quality

Oct 24, 2019

The charger failed after < 3hours of use.

Nfcole | Comprador verificado

  • Overall
  • Quality
  • Value

Charges automatically. Simple

Aug 13, 2019

Works great

Bryan | Comprador verificado

  • Overall
  • Quality
  • Value

no storage function, instructions absurdly bad

May 17, 2019

The instructions are absolutely terrible. The translator who wrote them needs to be fired. that being said, it works well with my batteries. I wish it had a function to establish a storage charge in my LiPO batteries, but it doesn't. That being said, it does the job, and does it well. I'll buy a fancier charger if it's that big of a deal in the future. Until then, I like it.

Scott | Comprador verificado

  • Overall
  • Quality
  • Value

Very slow

Mar 09, 2019

It works ... it charges my lipos but it's very slow. Two 3S 1350's at the same time will take 90 minutes.

JOHN | Comprador verificado

  • Overall
  • Quality
  • Value

Weak

May 30, 2018

As battery is charged, this charger will not maintain the charge rate. Set for 5 amps, started out at 3.2 amps and decreased steadily to about 0.1 amp near end. As a result it took 2-2 1/2 hours to charge a 4S 5000Mah pack.
Even setting to max amps (6) produced little to no improvement.
On the plus side the individual cells were VERY closely matched.

Jan | Comprador verificado

  • Overall
  • Quality
  • Value

The best balancing I have ever seen!

Oct 23, 2017

Slow ...yes! Expect to get 1.5ah of charge into your battery at a 2.0-2.2 amp rate after an hour but in the end you have to go slow anyway to get all the cells balanced. Other "balance" chargers I have seem to go over the 4.200 volt limit on a couple of cells in a 6s pack or are high on their voltage measurements. Not this one, and talk about easy to use ... Plug in the balance lead and let it charge ... Quiet fan when it is working hard on AC power and as the power drops off the fan shuts down for total silence. I bought two for a friend because it is easy to use and liked it so much I got one for myself!

steve9mm | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 12, 2016

This is an excellent charger that allows you to charge a wide variety of batteries. I connect two 3s or up to 6 1s batteries. You can monitor the charge state of each cell to see how much it was discharged to make you aren't over-discharging your batteries and shortening their life. Setting the charging rate is easy. It even beeps when all the cells have been fully charged.

LuisMV63 | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 09, 2016

Very slow, it is so slow that you will get roots wile waiting for your LiPos.

My LiPo of 3s, 2200mah 40c, was charged in 3:17 hours at rate of 2.1 Amps.

Normally this same LiPo in my Reaktor take less 1 hour to charge at 2.1a in balance mode. This Charger take more tan 3 times almost 4 times to charge the same LiPo at the same rate of charging.

Review this Link with a video showing the results: https://drive.google.com/file/d/0B0L_MZL6bW6fVExoal8wR3NYZG8/view?usp=sharing

Hobby King it is not your standard.
Regards.

steve9mm | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 20, 2016

This is an excellent charger for LiPo batteries. It charges multiple batteries at one time, monitors the charge state of each cell and beeps when charging is completed. You can monitor the charging rate and voltage of each cell while it's charging too.

Archivos de clientes
Manual Turnigy P606 Charger Download [1412]
Result of charging 3s2200mah al 2.1A Download [0]
Picture wit result of charging 2x3s2200m Download [0]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!