Esta vela envergadura de 2 metros tarda 15 minutos para montar y dura toda la vida!
Las alas y la cola están hechas de espuma dura de EPO. Sin embargo, el fuselaje está hecho de un moldeado por soplado muy fuerte de la piel de nylon *, generalmente reservado para los juguetes del bebé, con formadores de madera contrachapada, lo que hace casi indestrucatable.
El fuselaje prácticamente indestrucatable es lisa y rigida y aún así lo suficientemente ligero como para que la vela se realice. Tanto el ala principal y la cola se atornilla en su lugar y las dos mitades de las alas tienen una varilla de fibra de carbono para una mayor resistencia.
El ala principal requiere 1 servo por los alerones de un fuerte movimiento en la superficie de control y además hay una ranura pre-moldeado para que pueda añadir sus propias aletas más tarde. Para completar este modelo va a requerir 4 servos 9g, un regulador de velocidad 30A, un outrunners, su propio transmisor y receptor (Tx / Rx) y una batería de 1300 ~ 1800mAh Lipo.
Esto realmente es un planeador súper fuerte que tarda 15 minutos para poner juntos.
Envergadura: 2 metros (78.74inch)
Volar Peso: 980g
Servos: 4 x 9 g (requerido)
Motor: sin escobillas 2815 / 1050Kv (Obligatorio)
ESC Incluye: 30A (Obligatorio)
4 x 9g servos
2815 / 1050Kv motor sin escobillas con un eje de 3mm
Lipoly 1300 ~ 1800mAh 3S
Tx / Rx
* Tener un fuselaje moldeado por soplado en un planeador es una excelente solución sin embargo no es muy popular entre los fabricantes debido a su alto costo, doblando así los costes de moldeo.
SKU (Número de Referencia):
Peso ( g)
Motorsize ( diam - o - cc )
Envergadura ( mm ):
SaleWeight ( g )
Marco / PNF / RTF ( mm )
IC / 2 : Elec:
Capacidad ( mAh ):
- SKU (Número de Referencia):
I really love this plane to look at however after 6 months and 3 attempts to put an ESC / motor combination I cannot get this thing out of my garage and into the sky as I keep burning motors and ESC. The plane is getting EXPENSIVE as I cannot get anything to work in it. I would REALLY appreciate anyone providing me with URL's to an ESC and motor combination that they KNOW works in this plane...
Desperate Pilot !Bought one of these as a upgrade from a axn ..started building it and found that the rudder servo hole is not for a 23mm body servo .i had to order a 28mm body to fit ...might just be mine but check before starting your build or like me yours will end up sitting there for a extra couple of days... Otherwise the rest looks good ...will update this after the maiden.I love this glider. Very smoothly shaped, good handling qualities. I especially like the sturdy extruded fusealage. I use it for fpv, I must say there is not a whole lot of space in there and fitting everything in is a pain (including osd), but definately worth it. On the plus side everything inside the fusealage is very well protected in case of a crash.
The only downside of the plane is the material of the beams in the wings. It's allumiun, quite heavy and it bends in case of crashes, but yeah that's ok for the price.
I bought this after the ASW28 and I find it is much better (although I liked the ASW28). Especially the canopy and the wing-fusoleage link which were of bad quality on the ASW.The glider i fantastic . i am lokking foward to make it fly ony for soaring. I will sent a sort video. I just buy it ony for soaring. I saw that glider soraring very good, and thats why i boutgh one.Well boxed, no damage on delivery. Very nice moulding all of which went together without a problem. Lots of carbon strengthening in tailplane, wing joiners carbon and ply making for a strong, rigid airframe. Even control pushrods for rudder/elevator pre installed. Optional flaps activated.
First flights today in moderate breeze using a 2200 3s lipo and supplied folding prop. No issues noted after small amount of trimming. Nice stable flyer with good glide angle. Easy to land on the spot. Overall excellent value for money.Today, I unfortunately crashed this glider. Fuselage was still completely intact, including my electronics (phew!), but the wings are totally destroyed. It probably went out of range and/or speeds were to high for the glider to handle, so it went in an uncontrolable spin and crashed in some trees. But... looking back, I've had quite some fun with this glider for more than a year! It glides very smoothly and has a great flying characteristic. It absolutely defeated another 2m plane with gliding.
I'm seriously considering buying again! I'd really recommend this one for anyone looking for a good glider. You'll undoubtly have great fun with it.1.) Wing halves are demaged (dents) caused by storing one wing halfe above the other. The grooves fit to the knuckles on the bottom side.
2.) One plywood bar is not lining up with the surface of the wing. I sent a RMA but HK told me to ship the item back for investigation, even they got fotos of the damage. I should pay for postage (at least 21 EUR). HK would refund only the product price. That means that I have to pay money for damage/bad quality even I am not the causer - never, ever.
Why do always I get the crap!