Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Pilatus PC-9 Warbird Trainer 1200 mm (PNF)

Generating Links

Pilatus PC-9 Warbird Trainer 1200 mm (PNF)

Precio:

Now save ahorra 0,00 € 0,00 €

194,63 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
267000001-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

El Pilatus PC-9 era una versión mejorada del anterior PC-7 ofreció a través de una cabina más grande con asientos eyectables, motor más potente, y una serie de mejoras estructurales. Ha sido utilizado por numerosos países como un avión de entrenamiento avanzado. Incluso se construyó bajo licencia por Beechcraft y utilizado por la Fuerza Aérea de los Estados Unidos como el T-6A Texan II.

Nuestro PC-9 llega a un enchufe y formato de volar, sólo necesitan un poco de montaje básico, instalar su elección de la batería y el sistema de radio que estar preparado para llevar a los cielos. El fuselaje EPO completamente moldeado va de la mano rápida y fácilmente con un mínimo de esfuerzo, requiere sólo un par de herramientas de mano. detalles escala agregan al realismo de este modelo incluyendo antenas, líneas de panel, y una bonita hélice de 4 palas. tren de aterrizaje triciclo retráctil proporciona un excelente manejo en tierra, incluso en un terreno más áspero.

El mayor tamaño significa que va a manejar más viento, es bastante estable, y va a impresionar a todo el mundo en el campo. El acceso al interior del fuselaje para instalar la batería es a través de una gran escotilla de acceso que se abre y se cierra directamente desde el transmisor! El CES está precableado con un conector XT-60 listo para aceptar su 4S 14,8 V 2200 ~ 2600mah lipo. Después de eso, simplemente deje caer en su elección de transmisor de 6 canales y el receptor, hacer de configuración final, y volar!

caracteristicas:
• Enchufe y volar modelo - sólo tiene que añadir su elección de la batería y la radio
• la estructura del avión EPO completamente moldeado
• Escala de hélice de 4 palas
• Fácil montaje, corto tiempo de construcción
• engranaje principal retráctil
• Ampliación de fácil acceso ventanilla de la pila con una característica de apertura a distancia
• Warbird como rendimiento con una gran maniobrabilidad a baja velocidad

Especificaciones:
Envergadura: 1200mm
Longitud: 1.200 mm
Peso del vuelo: 1800g
Servos: 6 x9g micro
Motor: 3648 650 kv Outrunner
ESC: 45A sin escobillas

Necesario:
6 canales transmisor y el receptor
4S 14,8 V 2200 ~ 2600mAh Lipo batería w conector / XT60

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Chris | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 28, 2015

Poor quality. Only three of the servos leads were labelled, leaving you to guess where they go. Canopy, retracts and motor would not work. ESC is obnoxious with the continual beeping and carrying on. Paint doesn't match up between the two wings. Would not recommend.

Kai | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 20, 2015

Decent model by Unique Planes.
Flys a lot like a Trojan, but isn't one... so if you're looking for something a bit different, the PC-9/Texan II might be it.
Build quality is pretty good.. I found a decent build video on YT and had the thing ready to fly in about 40 mins.
Maiden wasn't too scary. Had a low-moderately windy day, but the PC-9 seemed stable.
All in all, not a bad trainer-type "warbird". Good alternative to the T28, anyway.

Oliver | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 06, 2015

Habe 4 Stck im cyber-sale gekauft. Der Aufbau ist einfach aber das Bugrad vom Fahrwerk musste bei 3 von 4 Fliegern nachgearbeitet werden. Die Anlenkung vom Bugrad ber einen Nylonfaden ist nicht sehr haltbar und wenig przise. Wenn alle Widrigkeiten des Aufbaus berwunden sind hat man ein recht gutmtiges Fluggert. Ersatzteile sucht man jedoch vergeblich, da muss man sich anderweitig helfen.

Tovin | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 31, 2015

Bought this plane during the half year sales at very good price, still very cheap with the added shipping cost added which local RC shop selling at double the price. This plane is very stable and easy handle, flying similar like a trainer. It can cruise at very slow throttle speed even at 50pcnt throttle with the original speed controller, motor and prop. Very efficient even with 4S 2600mah lipo, can get 8 minutes of flight time with average 65pcnt throttle. It can also cruise at higher speed like a war plane very good flight characteristic with easy take off and very smooth landing. The CG is at 2~3cm from the edge of wing depending the size of battery. Will need to cut the internal fuselage for correct placement of battery close to the elevator & rudder servo. With the correct CG it needs only very little trim and first take off is almost spot on on CG.

Frank | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 01, 2015

As much as I like this plane, the quality is just substandard. I've had six flights out of it, took it home and was going to take it out to fix the landing, and the landing gear control box won't work. I can't raise or lower the retracts and I went through all the connection with a voltage tester and there is simply no output to the gear servos. Problem now is that all the landing gear servos run off of two wires, of unknown voltage, the control box has the switches that reverse and -, and again there are no parts. I must now replace the complete landing gear set. I cannot recommend a purchase of this product now.

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 31, 2015

one servo broke while setting it up,so i replaced it, in addition I replaced elevator servos (same bad quality) and really bad when it gives up, I do not understand the purpose of the electric canopy.

The CG is, if you put everything where constructor meant it to be, in front of the leading edge, you really cant get it far back.

Wing is very soft and bends massively in the Air, reinforced with carbon,

Considering the price, its not good, but ok

Frank | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 29, 2015

Flown it now and it flys very nice. Very stable. There is no CG anywhere listed but I used a 4S 2200mah battery, which fit perfect, in the middle of the area for it and did have to adjust for nose heavy, but then it was fine. The landing gear, which is very solid is another pain that has to be fixed. the right wing gear is off by 10degrees and the nose gear is very loose causing the plane to take-off in an S curve badly. Power from the motor is good and so is speed, but the prop is 10.5X8 4 blade and that will have to change because of no replacements. Nose cone broke on first takeoff attempt when front gear compressed and hit the ground.
Looks good, flys fine, but has lots of issues and problems before you put it in the air. You are getting a plane made on Friday just before going home. Fix it and you'll like it. Not worth more than the sale price.

Frank | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 27, 2015

arrived safe and sound, packing was very good.
Instructions are what brings the rating down here, they are terrible. You are better off figuring it out on your own.
While its a nice idea to lift the canopy/battery hatch, it's not pratical because there are not wiring assignments/instruction on how everything is connected. Then the gear door servo is backwards - closes when it should open the door so that function now requires a servo reverser.
The fuselage and landing gear seam pretty robust. To put the whole thing together took maybe an hour. To figure out the wiring, 6 hours.
Now I just hope it flys well. Will report further.

David | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 09, 2015

Retracts do not (always) function.
Manual sucks (google translate) and is missing useful information:
- CG is not mentioned
- rudder throws not mentioned
- no explanation about the landing gear

Roy | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 10, 2015

This model has no C of G shown any where and the discussion section shows two different locations, in my opinion very poor.
The front landing gear leg has suspension which seems to work fine, but the grub screw that holds the servo horn to the front leg is into plastic only which means the steering nose wheel is not held correctly and the nose leg turns 90 degrees on take off flipping the aircraft onto its back.
Then where the front wheel bracket is held onto the bottom of the nose leg appears to be riveted but it has not held and the front wheel still turns sideways.
This weekend will be my fifth attempt to get this plane into the air, extremely disappointed with the quality seems poorly thought out.................

Roy Jury

  1. 1
  2. 2
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!