Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Piper J-3 Cub Balsa Wood RC Airplane Laser Cut Kit 1800mm (70")

Generating Links

Piper J-3 Cub Balsa Wood RC Airplane Laser Cut Kit 1800mm (70")

Precio:

Now save ahorra 0,00 € 0,00 €

89,12 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9099000082-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

The Piper J-3 Cub is one of the most recognized light aircraft in the world. The Piper aircraft company built the Cub in large numbers and was a favorite due to its simplicity, ruggedness, affordability, and great flying characteristics. The large wing enabled it to fly slow and gracefully. There are many examples still flying today and were used in every theater of war during WW2, with a distinguished history as an air ambulance, observer and was the last aircraft in air to air combat in Europe.



Our model captures the very essence of the Piper Cub, it has a solid yet lightweight framework structure built from balsa,  hardwoods and includes molded plastic cowl and windscreen. In addition, functional and authentic looking landing gear. For ease of construction, all the parts are beautifully laser cut so you can build the perfect model.  We have also included a pair of scale aircraft wheels, pre-bent and drilled aluminum wing struts, carbon tube wing spars and joiners plus a comprehensive hardware pack that includes nuts and bolts, servo horns, rods and connectors etc.The Piper J-3 Cub has been designed to use either a 42mm brushless outrunner motor with 500~600 watts of power or an equivalent gas motor, 4 standard size servos are more than adequate for the control surfaces.

 

 Overall this is a fantastic kit and due to its ease of construction, it is perfect for the seasoned builder or those with limited building experience. Once finished in an authentic covering such as the classic yellow and with the addition of scale accessories such as a pilot and instrument gauges this 1800mm or 6-foot Cub look the part and will turn many heads performing lazy aerobatics or low passes at your local flying field or RC flying club.



Features:
• Laser cut parts for accuracy and ease of construction
• Carbon spars and wing tubes
• Blown plastic cowl and glazing
• Spring loaded and functional landing gear
• Authentic wing braces 
• Comprehensive hardware pack 

 

Specs:
Wingspan: 1800mm (70")
Fuselage Length: 1150mm (45")
Flying Weight: 2200~2600g
Motor: 4250 / 600kv brushless outrunner motor or gas/nitro equivalent
ESC: 55A~80A suitable for up to 6S Lipo battery
Propeller: 14~15 inch
Battery: 3000~6000mah 4~6S Lipo battery

 

Required:
1 x 4250 600kv Brushless outrunner motor or gas/nitro equivalent
1 x 55~80A 6S electronic speed controller
4 x 17~40g servos (5 required if using gas/nitro engine)
1 x 12~14 inch propeller
1 x 3000~6000mah 4~6S Lipo battery
Covering material
Assorted glues
Assorted hand tools
Minimum 4ch transmitter and receiver 

 

 

  • Envergadura ( mm ) 1800.00
  • Piper J3 Cub 1800mm kit assembly
  • First Flight
  • Piper in Austria
  • Building phases of Piper J3 CUB kit with still images
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Ján | Comprador verificado

  • Overall
  • Quality
  • Value

Beautiful model

May 21, 2020

The Piper J-3 is a beautiful "parasol" kit. This lasecut is very complete, the wood is adequate quality. All accesories have been added, very complete box. You can change for more scale experience landing gear and the wheels, daschboard. This kit is for experienced modeler because of the limited manual, which is far below standard. For example the hinges of the door is shown on the inside, but then the door cannot open. The real plane has totaly different door. It does not matter. :)
For more scale it would by good to correct the wings tips. (for more piper look) The airplane fly with RAY G2 3548 /900 KV outrunner with RAY 70A ESC with 12/6 APC prop, and Zippy 3S 3700 mAh batt or Zippy 4S 3700mAh. There is lots of power.
I look forward to flying with it. Thanks HK!

Perentie | Comprador verificado

  • Overall
  • Quality
  • Value

Value for money

Dec 22, 2019

Mostly good, instructions sub-standard (missing and/or unclear steps). A few peices were bent but could be easily straightened. Overall worth the money.

Guppy | Comprador verificado

  • Overall
  • Quality
  • Value

Great

Dec 12, 2019

Excellent product

Neil | Comprador verificado

  • Overall
  • Quality
  • Value

This could be built by anyone if the photos were better and there were some cautions.

Dec 09, 2019

This is my first attempt at a balsa plane. I’m done with the fuselage and have started the first wing. The directions are limited to sequential photos and not all are clear or show accurate relation of parts. So far there have only been a few places where parts weren’t shown or timing of installation was unclear. So far nothing I won’t be able to get away with when it’s finished!

Mario | Comprador verificado

  • Overall
  • Quality
  • Value

Ottimo servizio spedizione veloce nessun problema

Nov 22, 2019

Prodotto di buon materiale completo di tutto tagli laser ok. Consigliato

Bob Holland | Comprador verificado

  • Overall
  • Quality
  • Value

Beautiful model, the builder must have experience because of the limited manual

Nov 18, 2019

The Piper J-3 is a beautiful model high-decker. The set is very complete, the wood is well and accurately cut by the laser. All accesiores have been added, very complete box. I have bought shoes for the rudders and a set of other wheels that do more justice to the model.
The builder must have experience with DIY because of the limited manual, which is far below standard. The hinge of the door is shown on the inside, but then the door cannot swing out. The real model also has a swing door!
You must also have (buy) all the electronics yourself and make a plan to incorporate this. You can see some examples on YouTube, take a good look at them. I bought a Turnigy G46 670 kv outrunner and an 80A controller for this.
I build on it with a lot of pleasure and I look forward to flying with it.

The Novice | Comprador verificado

  • Overall
  • Quality
  • Value

PIPER J-3 CUB BALSA WOOD RC AIRPLANE LASER CUT KIT 1800MM (70")

Nov 15, 2019

All the parts are top notch, the instructions however are useless!!

alfons | Comprador verificado

  • Overall
  • Quality
  • Value

PIPER J-3

Nov 14, 2019

Jsem velmi spokojen s kvalitou obsahu stavebnice. Stavba modelu byla úžasná. První let byl bezproblémový

alfons | Comprador verificado

  • Overall
  • Quality
  • Value

PIPER J-3

Nov 14, 2019

First Review

sam | Comprador verificado

  • Overall
  • Quality
  • Value

trés bon achat

Nov 14, 2019

découpe laser ultra précise, bois trés bien choisi, cad a pas du balsa qui se tord du regard pour chercher le poids minimum, pas du ois de charpentier non plus mais un mix plutot bien choisi pour avoir une structure solide. un plan super succin pour le fuselage. des accessoires complets, mais pour le coup lourds 'haubans en alu, jambe de trains), en résumé très bien et un avion qui présente un joli volume au final. pas encore entoilé

  1. 1
  2. 2
  3. 3
  4. 4
Archivos de clientes
notice piper cub Download [3]
Piper J-3 Cub Manual.pdf Download [3]
piper_j-3_cub_manual-2.pdf Download [3]
9099000082-0-Piper J-3 Cub Balsa Wood RC Airplane Laser Cut Kit 1800mm.pdf Download [307]
AILES PIPER J3 CUB .pdf Download [2]
AILES PIPER J3 CUB .pdf Download [2]
Werner 0.doc Download [30]
Werner 1.JPG Download [286]
Werner 2.JPG Download [291]
Werner 3.JPG Download [288]
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Related Tags

Accesorios