New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Print-Rite DIY 3D Impresora - Tabla de calor (200 x 200 mm)

Print-Rite DIY 3D Impresora - Tabla de calor (200 x 200 mm)

Discontinued Product

Please continue searching for a similar product.
SKU:
629000059-0
WANT FREE SHIPPING? Click here to find out more!

Print-Rite DIY 3D Impresora - Tabla de calor (200 x 200 mm)

Esta tabla climatizada (o cama) es una necesidad para su impresora Print-Rite DIY 3D existente, ya que ayuda a mejorar la calidad de su impresión cuando se utiliza ABS, PC y otros filamentos de alta temperatura. Es fácil de montar y se ajusta directamente en la cama de impresión.

Especificaciones:
Tamaño: 219 x 219 x 1,6 mm
GW: 0.85kg

Incluido:
1 x mando
cama de 1 x Calor
ABS vidrio 1 x
4 x películas de sílice
2 x Clips

  • SKU (Número de Referencia) 629000059-0
  • Brand -
  • Capacidad ( mAh ) -
  • Peso 1192.0000
  • Longitud 340.00
  • Packaging Width 70.00
  • Altura 260.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Update on this heater bed:
The heater bed wasn't heating up all the time. I ended up removing the connector to the heater and checking the continuity of the wires going to the plug and found that the thin power wire to the plug was not fitted correctly and wasn't making contact.
So check the continuity of all wires to the plug from the controller board when you get your heater bed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Update on this heater bed:
The heater bed wasn't heating up all the time. I ended up removing the connector to the heater and checking the continuity of the wires going to the plug and found that the thin power wire to the plug was not fitted correctly and wasn't making contact.
So check the continuity of all wires to the plug from the controller board when you get your heater bed.

Heater bed draws a maximum of 63 watts on my tests and can only be heated to a maximum of about 110c.
The duration of the heating will not last for the duration of long printouts. The time is not known yet, but will update later.
I've got a 250 watt power supply powering both the heater bed and the printer without any problems, so far.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Heater bed draws a maximum of 63 watts on my tests and can only be heated to a maximum of about 110c.
The duration of the heating will not last for the duration of long printouts. The time is not known yet, but will update later.
I've got a 250 watt power supply powering both the heater bed and the printer without any problems, so far.

Customer files
Print-Rite manual (Dutch) Download [717]
CoLiDo-Heated-Bed-Installation.pdf Download [303]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!