Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Turnigy Quad 4x6S 400W Cargador de Polímero de Litio CC solamente

Generating Links

Turnigy Quad 4x6S 400W Cargador de Polímero de Litio CC solamente

Precio:

Now save ahorra 0,00 € 0,00 €

93,02 €
Enviado desde:
  • USA
  • Global
Ya comprado
Tiempo estimado de llegada: Sin Hora Estimada De Llegada [ ? ]
Estado:
Sin existencias!
SKU:
9070000060-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

¡El Turnigy Quad 4x6S puede cargar cuatro paquetes de baterías simultáneamente! Los paquetes pueden ser de una variedad de tipos, como Lilo, LiPo, LiFe, LIHV, NiMH, NiCd y Pb. Un cargador de diseño de calidad con un equilibrio preciso y un sistema de menú intuitivo y familiar.


El Turnigy Quad 4x6 está equipado con 4 microprocesadores de alta precisión para cargar cada batería individualmente. Su eficiente sistema de enfriamiento garantiza un funcionamiento seguro durante todo el ciclo de carga. Todos los puertos funcionan de forma independiente entre sí para brindarle una gran versatilidad. Existe la posibilidad de equilibrar la carga de un paquete LiPo en el puerto 1 mientras se carga en serie una batería LiFePo4 o NiMH en el puerto 2 o muchas más combinaciones.


No hay razón para comprar cuatro cargas individuales. Turnigy Quad le ahorrará tiempo al cargar cuatro baterías a la vez.


Especificaciones:
Rango de voltaje de funcionamiento: 10.0 ~ 18.0V CC
Cambio de potencia: Max 100 Watts para cada toma de corriente (10A 100W x 4)
Potencia de descarga: Max 5 Watts para cada salida (2A 5W x 4)
Rango de corriente de carga: 0.1 ~ 10.0A para cada salida
Fuente de alimentación: 12V CC (batería de automóvil) / fuente de alimentación de CA (> 200 vatios)
Recuento de células: 1-15 Ni-xx / 1-6 Li-xx / 1-10 células de plomo y ácido (2 ~ 20V)
Drenaje de corriente para equilibrar li-xx: 300mA
Ventilador extractor de disipador de calor de alta velocidad.


Incluido:
1 x cargador Turnigy
1 x adaptador JST XH
1 x Adaptador TP / FP
1 x conector banana con macho XT60
1 x conector banana con macho XT90
1 x conector banana con macho JST
1 x conector banana con pinza de cocodrilo
1 x conector banana con 18AWG sin conector
1 par de pinzas de cocodrilo


Nota: Fuente de alimentación no incluida. Todos los accesorios que se muestran en la imagen están incluidos.

  • Turnigy Quad 4x6S Lithium Polymer Charger - HobbyKing Daily
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Ivanov C. | Comprador verificado

  • Overall
  • Quality
  • Value

A good charger with ups and downs

Jan 24, 2023

I bought the charger together with the parallel charging boards and after using the parallel boards I realized that I didn't need such a charger. Anyway, it is a good charger at the hobbyist's house and at the airfield.
Some observations about this charger:
1. You have to buy separately 3 JST XH adapters plus banana plugs to be able to connect 4 lipos on each port. The kit contains only 1 jstxh adapter
2. It has a cooling fan that works all the time and makes noise, so it is not good to use the charger in the bedroom at night if you want to sleep. After the warranty period has passed, I will install a switch to stop the fan when the charger is not full loaded
3. I used a 240w main psu unit and first the power source must be turned on and then the charger must be connected so that the low voltage error does not appear
4. The discharge rate is quite low, 5W on each port. Discharging a 2200mA lipo from the fully charged level to the storage level will take approximately 3 hours. ((will discharge this battery with a maximum rate of 0.3A even if you select a higher rate this will be the maximum for this battery)). It's ok if you're not in a hurry.
5. There is no manual charging option for nicd and nimh batteries, even though the manual says that there is a manual option, also at the end of the process, you can NOT see charged or discharged electric capacities of the battery at each cyclic
process.
HK mentioned after a discussion that these options were on an older version of the charger and that on the new version they were removed this options for security reasons. Another buyer specifies on the forum that it is not possible to return to the old software version to benefit from this options. Anyway, you can live without these options
6. IR test meter. I measured a lipo battery on each port and each time I got different results with big differences.
I don't know if it's ok like that
7. The buttons are a bit hard and cramped and located a little lower than the case and if you have thicker fingers they are a bit uncomfortable to use
8.The software has some glitchs. When you will use you will notice certain inconsistencies, like pressing enter and you notice decreasing the amperage and others which are difficult to explain. But they can be overlooked
9. I charged some older lipo batteries and the charging process had to be stopped manually, because the charger did not stop automatically. Although the batteries did not absorb current, the charging process did not end automatically.
This did not happen with the new batteries. Finally, the old ones returned after a few charge and discharge cycles

Charger | Comprador verificado

  • Overall
  • Quality
  • Value

Turnigy charger

Nov 24, 2022

Great charger easy to use. One slight down fall is the charging ports do not line up with the displays. After some use this is a non issue.

serge | Comprador verificado

  • Overall
  • Quality
  • Value

trés bien

Nov 11, 2022

parfait

Untanux | Comprador verificado

  • Overall
  • Quality
  • Value

Good budget 4in1 charger

Jul 08, 2022

Good simple charger, weak-point is cooling fan, its noisy and doesn't last very long.

Wayne | Comprador verificado

  • Overall
  • Quality
  • Value

Good product and great price

May 27, 2022

Very good product and a great price

Juanjo | Comprador verificado

  • Overall
  • Quality
  • Value

Cargador

Apr 06, 2022

Es el mejor que tengo, carga rápido

Perce | Comprador verificado

  • Overall
  • Quality
  • Value

I though it was 240v not having to connect to a battery

Mar 25, 2022

I have waisted my pension money

DP | Comprador verificado

  • Overall
  • Quality
  • Value

Turnigy charger

Feb 14, 2022

Excellent product, does the job but arrived in inadequate, damaged packaging.

Bruce | Comprador verificado

  • Overall
  • Quality
  • Value

Garbage

Jan 11, 2022

This charger is garbage. I used a 10amp 12V PSU and get "Input Voltage Error" on every port, just trying to balance charge a 3S 2200mah battery that is mostly full. Tried another PSU with the same result. Returning it. Took Hobby King 22 days to give this to the courier and another 43 days to ship this from Australia to NZ !!! Don't buy from this crowd unless you are in no hurry to receive the product.

Gabriele | Comprador verificado

  • Overall
  • Quality
  • Value

Turnigy Quad

Dec 01, 2021

I'm very happy about this charger.
It's able to charge lipo, Life,LiIon,pb, nmh battery, with or without balancer!
It works very fine. Five stars!!!

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 8
Archivos de clientes
Turnigy Quad 4x6S Charger 400W Manual Download [6]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios