New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Quanum Aquaholic sin escobillas profunda Regatas V 740mm (ARR)

Quanum Aquaholic sin escobillas profunda Regatas V 740mm (ARR)

Discontinued Product

Please continue searching for a similar product.
SKU:
9215000031-0
WANT FREE SHIPPING? Click here to find out more!

Cuando se trata de una acción sin escobillas barco de R / C, simplemente no hay nada mejor que esto!

El Quanum Aquaholic es el último barco que compite con profundo escote en V que ofrece alta velocidad, excelente manejo y asesino buena apariencia. La carrera inspirado esquema de pintura vibrante y calcomanías aplicadas por expertos están seguros de la atención donde quiera que vaya!

Un sistema de energía sin escobillas refrigerado por agua potente viene pre-instalado que proporciona una potencia extrema de la hélice. El motor es un outrunner que produce grandes cantidades de torque. Esto permite que el barco para conseguir en el paso casi instantáneamente al chocar contra el acelerador. El mecanizado de precisión del timón de aleación y servo de dirección elevado par de pre-instalado para la respuesta de la dirección hace quebradizo y mantiene el barco en posición vertical en las curvas difíciles.

El casco está construido a partir de ABS ligero y duradero - aquí es donde el Aquaholic se diferencia de los demás. El casco tiene un acabado brillante bellamente pintado al igual que la fibra de vidrio, sin embargo, se le ofrece a un costo mucho más bajo. Las calcomanías que se aplican antes de la capa transparente final, sellando de los elementos y proporcionar un aspecto de primera calidad.

Este barco estará listo para funcionar en unos 10 minutos después de abrir la caja, gracias al alto nivel de pre-montaje. Usted sólo tendrá que atornillar en el timón y la hélice, conectar el varillaje de la dirección, instale su receptor y ya está listo para ir!

Este es sin duda el más divertido, emocionante y fácil de barco de regatas configuración sin escobillas que hemos tenido en nuestras manos aquí en la oficina HobbyKing, sabemos que va a encantar también!

caracteristicas:
• Alto rendimiento sin escobillas refrigerado por agua sistema de energía
• esquema de pintura vibrante inspirado en las carreras
• Casco de ABS ligero
• Alto par de dirección servo
• accionamiento directo de 3 mm de eje flexible
• Desarrollado por un paquete de baterías de 2200mAh 3S LiPoly (se vende por separado)
• Casi listo para funcionar - sólo tiene que añadir su propio sistema de radio y la batería

Especificaciones:
Longitud total: 740 mm
Casco Longitud: 650 mm
Haz: 180 mm
Peso: 1140 g (w a cabo la batería /)
Motor: 2815 refrigerada por agua sin escobillas outrunner (incluido)
ESC: 50A sin escobillas refrigerado por agua (incluido)
Servo: tamaño estándar de alta torsión (incluido)
Material del casco: ABS

Incluido:
Quanum Aquaholic sin escobillas profunda Regatas V (ARR)
Todo el hardware necesario
Manual de usuario
hélice de repuesto
enchufe XT60
Herramientas

Necesario:
el transmisor y el receptor 2CH
batería de 2200mAh 3S LiPoly

  • SKU (Número de Referencia) 9215000031-0
  • Brand Quanum
  • Capacidad ( mAh ) -
  • Peso 2695.0000
  • Longitud 740.00
  • Packaging Width 250.00
  • Altura 330.00
  • Quanum Aquaholic Brushless Deep V Racing Boat 740mm
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This is a beautiful boat! Preparation starts with removing the flexdrive. I used Molyslip grease on the drive and then replaced it. The rudder assembly is next and is easy to do.
Threadlock was used on all screws and the propeller.

The water-cooling pickup tube is near to the hub of the prop so I cut off 6mm to increase the water flow through the system.

A Turnigy 3s 2200mAh Lipo is used and after a 10 minute run is only slightly warm.

If this is to be your first fast electric boat then I would suggest that you set your throttle high end point to 75pcnt and your rudder left and right end points to 75pcntand add some exponential for good measure. This will make the boat more manageable until you get the feel of it. Later you can reset the end points back to 100pcnt and get ready to seejust how fast and quick turning she is. Wishing you lots of fun!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a beautiful boat! Preparation starts with removing the flexdrive. I used Molyslip grease on the drive and then replaced it. The rudder assembly is next and is easy to do.
Threadlock was used on all screws and the propeller.

The water-cooling pickup tube is near to the hub of the prop so I cut off 6mm to increase the water flow through the system.

A Turnigy 3s 2200mAh Lipo is used and after a 10 minute run is only slightly warm.

If this is to be your first fast electric boat then I would suggest that you set your throttle high end point to 75pcnt and your rudder left and right end points to 75pcntand add some exponential for good measure. This will make the boat more manageable until you get the feel of it. Later you can reset the end points back to 100pcnt and get ready to seejust how fast and quick turning she is. Wishing you lots of fun!

Very dissapointed in the product....it came with the motor and esc unglued,just wiggleing around the boat....horrible glue job,spent half hour only cleaning the old glue ....the esc's return water hose is just cut in half...i guess i was just expecting more from HK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very dissapointed in the product....it came with the motor and esc unglued,just wiggleing around the boat....horrible glue job,spent half hour only cleaning the old glue ....the esc's return water hose is just cut in half...i guess i was just expecting more from HK.

Hi, I ordered this boat from Germany and it took only two days to be delivered.
Looks great!
I did some minor modifications, like i installed a BMS-620MG Servo and shortened the silicon tubes and rearranged them.
I would advice to check the screws and I used liquid thread lock from Tamiya.
Checking the cooling system, I found that there was a leak. There is a grub screw on the left side of the motor mount, again using thread lock and fixed it.
For the flex drive I use "robbe" shaft grease.

Spare props are available from e.g. Graupner, you only need a spacer (4mm to 4,75mm) and you can use them. Prop size is 40mm, pitch is 1.4.

Greetings

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi, I ordered this boat from Germany and it took only two days to be delivered.
Looks great!
I did some minor modifications, like i installed a BMS-620MG Servo and shortened the silicon tubes and rearranged them.
I would advice to check the screws and I used liquid thread lock from Tamiya.
Checking the cooling system, I found that there was a leak. There is a grub screw on the left side of the motor mount, again using thread lock and fixed it.
For the flex drive I use "robbe" shaft grease.

Spare props are available from e.g. Graupner, you only need a spacer (4mm to 4,75mm) and you can use them. Prop size is 40mm, pitch is 1.4.

Greetings

5/5 would recommend to anyone wanting a cheap an fun boat

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

5/5 would recommend to anyone wanting a cheap an fun boat

I just bought this boat and find that they have now taken AU$ 58 off the price I paid about two weeks ago. I will not be too keen to make major purchases off HK in future!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just bought this boat and find that they have now taken AU$ 58 off the price I paid about two weeks ago. I will not be too keen to make major purchases off HK in future!

Great first time boat. This is an awesome deal. The paint and decals will not disappoint. Very little build time. Easy to maintain. It will run on 3S or 4S, tape the hatch and i had very little water in mine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great first time boat. This is an awesome deal. The paint and decals will not disappoint. Very little build time. Easy to maintain. It will run on 3S or 4S, tape the hatch and i had very little water in mine.

Sehr schnes Boot, ich war ber die Qualitt erstaunt! Schn kompakt, alle bis auf ein paar Kleinigkeiten eingebaut. Luft sehr schn und recht schnell! Bin begeistert!
(Fahre mit Lipo 3S 2200mAh)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sehr schnes Boot, ich war ber die Qualitt erstaunt! Schn kompakt, alle bis auf ein paar Kleinigkeiten eingebaut. Luft sehr schn und recht schnell! Bin begeistert!
(Fahre mit Lipo 3S 2200mAh)

Sehr schnes Boot. Qualitt und Verarbeitung in Ordnung. Liegt sehr gut im Wasser und kann problemlos mit einem 4S Akku betrieben werden.

Motor-Regler Kombi gut Dimensioniert und lsst weiterhin auch Spielraum fr spteres Tuning ;)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sehr schnes Boot. Qualitt und Verarbeitung in Ordnung. Liegt sehr gut im Wasser und kann problemlos mit einem 4S Akku betrieben werden.

Motor-Regler Kombi gut Dimensioniert und lsst weiterhin auch Spielraum fr spteres Tuning ;)

Excellent product !
Made a deap review on my blog : http:// brushlessboat blogspot fr
It's crazy fast on a 4S -2650 Mah battery : you need high discharge rate batteries otherwise the motor stops when you ask for power.
3S or 4S 2650Mah Nanotech batteries are perfect for this boat
3S = 40KM/h
4S = 55KM/h

it's pretty fine on stock setup, no need to change anything, but you need to ckeck that watercoolness system works well (don't twist or cross the water durits) before going too fast !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent product !
Made a deap review on my blog : http:// brushlessboat blogspot fr
It's crazy fast on a 4S -2650 Mah battery : you need high discharge rate batteries otherwise the motor stops when you ask for power.
3S or 4S 2650Mah Nanotech batteries are perfect for this boat
3S = 40KM/h
4S = 55KM/h

it's pretty fine on stock setup, no need to change anything, but you need to ckeck that watercoolness system works well (don't twist or cross the water durits) before going too fast !

Supper Boot. Muss zuerst fertig abgedichtet werden. Ist leider nur aus Plastik und nicht aus GFK.
Lauft mit 3S richtig schnell, und mit 4S geht richtig die Post ab. Ca 65 kmh. Fr diesen Preis bekommt man nichts besseres. wrde es mir sofort wieder kaufen.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Supper Boot. Muss zuerst fertig abgedichtet werden. Ist leider nur aus Plastik und nicht aus GFK.
Lauft mit 3S richtig schnell, und mit 4S geht richtig die Post ab. Ca 65 kmh. Fr diesen Preis bekommt man nichts besseres. wrde es mir sofort wieder kaufen.

  1. 1
  2. 2
Customer files
No File Name Download [7033]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save