Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Quanum NEON 250 Carbon Juego de Estructura de la carrera Con los LEDs

Generating Links

Quanum NEON 250 Carbon Juego de Estructura de la carrera Con los LEDs

Precio:

Now save ahorra 0,00 € 0,00 €

42,02 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9323000077-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

El Quanum NEON es la evolución de la carrera de hardware FPV 250 clase. El NEON incorpora todas las necesidades, los lujos y la locura que usted podría desear en un exoesqueleto que compite con el carbón lleno durable estupenda.

El neón tiene Cyborg parece una tendencia lejos de los marcos de las placas medio apiladas de la temporada pasada. Y un perfil más bajo añade fuerza al tiempo que mejora la masa CG para el control crujiente.

El neón fue construido para competir con y diseñado desde el principio para una mayor durabilidad, hecha de carbono total, las pilas están montados juntos con muchos recursos de hardware CNC, haciendo de esta una fortaleza volante ... Con el blindaje del motor completamente cerrados y compartimiento de la batería. Todos los componentes están alojados internamente para la protección completa exoesqueleto de los golpes más duros. La parte delantera y trasera han CNC esmerilado difusores LED para un estilo de neón del resplandor así acelerando a fondo en el curso. La parte frontal compatible con una cámara FPV en el marco de hasta 30 mm. Las pilas de bastidor están separados por tan sólo 10mm de resistencia a la torsión, pero deja mucho espacio para la CES, FC, equipo de FPV y más.

El Quanum NEON es un tapón de la demostración en la apariencia, calidad, durabilidad y FPV locura.

caracteristicas:
• difusores delanteros y traseros LED CNC para un efecto de brillo de neón
• Construcción de placa de carbono con perfil bajo de la fuerza exoesqueleto
• compartimiento de diseño protegido del brazo motor y la batería
• Amplia gama de motores y de los apoyos de hasta 22 series y apoyos 6inch
• El hardware del CNC para el ahorro de peso

Especificaciones:
Distancia entre ejes: 250 mm
Peso: 155 g
motores: 1806 ~ 2206 (12 ~ 19 mm de montaje)
Objetos: 5 ~ 6 pulgadas
ESC: 10 ~ 20A
Cam FPV: hasta 31x13mm
LED: Azul frontal trasera roja

Necesario:
4 x Motors 1806 ~ 2208
1 x batería de 1500mAh 800 ~ 2 ~ 4s
4 x Hélices de hasta 6 pulgadas
10 ~ 4 x 20A de la ESC
1 x controlador de vuelo multi-rotor
de radio de 4 canales (6 canales recomendada para FPV y el uso FC)
engranaje de FPV (opcional)

  • Quanum Neon 250 Frame Kit----
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

tim | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 16, 2016

This frame looks great. But it's weak and breaks very easily. I bought two.... both are now trash. Pretty disappointed with my purchase, enough so that I have come back here to write this review warning others.

This frame has potential... but the design is such that cutouts in the base plate mean that the front arms are only attached by a couple of mm2 of material. The top plate only attaches to the front arms by one screw.

If you plan on using your quad purely for photography at minimal risk of crashing, then this frame will make it look badass.

Bartomiej | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 30, 2015

Great design. Good fit. Sadly you can't buy spare spacers, only screws. Original LED strips are not dense enough. only got 3 LEDs. It's not full carbon laminat. Inside it has glass fiber. only on top, and bottom there is carbon fiber. Big mistake is week nose section, because two forearms are hanging only on few milimeters of plate, which is main reason of destruction. You need to add your own carbon structure or something. Laminat is 1,2 mm thick, which would be great, if it was full carbon, now it's a bit weak. After all I think, that's more for the look, but it isn't bad product.

ulf | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 28, 2015

Generally a nice frame, but probably not suitable for fpv-racing. It cant even take a slow fall on grass, without breaking and shearing off screws.
Cannot recommend.

Reinis | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 21, 2015

Although this in very nice looking frame but its design is poor. I would even go as far as to claim that frame is made weak with intention! If you look at lower frame - notice that front of it is connected to whole frame with just two weak and thin carbon lines. I can not find other reason than intention to make this frame break for this poor design. Obviously - after crash front simply broke off.. And.. there are no spare parts available for this frame...

ad_wing | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 08, 2015

Quad perfeito para indoor noturno. Fica muito bonito.

Erwin | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 21, 2015

After destroying one frame in a very nasty crash ( both front arm came off ) I decided to buy 2 frames and double up all of the plates. It's nice and thick now it adds some weight to it but it is not dramatic it also makes it twice as expensive ofcource. I already put it nose first in to the ground a few times with pieces of propeller flying in all directions and one broken fpv antenna as a result but the frame is holding up nicely now, it never would have survived those crashes with just 1 bottom plate, Hobbyking should make a version off this kit with plates that are twice as thick as this one , beside that it is a great frame to fly and it looks really great in the air.

Erwin | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 21, 2015

After destroying one frame in a very nasty crash ( both front arm came off ) I decided to buy 2 frames and double up all of the plates.
It's nice and thick now it adds some weight to it but it is not dramatic it also makes it twice as expensive ofcource.
I already put it nose first in to the ground a few times with pieces of propeller flying in all directions and one broken fpv antenna as a result but the frame is holding up nicely now, it never would have survived those crashes with just 1 bottom plate,
Hobbyking should make a version off this kit with plates that are twice as thick as this one beside that it is a great frame to fly and it looks really great in the air.

|TAB| | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 01, 2015

nice and strong, enough space for everything

mrlee03 | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 22, 2015

After reading stories about how weak this frame is i still ordered one as it looks fantastic, i have been flying it now for over a month and had my first big crash with it today (lost orientation) 20-25 metre freefall and hit the ground nose first at 45 degrees. im delighted to say that it survived with minimal damage. the battery tray screws have bent slightly and that is all.

Great value
Great looking
Fun to build
Would recomend this to everybody, Everybody needs a neon 250 at least once.


However i would not advise this frame for close proximity racing (woods, abandoned building etc etc) only because it is highly likely that this frame will break in hardcore racing and crashing circumstances.

BOSS302 | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 18, 2015

for the FUN Factor it is good !! but if starting out? might be disappointed? not in a bad way? but it is a little geared if you been flying a little bit? this out of the way if your skills are good to Novice not a bad FRAME! this is one of my "Personal Favorates" now with the Superior CC3D Controller it has a Somewhat "Predictable Feel" and I use it for my FPV racing and just having fun thing, the I highly recommend NOT getting the KK-Mini board! of 3 we tried it did not like this "Frame"???? and the KK bigger one will NOT FIT it "Can" but probably not how 99.999999pcnt would like to fit, get the
"Superior NAZE or CC3D boards" and "SMALL" 12a ESC's ,I now have 3 and there my "GO TO" ones for just fun fly !! but starting out? this may not be for you? but good to have for when you feel more confident in skills !!

  1. 1
  2. 2
  3. 3
Archivos de clientes
No File Name Download [256]
Factory LEDs Download [512]
Factory LEDs Download [600]
Factory LEDs Download [797]
Factory LEDs-off Download [897]
Factory LEDs-off Download [857]
Complete no Fpv Download [2281]
ESC Wiring Download [2776]
Modification 1 Download [239]
Modification 2 Download [252]
  1. 1
  2. 2
  3. 3
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios