New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

RotorBits TRICOPTER kit con sistema de ensamble modular (KIT)

RotorBits TRICOPTER kit con sistema de ensamble modular (KIT)

Now save guardar 24,57 € 24,57 €

Special Price 4,24 € 4,24 €

You save guardar 24,57 € 24,57 €

Was  28,81 €

Estado:
Sin existencias!
SKU:
171000412-0
WANT FREE SHIPPING? Click here to find out more!

El hecho de que es posible que ya no caben en sus conjuntos de Legos y montador no significa que la diversión tiene que parar. La introducción de RotorBits, el conjunto construcción modular de un sinfín de posibilidades. Sobre la base de la idea de conexiones y dimensiones estandarizadas, el único límite a lo que puede ser construido es su imaginación.

Los RotorBits Tri-helicóptero es una ingeniosa adaptación de las piezas modulares RotorBits, para crear una toma única en la simplista volar tri-helicóptero muy querido y grande. Uno de los bits únicos utilizados en el Tri-helicóptero, es el mecanismo de inclinación artes de malla. El mecanismo de inclinación toma el conjunto de inclinación del motor previamente complejo y simplifica abajo a sólo dos engranajes y un servo. La unidad modular puede inclinación apenas se deslizan a cualquier eje RotorBits 10 mm. La placa central TRI colores brillantes ha 45x45mm postes de montaje para el controlador de vuelo y de diversas disposiciones de adaptación de otros accesorios, útiles integrado. Los patines de aterrizaje tienen un diseño de ruptura abrazadera plástica y la luna Lander pies taza redondeados para la diversión rozando suelo. La idea simplista modular hace que el montaje un broche de presión, con lo que la diversión de nuevo a una idea compleja a veces más.

RotorBits componentes se pueden intercambiar entre varios proyectos, lo que le permite mezclar y combinar al contenido de su corazón! A medida que su colección de bits crece y conceptos evolucionan, usted encontrará que las posibilidades son infinitas. ¿Quién sabe lo que va a llegar a la próxima! RotorBits es una idea que nunca puede ser obsoleto, sólo se reconfigurado.

caracteristicas:
• Modular deslizarse juntos la construcción
• Vidrio de nylon relleno de carbono y parte duradero
• El peso ligero
• Las piezas reutilizables y adaptables RotorBits
• engranaje impulsado de rotor basculante

Especificaciones:
Altura: 155 mm
Peso: 258g
Distancia entre ejes o tamaño: 555mm

RotorBits incluyen:
3 x mástiles del carbón
3 x pies de aterrizaje
3 x piernas de aterrizaje
1 x Tri centro de montaje
2 x soportes de motor DST
1 x montaje del motor servo de inclinación
1 x Bolsa de sujetadores de montaje y bandas de sujeción

Necesario:
3 x DST-1200KV o motor comparables
3 x 20A CES multi-rotor
1 x servo 9g
3 x 10 pulgadas apoyos 2 cw 1 CCW
Control de vuelo 1 x
1 x 1500 ~ 2200mah 3S 11.1V batería LiPoly
1 x sistema de radio 5 canales

  • SKU (Número de Referencia) 171000412-0
  • Brand RotorBits
  • Capacidad ( mAh ) -
  • Peso 630.0000
  • Longitud 330.00
  • Packaging Width 120.00
  • Altura 180.00
  • RotorBits TriCopter Kit With Modular Assembly System
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

cumple con mi expectativas. se ve fabricado con muy buena calidad y muy ligero.
deberia llevar los taladros del carbono hechos.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

cumple con mi expectativas. se ve fabricado con muy buena calidad y muy ligero.
deberia llevar los taladros del carbono hechos.

Surprisingly heavy and there is a lot of slop in the servo connection. Most of the slop can be removed by gluing the components together though. Quite enjoying it so far.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Surprisingly heavy and there is a lot of slop in the servo connection. Most of the slop can be removed by gluing the components together though. Quite enjoying it so far.

The RotorBits Tricopter is simple yet elegant and easy to put together! It's like Lego for big kids and can easily be assembled with little knowledge in the area. I love the colour scheme and it is easily orientated in the air. The landing gear is sturdy and the zip-ties hold together really well. My only criticism (and the reason I gave the quality one less star) is because I had do some rectification the servo-tilt section and the gears. The servo they recommended/showed in the picture did not fit in the servo bay and the nylon gear was far too small for the gear teeth and it was hard to fix. I ended up super-gluing it and it managed. HobbyKing perhaps release a new version? Other than that I love it. And it is great value for money!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The RotorBits Tricopter is simple yet elegant and easy to put together! It's like Lego for big kids and can easily be assembled with little knowledge in the area. I love the colour scheme and it is easily orientated in the air. The landing gear is sturdy and the zip-ties hold together really well. My only criticism (and the reason I gave the quality one less star) is because I had do some rectification the servo-tilt section and the gears. The servo they recommended/showed in the picture did not fit in the servo bay and the nylon gear was far too small for the gear teeth and it was hard to fix. I ended up super-gluing it and it managed. HobbyKing perhaps release a new version? Other than that I love it. And it is great value for money!

Brilliant bit of kit. Got me started and in the air nicely. very please. servo mount is a bit rubbish. but works extreeeemly well for the price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Brilliant bit of kit. Got me started and in the air nicely. very please. servo mount is a bit rubbish. but works extreeeemly well for the price.

Got one of these in the mail today... Very robust and well designed kit.
Decided to order another one to build for night flying with some led light strips.
Pretty easy to put together.. I used the KK2.1 control board and setting it up was a breeze..
I assigned the autolevel to my landing gear switch so I could easily switch back and forth for acrobatic modes.
I used plush 18 amp esc.. DT 700 kv bell motors and an orange spektrum compatible receiver with satellite Corna 929 metal gear 9 gram servo for the yaw.
10x4.5 slowfly props (2 CW and 1 CCW) and get an easy ten minutes with 2200 mah Turnigy batteries.
I give it a hearty two thumbs up.. (ps.. I didn't use the screws and bolts per directions
I simply drilled a pilot hole and tapped it for the screws on one side.
Built a battery tray with 1.5 glass plate cut 1.25 x 7" and suspended it from the bottom with wire ties.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got one of these in the mail today... Very robust and well designed kit.
Decided to order another one to build for night flying with some led light strips.
Pretty easy to put together.. I used the KK2.1 control board and setting it up was a breeze..
I assigned the autolevel to my landing gear switch so I could easily switch back and forth for acrobatic modes.
I used plush 18 amp esc.. DT 700 kv bell motors and an orange spektrum compatible receiver with satellite Corna 929 metal gear 9 gram servo for the yaw.
10x4.5 slowfly props (2 CW and 1 CCW) and get an easy ten minutes with 2200 mah Turnigy batteries.
I give it a hearty two thumbs up.. (ps.. I didn't use the screws and bolts per directions
I simply drilled a pilot hole and tapped it for the screws on one side.
Built a battery tray with 1.5 glass plate cut 1.25 x 7" and suspended it from the bottom with wire ties.

I have two rotorbits tricopters and they are excellent very tough. I would highly recommend them
great for general fun flying and they fly great with the KK2 and recommended motors. Thanks Hobbyling for a great bargain.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have two rotorbits tricopters and they are excellent very tough. I would highly recommend them
great for general fun flying and they fly great with the KK2 and recommended motors. Thanks Hobbyling for a great bargain.

Please do not overlook this frame kit !! I have built and crashed more multirotor kits then I care to admit to. This is the best kit I ever built. The first time that everything fit to a perfect match and ended up being one of the strongest one I have. Very Perice fitting of all components . May be a bit heavy . I love it !!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Please do not overlook this frame kit !! I have built and crashed more multirotor kits then I care to admit to. This is the best kit I ever built. The first time that everything fit to a perfect match and ended up being one of the strongest one I have. Very Perice fitting of all components . May be a bit heavy . I love it !!!!

Received my kit today. A bit disappointed as the carbon fiber rods that come with it don't have holes , so you have to either buy the jig set for it or drill the holes very carefull.

The kit is very neat and nice .It Seems to be strong enough to handle some crashes. But this I will find out soon.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received my kit today. A bit disappointed as the carbon fiber rods that come with it don't have holes , so you have to either buy the jig set for it or drill the holes very carefull.

The kit is very neat and nice .It Seems to be strong enough to handle some crashes. But this I will find out soon.

Awesome kit. My first multirotor and I was impressed with its quality. My only gripe was the servo mechanism. The recommend led servos do not fit without alot of fiddling around. Otherwise im happy with it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome kit. My first multirotor and I was impressed with its quality. My only gripe was the servo mechanism. The recommend led servos do not fit without alot of fiddling around. Otherwise im happy with it.

This was my first multi-rotor kit so i can't compare it to anything but i will say this i am happy with this kit. It was simple to put together and using the recommended electronics except for using my own servo it flies great . Very stable using the KK 2.1HC. The reason for 4 stars are because it did require some modification to the servo mounting area for my servo to fit properly as well as having play in the back area where the rear motor is mounted on. This was fixed using super glue :) Great product!!! Thanks Hobbyking!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This was my first multi-rotor kit so i can't compare it to anything but i will say this i am happy with this kit. It was simple to put together and using the recommended electronics except for using my own servo it flies great . Very stable using the KK 2.1HC. The reason for 4 stars are because it did require some modification to the servo mounting area for my servo to fit properly as well as having play in the back area where the rear motor is mounted on. This was fixed using super glue :) Great product!!! Thanks Hobbyking!!!

  1. 1
  2. 2
Customer files
No File Name Download [4430]
Theunsie'sTri copter Download [4430]
Total weight 829G,RobbotheDrifter Download [1396]
Y6 LAYOUT Download [99]
Y6 I Download [1007]
Servo Saver Download [176]
Fishing Line Download [120]
Manual Download [499]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save