Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

RX3S OrangeRX 3 ejes Vuelo Estabilizador

Generating Links

RX3S OrangeRX 3 ejes Vuelo Estabilizador

Precio:

Now save ahorra 0,00 € 0,00 €

14,57 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9171000102
¿Envío gratis? ¡Haga clic aquí! aprender más!

La utilización de un único gran precisión de 3 ejes giroscopio MEMS, el vuelo Estabilizador OrangeRX de 3 ejes es capaz de estabilizar el vuelo en casi cualquier aeronave de ala fija! Proporciona mayor estabilidad mediante la corrección automática de los canales de alerones, profundidad y dirección en vuelo. Esto compensa los cambios no deseados en la actitud de la aeronave debido al viento y otros factores. En pocas palabras, hace que su avión mucho más estable en vuelo!

El vuelo del estabilizador OrangeRX de 3 ejes es ideal para aquellos que tienden a volar en condiciones de viento, ya que compensar las ráfagas de viento que normalmente empujar su modelo alrededor. Es también un complemento ideal para su modelo FPV favorito para mantenerlo en el recto y nivelado durante el vuelo.

Esta unidad es muy fácil de instalar y utilizar. Los ajustes de ganancia ajustables están pre-establecidos en el 50% que ofrece la estabilización suave. Usted puede ajustar fácilmente la ganancia para cada canal como se desee para aumentar o reducir la compensación por el canal respectivo (AIL, ELE, RUD).

Porque diseñamos, fabricamos y prueba de estas unidades por completo en la casa (de 3D / 2D dibujo con el aprovisionamiento de materiales, montaje final, etc.) podemos controlar por completo la producción y garantizar la consistencia del producto desde el diseño hasta la de enviar el producto a usted. Además, la eliminación de los intermediarios ha significado que podemos impulsar un mejor valor en el mercado de venta al por menor y estas unidades en la fábrica (nuestros) precios!

caracteristicas:
Capaz de estabilizar el vuelo sobre casi cualquier aeronave de ala fija
Soporta el vuelo 3D sin socavar la estabilidad
ajuste de ganancia del servo independiente para alerones, profundidad y dirección
Fácil de acceso giroscopio revertir los interruptores en la parte frontal de la unidad
Diseño compacto y peso ligero

Especificaciones:
Tamaño: 51x32x14mm
Peso: 14g
IC: Atmega168PA
Gyro: 3 ejes MEMS
Voltaje de entrada: 4.8-6.0V
AVR interfaz: estándar de 6 pines
Señal del receptor: 1520us
Señal al servo: 1520us

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Foxyy | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 17, 2013

Great gyro, cheaper than buying 3 individual gyros and works better. I haven't had any flutter with it unlike some other gyros. It is very easy to set up using the pots. I mounted it on a gyro pad to reduce vibrations.

WayToo | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Feb 06, 2013

This is the only Hobby King product I have ever given a 5 crown rating. I bought three of these because the price was good but i was very surprised at how well they worked. I put the first one in a Bixler for experimental purposes and found that once you get it set up correctly the airplane becomes almost unconditionally stable in any wind. It does take a little time and effort to adjust the gain settings and they are not the same. I have more gain on the rudder than the ailerons and a bit more still on the elevator but when I put the Bixler in level flight it will maintain level flight. These are not an auto pilot but they actually work and are very good if you fly in wind the way I do. Thumbs up.

Bill | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Feb 05, 2013

Excellent value, have 6 of these, some I am useing the 5v bec in the speed controllers and 2 i am using them coupled direct to a zippy Life 1100ma 6.6v rx batt, i do not know the voltage tolerances but presumed they would expect you could run them in conjunction with their own range of receivers, have had over 20 fiights on this set up and it has performed faultlessly, certainly makes you look a better pilot than what you actually are, one thing i know is when most have packed up because of windy conditions i am able to keep flying and i am only a very average pilot, only time will tell if i am running too high a voltage with the 6.6 volt but until then i am having alot of fun

Emmanuel | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 27, 2012

I never imagined flying in strong winds but my friend encouraged me to try. Not a pleasant experience. I bought this stabilizer to aid my flights. Initially i almost crashed had no clue how it worked. Now i have a good understanding and fly in very strong winds with hands off the radio. Cross wind landings are fun, crabbed all the way with hands off the radio and even touch down crabbed...lol

Just change the attitudes and it holds. I mostly use rudder and elevator and the plane flies fine.

Only thing bothering me was during no wind days had to manually disconnect the stabilizer else not fun. But with the V2 this is also resolved, already ordered the day it came in stock. Just waiting for it to come.

Dan | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 14, 2012

I bought 2 and I'm impressed by the design. One of the dip switches didn't work on the rudder, so I put that one in my little beater jet, the other one works fine. I need a few more and see there is a V2 for 3 dollars more, I think I will try the new one and a megapirate flight controller for my FPV. I have also use head lock gyro's with real time gain but you need 3 to do the same job....you do the math, lol.

Yaroslav07b | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 13, 2012

This is a great product i highly recomend this for your plane

s.l.oliver | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 09, 2012

The stabilizer is quite easy to install and logical to use. However, i am Not Super happy with the single aileron channel. There are ways to use it - but I do not like it !

Emmanuel | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 06, 2012

I tried it on my supercub LP with park 480 in winds 20-25 knots. It was fun. Initially took a while to get the hang of it but after that its been fun fun fun... I do not use aileron option and use only rudder (90pcnt gain) & elevator (75pcnt). Just set your attitude and the plane stays there. I do my approach in strong winds without even touching the controls. Its so much fun. Now i have ordered the newer model with remote option to switch it off.

Ben | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 01, 2012

While I wish there was more on HK's website about the technical aspects of this flight stabilizer, I have to admit that it is great in the wind. I was able to float my Bixler in 40 mph winds and thanks to this stabilizer, I had to do very little inputs on my transmitter.

Does a good job for aerial photography, the main reason I bought it. Would be 5 crowns if more documentation was available.

vargasesteban | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 29, 2012

Very nice product , be careful with the gain it is very sensitive and dont forget to order the extentions from fre receiver to this Gyro
they are MALE TO MALE http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=21758

Archivos de clientes
ATmega168AP Download [608]
ITG3205 Download [1126]
No File Name Download [1447]
weight of board alone Download [741]
weight of case alone Download [649]
complete unit weight Download [782]
back of the board Download [769]
Orange Rx Manual R3 by MyCoolRC Download [145]
Larger Pic Download [127]
Larger Pic Download [109]
  1. 1
  2. 2
  3. 3
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios