El Ryan STA es un icono de la edad de oro de la aviación, reemplazando rápidamente el atractivo, pero insuficientemente alimentado Ryan ST (Entrenador de Deportes), la STA (Sport Trainer Aerobatic) ganó el Campeonato Internacional de Acrobacia 1937, dando lugar a un interés inmediato de los militares de EE.UU. , si tiene suerte, todavía se pueden ver uno de estos aviones de aspecto fantástico haciendo los circuitos de la demostración de aire.
Por otra parte, usted podría poseer y volar su propio! Nos encantó la STA Ryan Plug n volar tanto cuando se prueba que se convirtió en un favorito de todo el equipo. Hecho de EPO dura, realmente hemos puesto este modelo a su propio ritmo y todavía va fuerte! detalle escala es impresionante para un modelo de espuma, los enormes pantalones de la rueda, alambre aparejo, líneas de paneles y soportes de las alas dan una impresión de un modelo mucho más grande, tanto en el aire como en el suelo.
Hay un montón de potencia desde el motor de pre-equipada para la acrobacia clásicos como puesto de gira y rollos barril, sin embargo, el área de generosa ala STA lo convierte en un modelo magníficamente equilibrada que es igual de feliz que vuela a la velocidad de escala. Del mismo modo, la combinación / superficie de control servo pre-instalado es perfecta, el resultado es uno de los modelos más suaves de EPO que usted puede llegar a volar.
Longitud: 740 mm
Volar Peso: 670 g
Motor: 3128 1100kv
ESC: 30A w / BEC
Servo: 9g x 4
Sin escobillas del motor, ESC y Servos
Hardware (Las barras de control, cuernos, etc)
Llena de fotos Libro de Instrucciones
Su propio ~ 4 canales 6 canales de TX / RX
Batería 1300mAh 3S Lipo
SKU (Número de Referencia):
Capacidad ( mAh )
Peso ( g)
- SKU (Número de Referencia):
This is a disappointing plane. It look pretty, but is very heavy and underpowered. The plane is tail heavy, and to get the centre of gravity 40 mm from the leading edge (as specified), you have to add weight to the nose, even with the the 3S 1300 mah battery pushed far forward. Frankly, it flies like a brick - my advice is to choose something else which actually flies.Hi guys/
I was tempted to buy this guy. never flied lower wing but have 2 years of experience.
crushed it after 10 sec.
day after - 5 sec/
very hard to fly it. or maybe it is just me.....Fliegt Super! Accu 2200 mAh 3S ganz nach vorn schieben plus 35 g Blei fr CoG! 3/4 bis Vollgas. Weniger wird kritisch! Ich habe noch nicht geprft, ob der Motor getauscht werden kann, um Bleigewicht zu sparen etc.
Auf Graspiste muss der Flieger angeschoben werden: Radschuhe, kleine Rder.It will take off of short grass fields, and lands fine on them as well, just be sure to flare a bit just before touch down. Once trimmed out, she flew well, rolls, and highly banked turns were no issue. I could not make her loop though. She goes to the top of the loop, and does a funky roll and nearly stalls. I was high enough to catch it each time, so no damage done. I plan to move the linkage on the elevator to give me more throw on the next flight. She has plenty of power, so loops should be do-able. I did have a wire pop off, and didn't realize it until back home. Otherwise, a nice flying plane, and looks good in the air.I've had this plane about 5 months now. Not for beginners but good for taking the next step. I lost track of the number of crashes and mishaps but with all the glue and epoxy its still flying!(most of the wires are long gone) It will loop, roll, and fly inverted quite well, but set your rates low and expo high at first. The ailerons are very sensitive. I land it in grass so calling it a "landing" is a stretch. It doesnt like the wind very well either. It is a fun little airplane to fly.
I really liked the look of this plane. Very detailed EPO. The rigging wire should be double checked right out the box I found my mounts to not be glued in very well and after having tension on them for only a day had already came loose. Like another review stated definitely not a beginner plane. I know because I'm a beginner. It made it though my first major crash with only a broke wing added a spar and glued it back together but my second dirt nap sealed its fate. Tip stalled and broke wing in two places, broke firewall and snapped fuselage in half. Only if HobbyKing stocked spare parts. I would love to give this plane a second try. I still recommend buying this plane it is priced right and someone who has a little more experience could definitely have a good fun afternoon of flying with this plane. One last note it has the option for flaps so go ahead and grab you another two servos and install them.Although this model looks nice it is underpowererd on stock system ive upgraded motor still flys like a brickNice flying plane once you get it set up right. Fast enough and quite aerobatic. Cg is way off as usual. Very tail heavy. Gluing on the tail ass. helps, as does many other mods. Refer thread on RCG for details. Best cg IMO is right on the upper wing struts. Flies nice there, and not all pitchy. I use a 1300 3s nano pushed up hard against the firewall. Changed prop to 9x6 APC for more thrust. Added flaps as well. Good value for money if you are prepared to do a few mods.Received the model from the new Dutch warehouse. Very fast delivery (within 2 days). It took a bit more time to assemble as instuctions are not very detailed, so a few re-assemblies were required. Final finish is very detailed and nice to look at. Make sure you check the locking screws of the servo's, one was missing in my case. Make sure you do a proper CG check as I had to add 100 grams of weight in the nose. All in all very happy with the plane. Good flying!Check the files tab please for full details as the links wont post in the Reviews :) Should cover it all !!