New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

S3650-3300 sin escobillas Inrunner 3300kv (15.5T)

S3650-3300 sin escobillas Inrunner 3300kv (15.5T)

Discontinued Product

Please continue searching for a similar product.
SKU:
S3650-3300
WANT FREE SHIPPING? Click here to find out more!

Tamaño del motor: 3650
RPM / V: 3300kv (15.5T)
Carga máxima: 59A
Max Voltaje: 14.8 2 ~ 4s
Max Watts: 750
Resistencia: 0,0129

Diámetro: 36 mm
Frente Montaje Distancia del agujero: 25 mm
Montaje delantero Medida de rosca: M3.0
Diámetro del eje: 5mm
Longitud del eje: 16mm
Puede tamaño: 540
Tipo de enchufe: Bullet-conector de 4 mm
Peso: 222 g

  • SKU (Número de Referencia) S3650-3300
  • Brand -
  • Peso 290.0000
  • Longitud 140.00
  • Ancho 55.00
  • Altura 55.00
  • Kv (rpm / v) 3300.00
  • Corrientes max (A) 59.00
  • Resistencia ( MH ) 0.00
  • Max Voltaje ( V ) 14.00
  • Potencia ( W ) 800.00
  • Un eje ( mm ) 5.00
  • B Longitud ( mm ) 50.00
  • C Diámetro ( mm ) 36.00
  • Puede longitud D ( mm ) 50.00
  • Longitud Total E ( mm ) 66.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Comprei o motor, ele foi usado apenas duas cargas de bateria, digamos que algo entre 45 e 60 minutos, para minha surpresa, o rolamento frontal dele se desmontou, suas esferas foram atradas pelo m e prensadas contra os fios do enrolamento partindo vrios desses fios... Alem disso, apesar de ele indicar uma potencia de 750wts, perde feio em potencia para um clone dos EZ-run (3600Kv).
Vantagens: eixo 5mm, pinhes fceis de encontrar ( no Brasil) desvantagens: rolamento de qualidade duvidosa, potencia mediana.
S recomendo para on-road, onde dificilmente ter sujeira ou algo do tipo para detonar rolamentos, e em geral so modelos mais leves.
Ps.: montado em um DST/DBX convertido.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Comprei o motor, ele foi usado apenas duas cargas de bateria, digamos que algo entre 45 e 60 minutos, para minha surpresa, o rolamento frontal dele se desmontou, suas esferas foram atradas pelo m e prensadas contra os fios do enrolamento partindo vrios desses fios... Alem disso, apesar de ele indicar uma potencia de 750wts, perde feio em potencia para um clone dos EZ-run (3600Kv).
Vantagens: eixo 5mm, pinhes fceis de encontrar ( no Brasil) desvantagens: rolamento de qualidade duvidosa, potencia mediana.
S recomendo para on-road, onde dificilmente ter sujeira ou algo do tipo para detonar rolamentos, e em geral so modelos mais leves.
Ps.: montado em um DST/DBX convertido.

Fantastic item. I use them all the time. In planes, in quadcopters, in cars, in boats - you name it. Nice durable motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic item. I use them all the time. In planes, in quadcopters, in cars, in boats - you name it. Nice durable motor.

Use this in my Tamiya DT-02 buggy. Drilled out sprocket to fit 5mm shaft. Very good power and good quality.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Use this in my Tamiya DT-02 buggy. Drilled out sprocket to fit 5mm shaft. Very good power and good quality.

hammer motor,hammer preis

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

hammer motor,hammer preis

Espero que de certo em uma stampede!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Espero que de certo em uma stampede!

Otimo produto! Recomendo a compra!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Otimo produto! Recomendo a compra!

This motor is amazing. I installed it on the stock Trooper and got excellent results. The model has become much faster. She started jumping even on a small hill, and under hard acceleration the front part off the ground. All this on the battery Lipo 3S. Of the small negative - the motor is heated to 50-60 degrees, but it may not affect anything.From ESC to 60A and more will be just fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This motor is amazing. I installed it on the stock Trooper and got excellent results. The model has become much faster. She started jumping even on a small hill, and under hard acceleration the front part off the ground. All this on the battery Lipo 3S. Of the small negative - the motor is heated to 50-60 degrees, but it may not affect anything.From ESC to 60A and more will be just fine.

i,m planning too use this engine in a 70cm deep v hull with a 120a esc
And 2 5000 mah 2s 30c lipo's. Will this engine survive?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i,m planning too use this engine in a 70cm deep v hull with a 120a esc
And 2 5000 mah 2s 30c lipo's. Will this engine survive?

UWAGA niskiej jakoi oyska naleao by je wymieni na dobrej jakoci , oyska zatary mi i po 30 minutach pracy

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

UWAGA niskiej jakoi oyska naleao by je wymieni na dobrej jakoci , oyska zatary mi i po 30 minutach pracy

I bought this motor to use on a 4wd hpi mt2. It is a 2 pole motor with a 5mm shaft and a low kv rating. Overall appearance is good. I used it with a 2s set up. With a 16t pinion the motor got warm. Speeds were around 28mph. I would only recommend this motor for someone that has a 2wd car and is looking for better speeds over a stock motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this motor to use on a 4wd hpi mt2. It is a 2 pole motor with a 5mm shaft and a low kv rating. Overall appearance is good. I used it with a 2s set up. With a 16t pinion the motor got warm. Speeds were around 28mph. I would only recommend this motor for someone that has a 2wd car and is looking for better speeds over a stock motor.

  1. 1
  2. 2
Customer files
Ball bearing FAIL! Download [2606]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save