New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

S500 fibra de vidrio de 480 mm de Quadcopter Frame - Integrado Versión PCB

S500 fibra de vidrio de 480 mm de Quadcopter Frame - Integrado Versión PCB

Shipped From:
  • USA
  • Global
QTY:

Now save guardar 0,00 € 0,00 €

19,60 €
Estado:
En stock
Peso:
750 g
SKU:
426000002-0
WANT FREE SHIPPING? Click here to find out more!

Un excelente marco fuerte Quadcopter fibra de vidrio ligero con tren de aterrizaje y un tablero de distribución de energía bono (AP) construir-en el cableado ordenado y fácil. Este quad tiene 480mm centros motores por lo que es ideal para los 9 y 10 apoyos pulgadas y también tiene un montaje de la batería ajustable para lograr la perfecta distribución del peso y el marco inferior está dispuesto a adoptar toda una serie de soportes de cámara y cardanes lo que es perfecto para FPV y los proyectos de filmación.

El S500 se suministra con 2 x 2 x azules y negros brazos que son super camellones y tienen una varilla de fibra de carbono a través del centro de decisiones para los brazos más fuertes que hemos visto hasta la fecha en este estilo de marco. La brazos negros y azul hacen de orientación mucho más fácil y no hay necesidad de apoyos diferentes colores. El tren de aterrizaje incluido tiene un montón de altura por lo que es adecuado para cardanes tipo GoPro o similar. Otra característica de la S500 es que cuando se montan los brazos tienen un ligero hasta barrido, esto le da al patio de un efecto de diedro que ayuda a que sea muy estable, especialmente cuando se desciende de altitud.

Montaje de este marco es súper sencillo con mangas pre-roscado para todos los pernos del marco son necesarios ya no hay tuercas de seguridad. Se utiliza uno pernos de tamaño para toda la construcción que significa que sólo quiere un hexágono tamaño para el montaje. Otra característica es que las lengüetas de fijación, para los brazos que le permite alcanzar la perfecta alineación en la construcción. Los soportes del motor están listos para tomar una selección de motores con centros de los agujeros de montaje de 16, 19 y 25 mm, una vez más haciendo de este un marco muy universal, a un precio muy asequible.

Ofrecemos una gama completa de tarjetas multi-rotor de control de vuelo, motores, reguladores de velocidad, baterías, soportes de cámara y cardanes y mucho más. Echar un vistazo a los artículos relacionados para que pueda construir su S500 y saber que se va a realizar de manera brillante, que nunca ha sido tan fácil y asequible para obtener su quad en el aire.

caracteristicas:
• Construido a partir de fibra de vidrio de calidad y nylon poliamida
• Pre-roscado manguitos de latón para todos los pernos del marco
• Localización de fichas para los brazos
• Brazos de colores para la orientación para ayudarle a seguir volando en la dirección correcta
• Las conexiones de PCB integrados para la soldadura directa de los CES
• Fácil montaje

Especificaciones:
Centros motores: 480 mm
Altura: 170 mm
Peso: 405g (sólo fotograma)
Agujeros de montaje del motor de pernos: 16 ~ 19 ~ 25mm

Necesario:
4 x 28mm 800 ~ 1000kV motores
4 x 18 ~ 30A reguladores de velocidad
4 x 9x4.7 ~ apoyos 10x5
1 x HobbyKing® placa de control multi-rotor
1 x 2200mAh 3S 11.1V de la batería LiPoly o más.

  • SKU (Número de Referencia) 426000002-0
  • Brand Unknown
  • Capacidad ( mAh ) -
  • Peso ( g) 750.00
  • Longitud 290.00
  • Ancho 55.00
  • Altura 175.00
  • Quadcopter s500 review
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I've purchased this frame and after putting everything together I can say it looks sturdy and quite easy to set up, although it would be easier with a soldering scheme.

There's a little but, and it's the weakness of its landing gear. Two legs broke after a not-very-smooth landing. Anyway, the rest of the kit is good an looks nice once set up.

trending_up Value:
verified_user Quality:
playlist_add_check Overall:

I've purchased this frame and after putting everything together I can say it looks sturdy and quite easy to set up, although it would be easier with a soldering scheme.

There's a little but, and it's the weakness of its landing gear. Two legs broke after a not-very-smooth landing. Anyway, the rest of the kit is good an looks nice once set up.

I Purchased this as a first build from scratch for me. I read about the legs being a concern & thought they would be ok, However I have just completed my 5th flight & had a slight bounce on landing, next thing I know is the props hitting the floor ! The legs are in deed very weak.
I cannot stress how much this can put you off this machine, I would love to be able to put a different type of undercarriage on it!
Other than the legs everything else is spot on.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I Purchased this as a first build from scratch for me. I read about the legs being a concern & thought they would be ok, However I have just completed my 5th flight & had a slight bounce on landing, next thing I know is the props hitting the floor ! The legs are in deed very weak.
I cannot stress how much this can put you off this machine, I would love to be able to put a different type of undercarriage on it!
Other than the legs everything else is spot on.

I wanted to build a quad from scratch to fly a Gopro 4. Overall I'm happy with the product, but if I would have to do it again I would get a S550 hex and 4S battery because of the extra lift capacity. Without the gimbal I get 14 min of very gentle flying with a 3S 5000mAh nanotech battery and 10x4.5 props. With gimbal ~10 min.

Two things to consider are the screws are of poor quality, after assembling/dissembling the frame a couple of times during building the heads have worn out. Furthermore I have lost a couple of the screws during flight.. Secondly the legs are very poor quality and break very easily! The rest of the frame is very strong, I have a pretty bad crash and only the legs broke!

My setup:
Multistar 2216-800kv motors
MultiStar 30A BLHeli-S ESC
Gemfan 10x4.5 and 11x4.5 props
5000mAh 3S lipo
DJI Naza-m V2
DJI Zenmuse H3-3D

My gain settings:
[Pitch, roll, yaw, vertical]
Basic: 120, 120, 100, 120
Attitude: 100, 100

Angular rates: 200, 200

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I wanted to build a quad from scratch to fly a Gopro 4. Overall I'm happy with the product, but if I would have to do it again I would get a S550 hex and 4S battery because of the extra lift capacity. Without the gimbal I get 14 min of very gentle flying with a 3S 5000mAh nanotech battery and 10x4.5 props. With gimbal ~10 min.

Two things to consider are the screws are of poor quality, after assembling/dissembling the frame a couple of times during building the heads have worn out. Furthermore I have lost a couple of the screws during flight.. Secondly the legs are very poor quality and break very easily! The rest of the frame is very strong, I have a pretty bad crash and only the legs broke!

My setup:
Multistar 2216-800kv motors
MultiStar 30A BLHeli-S ESC
Gemfan 10x4.5 and 11x4.5 props
5000mAh 3S lipo
DJI Naza-m V2
DJI Zenmuse H3-3D

My gain settings:
[Pitch, roll, yaw, vertical]
Basic: 120, 120, 100, 120
Attitude: 100, 100

Angular rates: 200, 200

Very lightweight, easy to assemble. I love it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very lightweight, easy to assemble. I love it.

This frame is sturdy and easy to assemble, the legs are plastic but sturdy, However there is not much room for my Naza m lite flight controller. I mounted it on the bottom plate and the top plate pushes against the flight controller when I mount the top plate. I don't have any room to put my battery strap through the top plate. I wish HK would have put in the item description that this frame best fits slim flight controllers.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This frame is sturdy and easy to assemble, the legs are plastic but sturdy, However there is not much room for my Naza m lite flight controller. I mounted it on the bottom plate and the top plate pushes against the flight controller when I mount the top plate. I don't have any room to put my battery strap through the top plate. I wish HK would have put in the item description that this frame best fits slim flight controllers.

con este inicie en los quadcopter

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

con este inicie en los quadcopter

Great frame. Very stable and perfect for aerial video. I'm using 2212 motors with 9045 props (switching to 1050) and it runs smooth as silk. If no camera gimbal is used, ensure battery is slid forward to form a good balance. Landing gear are more fragile than toothpicks, but replacements are cheap and plentiful. The plates are rather narrow, pretty much forcing location of the FC to the top, but still well laid out.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great frame. Very stable and perfect for aerial video. I'm using 2212 motors with 9045 props (switching to 1050) and it runs smooth as silk. If no camera gimbal is used, ensure battery is slid forward to form a good balance. Landing gear are more fragile than toothpicks, but replacements are cheap and plentiful. The plates are rather narrow, pretty much forcing location of the FC to the top, but still well laid out.

Excellent frame, well finished, strong arms and the integrated solder point for the XT60 is perfect. I Just finished this frame with Naza Lite upgraded to Naza MV2( thanks Naza Upgrade Project!), Sunny sky 2212/13 980Kv, the new Flycolor 20A Raptors with Bl Heli, and 1045 Gemfan carbon nylon props. However the Naza will NOT fit between plates without touching so I added some spacers between bottom plate and arms. A couple of millimetres is all that's needed. Perfect combo on 3s power, and using the Multistar 5200mah I get approx 15 mins. Next will be adding a dual battery mount and testing some Nano Tech 4s batteries with 9045's. Great frame and for the money a super deal,highly recommended! Look forward to building the S550 for AP and FPV. Thanks HobbyKing

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent frame, well finished, strong arms and the integrated solder point for the XT60 is perfect. I Just finished this frame with Naza Lite upgraded to Naza MV2( thanks Naza Upgrade Project!), Sunny sky 2212/13 980Kv, the new Flycolor 20A Raptors with Bl Heli, and 1045 Gemfan carbon nylon props. However the Naza will NOT fit between plates without touching so I added some spacers between bottom plate and arms. A couple of millimetres is all that's needed. Perfect combo on 3s power, and using the Multistar 5200mah I get approx 15 mins. Next will be adding a dual battery mount and testing some Nano Tech 4s batteries with 9045's. Great frame and for the money a super deal,highly recommended! Look forward to building the S550 for AP and FPV. Thanks HobbyKing

I bought this frame as an entry into quad flying. It has survived several hard crashes only requiring a replacement landing skid. The screws going through the skid and into the lower part of the arms are a bit short and can pull out. I would recommend purchasing some screws a few mm longer if the frame is going to have a hard time. Very good frame to start with and probably very good for an experienced flyer as well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this frame as an entry into quad flying. It has survived several hard crashes only requiring a replacement landing skid. The screws going through the skid and into the lower part of the arms are a bit short and can pull out. I would recommend purchasing some screws a few mm longer if the frame is going to have a hard time. Very good frame to start with and probably very good for an experienced flyer as well.

I like the way the frame went together. I'm spinning 11x5.5 props using 35 series motors. FC is a pixhawk. It's very fast and stable. However, one of my arms had a manufacturing defect and broke as soon as I gave the motors some throttle. Replacement arms are only $5, so buy spare arms right off the bat.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I like the way the frame went together. I'm spinning 11x5.5 props using 35 series motors. FC is a pixhawk. It's very fast and stable. However, one of my arms had a manufacturing defect and broke as soon as I gave the motors some throttle. Replacement arms are only $5, so buy spare arms right off the bat.

  1. 1
  2. 2
  3. 3
  4. 4
Customer files
S500 PCB version Download [2962]
Mounting plate.jpg Download [1080]
No File Name Download [30]
S500 Ready to fly Download [130]
S500 manual Download [3614]
ready to fly Download [1]
IMG_20180328.jpg Download [272]
IMG_20180328.jpg Download [272]
S500 (SK450) Shark X6 FC Download [272]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save