Item used in photo shoot only - Non AU Stock item. Appears to be complete and unused in original packaging
No warranty available for this item.
Please do not ask questions as the item will be sold out within 24hrs.
No backorders allowed.
Scratch & Dent items are sold as-is. What you see in the photo is what you will get.
Because HobbyKing loses money on each Scratch/Dent item sold we cannot offer warranty or answer questions on these products.
Item will be deactivated once a 0 stock level is reached.
Please see product Multistar Elite 3510-350KV Carbon Case Multi-Rotor Motor for more details.
The Turnigy Multistar Elite Outrunners are designed with one thing in mind - maximizing Multi-rotor performance!
Multistar Elite motors are more than a fancy name. They are built using the highest quality components; from EZO Japan bearings, N45SH magnets, 0.2mm laminations, 180deg oxygen free copper wire, 0.005g balancing, precision windings, followed up with rigorous quality control.
This Elite motor raises the bar further with a lightweight, low inertia carbon fiber motor can to maximize control response.
Keeping the motor windings cool is always a primary consideration in motor design and this too has been optimised for maximum efficiency.
The motor comes complete with a custom designed prop adapter, bolts and ready fitted 3.5mm bullet connectors to make installation a breeze.
Lipo cells: 4~6S
Max current: 330W
Max Amps: 15A
No Load Current: 0.3A/10V
Internal Resistance: 0.16ohm
Number of Poles: 12N/14P
Lamination thickness: 0.2mm
Balancing spec: 0.005g or better
Bolt hole spacing: 16 x 19mm/19 x 25mm
Motor Shaft: 4mm
Dimensions: 42 x 10mm
SKU (Número de Referencia):
Peso ( g)
- SKU (Número de Referencia):