Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

600 mm Marco SEIS fibra de vidrio Hexcopter

Generating Links

600 mm Marco SEIS fibra de vidrio Hexcopter

Precio:

Now save ahorra 0,00 € 0,00 €

25,08 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
323000047
¿Envío gratis? ¡Haga clic aquí! aprender más!

El SEIS es un marco hexcopter de alta calidad que ofrece una gran apariencia y el rendimiento a un precio que no puede ser mejor! Construida casi en su totalidad de peso ligero de fibra de vidrio rígida sin embargo, los seis ofrece una gran combinación de ligereza y resistencia.

Este marco hexagonal cuenta con patas de apoyo ajustables que le permite ajustar el marco para adaptarse a sus necesidades. Puede deslizar las patas de apoyo hacia los bordes para que sea más estable en el suelo y también se puede ajustar la altura.

La capacidad de elevación adicional de una configuración hexagonal que hace que este marco ideal para llevar las cargas útiles más grandes, como los sistemas de cámaras y otros componentes electrónicos. Esto lo convierte en una plataforma de la cámara excepcional o simplemente un marco multi-rotor muy ágil y potente para la acrobacia!

Ofrecemos una línea completa de productos electrónicos de multi-rotor tales como tablero de control multi-rotor, ESC, motores y mucho más, por lo que nunca ha sido tan fácil y asequible para obtener una hexcopter en el aire!

Todo el hardware necesario está incluido, sólo tiene que añadir su propia electrónica.

Especificaciones:
Peso: 625g (marco sin electrónica)
Ancho: 600 mm
Agujeros motor de pernos: anchura 19 mm

Necesario:
tablero de control Multi-Rotor
20 ~ 35A brushless ESC x 6
batería LiPoly 3 ~ 2650 ~ 4S 3300mAh
28-XX ~ 35-XX 700 ~ 1000KV motor sin escobillas x 6
~ 9x5 10x5 hélice - 3 estándar de rotación / 3 atrás

  • SIX Glass Fiber Hexcopter
  • Glass Fiber Hexicopter
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 09, 2015

The frame arrived well-packaged and took 15-30 minutes to easily assemble. Instructions were not included but there are some under the 'Files' tab. Have not yet tested this frame for vibrations, but it is likely to produce little - I found that all joins were tight and rigid. Great value for money.

Dave | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 28, 2014

Just got the kit today and on first impressions looks good.
The one BIG problem, which I thought may have been rectified following the last review, is there is NO plans with the kit.
This may not be a problem for some, but, for people like myself who are disabled, it can be a daunting task trying to put together the hundreds of small parts without any reference.
Please guys, it may be little cost for a good product but I for one, would gladly pay a few coppers more to have a couple of sheets of paper with information on how to put the thing together.

Stefan | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 07, 2013

First off I was really happy with it, eventhough landing gear is totally crap and will not survive any rough landing.
Motor mounts are loosely fitted to booms.
The booms will twist and wobble wich causes tremendous problems for a bit heavier model, I flew with about 3Kg total weight, with intermittent problems normally caused just after high power thrusts, this was traced to wobbling arms due to the high power torque, FC then tried to compensate an unstable frame.
at 3.5Kg the model was unflyable resulted in crash and broken arm beyond repair. No spare parts are available as of now.

Now I'm using the center soucer parts with custom ALU square booms

Bryan | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 04, 2013

Annoying issues with a few of the aluminum spacers they were mis-drilled and wouldn't accept screws from the one of the sides. The landing gears are EXTREMELY frustrating as they are very hard to lock into place where you actually want them they also do not move very freely. It took serious sanding just to get the parts to fit together. Overall though it was a good bargain considering the cost and strength of the materials.

Luis Alvarado | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 29, 2013

This kit is outstanding. Very easy to assemble. I was able to build it in 15 to 20 min with motor. Now I need to add everything ells. Cant wait to fly it. Very nice

Supersepp | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 02, 2013

MoinMoin!
Dieser Hex ist vom Preis-Leistungsverhltniss ganz gut. Leider gibt es auch Makken... Bei einigen Alu Bolzen war das Gewinde so krumm geschnitten das ich sie entsorgen musste. Ansonsten funzt der Zusammenbau ganz gut.
Beim Landen unbedingt drauf achten das das Aufsetzen immer sehr vorsichtig erfolgen muss! Das Landegestell ist sehr zerbrechlich und grazil.
Alles in allem passt der Hex schon...

Simon | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Feb 10, 2013

This is a great hex frame however you need to remember you are spending 20! A little bit of sanding is needed to get the legs to fit correctly (very simple) and there are no instructions..... not too difficult once you stop and think. Dont rush the build or think it is a 2 minute job!! Looks GREAT when built and nice size. I'll let you know how it flies!

Mistei | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 04, 2012

Der Hexcopter macht einen sehr stabilen Eindruck, der Zusammenbau ist auch ohne Anleitung uerst einfach. Da es sich hier um meinen ersten Multicopter handelt, bin ich auf die Flugeigenschaften sehr gespannt!

srepfler | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 15, 2012

Easy to assemble,
good quality of fiberglass,
fit and finish close just some little sanding for tight fit.
For KK2 need to drill holes on top plate.
Fly good, strong frame,
no vibration,
plenty of space for mounting.

Archivos de clientes
Manual - SIX Glass Fiber Hexcopter Frame Download [1338]
SIX Hexcopter Assembly Manual Download [1338]
SIX Hexcopter Assembly Manual Download [1338]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios