New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Skymaster Plug and Fly Trainer (Balsa)

Skymaster Plug and Fly Trainer (Balsa)

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
9126000001
WANT FREE SHIPPING? Click here to find out more!

El Hobbyking Skymaster es una construcción tradicional, entrenador Balsa pre-cubierta con una diferencia, que es enchufe y volar, casi todo el trabajo duro ya está hecho!

El Skymaster es una acumulación rápida, incluso para un principiante, el motor sin escobillas outrunner, ESC y la mayoría de los servos han sido pre-instalado, sólo tiene que seguir las instrucciones que se incluyen y que estará en el aire en poco tiempo! Al ser una construcción de hoja tradicional, el Skymaster es resistente y fácil de reparar en caso de tener un momento Uy, lo sabemos, volamos uno casi cada fin de semana! El tren de aterrizaje es una cuerda de piano adecuada y es tan resistente que puede manejar cualquier cosa hasta 4 ruedas "ligeros, incluso para los campos de aviación más desagradables!

El Skymaster tiene un montón de energía y maneja excelentemente, tan bien que una vez que un nuevo piloto ha logrado llegar a enfrentarse con los conceptos básicos, un movimiento de las tasas de cambiar y usted tiene un modelo deportivo poco brillante para el dominio de maniobras acrobáticas básicas. El Skymaster es un modelo de vuelo fantástico con ese cierto "algo" que sólo los modelos de balsa pueden ofrecer, diversión y dura con un gran rendimiento, este es el ideal todo terreno tanto para la pista de aterrizaje del club o de parkfly!

caracteristicas:
Balsa de construcción tradicional con Tough fuselaje con toldo
Rápido tiempo de construcción
Plug and Fly - Basta con añadir Reciever y Lipo (no incluido) y la mosca!
Piano dura alambre de rodaje
Excelente manejo de tierra
Control total de cuatro canales
Capaz de acrobacia aérea
Un montón de alimentación de la pre-Equipada sin escobillas Outrunner
Cubrir con pericia aplicado con excelentes Esquema Orientación

Especificaciones:
Envergadura: 1004mm
Longitud: 750 mm
Volar Peso: 500 g
Servo: 9g x 3
Motor: 2822 1200KV sin escobillas Outrunner
ESC: 20A w / BEC

incluye:
Todo el hardware, la Propuesta de ahorro y Prop
Instrucciones
Adhesivos

Se requiere:
Su propio transmisor y Receptor de 4 canales
Batería 1300mAh 3S Lipo

  • SKU (Número de Referencia) 9126000001
  • Brand -
  • Capacidad ( mAh ) -
  • Peso 1627.0000
  • Longitud 800.00
  • Packaging Width 165.00
  • Altura 200.00
  • Skymaster Plug and Fly Trainer
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very good trainer plane, I was conversion it, using glow.10, without fuel 800gr, using MA 7x5 fly arround 25 minutes. good and stable flight even windy. It's my favourite plane!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good trainer plane, I was conversion it, using glow.10, without fuel 800gr, using MA 7x5 fly arround 25 minutes. good and stable flight even windy. It's my favourite plane!!!

Really good trainer. Easy and very fun to fly. This is also hard to damage (I crashed it on trees several times and still goes on).

Be sure to check all motor screws before fly.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really good trainer. Easy and very fun to fly. This is also hard to damage (I crashed it on trees several times and still goes on).

Be sure to check all motor screws before fly.

I bought 2 of thoes, Very easy to set up and very for anyone to fly, very good for beginners.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 2 of thoes, Very easy to set up and very for anyone to fly, very good for beginners.

Using a battery with 1300mhA 3s-15C can generated aprox. 19.5 Amps. This is very close to the capacity of the ESC (20A). I ordered one of the recommended batteries 1300mhA-3s-25C this could generated aprox. 32.5 Amps. Can this blow the ESC? Or is the max amps of the motor that should be below the max amps of the ESC (I read the rule of the 10pcnt)?
Thanks

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using a battery with 1300mhA 3s-15C can generated aprox. 19.5 Amps. This is very close to the capacity of the ESC (20A). I ordered one of the recommended batteries 1300mhA-3s-25C this could generated aprox. 32.5 Amps. Can this blow the ESC? Or is the max amps of the motor that should be below the max amps of the ESC (I read the rule of the 10pcnt)?
Thanks

The motor set screws got loose and the motor flew off even before fly. Luck? I recommend locking fluid on these screws since the same issue has been reported by others. Hope, a factory fix for new models.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The motor set screws got loose and the motor flew off even before fly. Luck? I recommend locking fluid on these screws since the same issue has been reported by others. Hope, a factory fix for new models.

this is an excelent plane with oodles of power perfect for learning on. just set up as recommended.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this is an excelent plane with oodles of power perfect for learning on. just set up as recommended.

Surprisingly good build quality, fuselage made out of 3mm ply. Glued both the main wing and tail, setup all servos had to make some modifications to the rods exiting the rear of the fuselage, made adjustment to elevator to suit the tail wheel. Had to move the rudder servo as the length of the control rod to rudder was too short. Set up with OrangeRx R415 Spektrum DSM2 Compatible 4Ch Micro Receiver and Turnigy 1500mAh 3S and as the manual didnt state the CG, set up at 1/3 of the wing width to which was 53mm, flight times around 10 minutes with the battery as far up the front as possible and this will be good for the beginner; I would purchase a spare prop and O rings as I can see this being the weak point for the beginner. 10 out of 10 for this one

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Surprisingly good build quality, fuselage made out of 3mm ply. Glued both the main wing and tail, setup all servos had to make some modifications to the rods exiting the rear of the fuselage, made adjustment to elevator to suit the tail wheel. Had to move the rudder servo as the length of the control rod to rudder was too short. Set up with OrangeRx R415 Spektrum DSM2 Compatible 4Ch Micro Receiver and Turnigy 1500mAh 3S and as the manual didnt state the CG, set up at 1/3 of the wing width to which was 53mm, flight times around 10 minutes with the battery as far up the front as possible and this will be good for the beginner; I would purchase a spare prop and O rings as I can see this being the weak point for the beginner. 10 out of 10 for this one

Absolutely wonderful trainer! Came in the mail with other stuff, packed very carefully, with no damage. Construction was simple, though instructions are poor at best. Switched wheels per the HK suggestion. Proper CG placement required battery pack to be fully forward. I would suggest either 3S1P 2200mAh or 3S2P 1300s. Both Setups ran well, and put the CG in the sweet spot. No wing drop on stalls, takeoff in ~25ft on dirt (baseball diamond). Never had to go to low rates. May switch out the floppy prop adapter for better thrust response, but it makes sense for a trainer. Best value on the market for a balsa trainer.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Absolutely wonderful trainer! Came in the mail with other stuff, packed very carefully, with no damage. Construction was simple, though instructions are poor at best. Switched wheels per the HK suggestion. Proper CG placement required battery pack to be fully forward. I would suggest either 3S1P 2200mAh or 3S2P 1300s. Both Setups ran well, and put the CG in the sweet spot. No wing drop on stalls, takeoff in ~25ft on dirt (baseball diamond). Never had to go to low rates. May switch out the floppy prop adapter for better thrust response, but it makes sense for a trainer. Best value on the market for a balsa trainer.

excellent avion. Facile a voler, beaucoup de puissance pour dcoller. Facile a assembler. S'assemble environ en 2hrs mme pour un dbutant. Le prix est vraiment interessant pour apprendre a voler et faire quelques acrobaties. Hobbyking est incontestablement un adversaire de taile dans le domaine des avion tlguid!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

excellent avion. Facile a voler, beaucoup de puissance pour dcoller. Facile a assembler. S'assemble environ en 2hrs mme pour un dbutant. Le prix est vraiment interessant pour apprendre a voler et faire quelques acrobaties. Hobbyking est incontestablement un adversaire de taile dans le domaine des avion tlguid!!

The Skymaster is my first balsa plane, after first owning foamies like the Bixler and Tek Sumo.



Out of the box I was very impressed with the quality. The covering looks great. Everything went together fairly easily, the only slight problem was that the main landing gear rods were slightly too long to fit flush with the fuselage. Had to get the Dremel cut-off wheel out and trim a few millimetres off for it to sit right.



One thing that is not good enough is that the manual doesn't mention a centre of gravity. Come on hobbyking that's a pretty important thing to include, especially for a trainer! I ended up entering all the measurements in an online CG calculator and decided on starting with a CG of 42 mm. It took a 1.8 Ah battery all the way forwards to balance at that point, so significantly more battery than the suggested 1.3. I'll try a 1.6 next to see how that affects flight.



I was a bit nervous with my first flight of a plane with wheels, but the skymaster made it easy. It flies great, feels a bit more "solid" in the air than the foam planes I've flown previously. Seems to be very forgiving on landings, a couple of mine have tested the landing gear, but there's a decent amount of spring in them to soak up the force. The 75 mm foam wheels worked great on the longer grass but I'm flying from.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The Skymaster is my first balsa plane, after first owning foamies like the Bixler and Tek Sumo.



Out of the box I was very impressed with the quality. The covering looks great. Everything went together fairly easily, the only slight problem was that the main landing gear rods were slightly too long to fit flush with the fuselage. Had to get the Dremel cut-off wheel out and trim a few millimetres off for it to sit right.



One thing that is not good enough is that the manual doesn't mention a centre of gravity. Come on hobbyking that's a pretty important thing to include, especially for a trainer! I ended up entering all the measurements in an online CG calculator and decided on starting with a CG of 42 mm. It took a 1.8 Ah battery all the way forwards to balance at that point, so significantly more battery than the suggested 1.3. I'll try a 1.6 next to see how that affects flight.



I was a bit nervous with my first flight of a plane with wheels, but the skymaster made it easy. It flies great, feels a bit more "solid" in the air than the foam planes I've flown previously. Seems to be very forgiving on landings, a couple of mine have tested the landing gear, but there's a decent amount of spring in them to soak up the force. The 75 mm foam wheels worked great on the longer grass but I'm flying from.

  1. 1
  2. 2
Customer files
Skymaster instructions Download [1807]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save