Estación de soldadura con la gama de calor ajustable con AUS Plug (UA de almacenes)

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 29, 2016

This is a very good station. Make sure however to order the soldering tip set too the standard provided tip is only for small jobs. Need a larger connector to solder you need a bigger tip. .

• Overall
• Quality
• Value

Customer Rated

Mar 14, 2016

I bought this long ago and its still working as the day I bought it. there is new soldering tips which make this station awesome especially if you're using big wires. the original tip is only suitable for small stuff, so if you're planning to solder big wires I suggest getting the soldering tips (10 different ones) along with this. I made small wooden tray I paint in black and Velcro taped the station and the holder to it. I bought this for a fraction of the price in the shops around my city

• Overall
• Quality
• Value

Customer Rated

Nov 06, 2015

Use multimeter follow this Hakko manual to check the heating element for faulty if u experienced the solder not heating. they are basically same/ similar item or u can download the manual from 'Files'. If the heating element faulty, just change / replace a new 1 will do.

<a href='http://www.hobbyking.com/hobbycity/store/uploads/387206055X129135X24.png' target=_blank>check faulty</a>

• Overall
• Quality
• Value

Customer Rated

Nov 06, 2015

Very good and worth it! Just change the power plug to normal 3-pin plug for use in Singapore/Malaysia.

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 27, 2015

Use it for wires only. Connectors like EC3/EC5 will be difficult

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 30, 2015

Bonsoir HK,

O trouver des pannes (pointes) de rechange pour ce joli matriel.

Merci d'avance.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 07, 2015

This soldering station is a direct copy of a brand named GOOT. It does work well but the recovery time between soldering joins is quite bad. You have to wait abit until the tip gets back to temp before soldering again.

• Overall
• Quality
• Value

Customer Rated

Mar 31, 2014

Great value, works fine after u open it up!! At first I thought I had DOA, plugged in, no heat, no light, nothing!
Opened up the cover and found the green wire from transformer output was loose.
Standard mini Tamiya type connector needed pushing back on to pcb. Voila, working fine.

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 23, 2014

Great little soldering iron. Good heat control for the price. Recommended for the small jobs

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 05, 2014

i love this iron. best one ive used. and the price? well, if i bought it locally...over 100 bucks!