Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • USA

Sonic 185 EP Planeador 1850mmn (PNF)

Sonic 185 EP Planeador 1850mmn (PNF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
3490 g
SKU:
Sonic185-PNP
Descripción
del

Este gran planeador mira está hecho de espuma dura de EPO y ser plug and fly, requiere un tiempo mínimo para el montaje.

Impulsado por un motor sin escobillas outrunner 200w que ha sido premontado, junto con el CES, este gran planeador de tamaño tiene un montón de energía para alcanzar altura rápidamente, que está lleno de cuatro canales y todos los del servo también han sido pre-instalado. El fuselaje cuenta con varillas de fibra de carbono fluyendo hacia abajo de la columna vertebral para eliminar la flexión y el ala extraíble 2 pc no sólo hace que Sonic práctica, sino que también cuenta con una gran carpintero ala CF para la rigidez.

Se trata de una excelente calidad y un gran planeador en busca de que es un buen tamaño, es barata de conseguir en el aire y va a durar para los próximos años, en el día correcto, Sonic dará horas de vuelo fantásticas con gran capacidad de vuelo, un gran PNF parapente que será de interés para todos los pilotos de RC!

Especificaciones:
Envergadura: 1850mm
Longitud: 1090mm
Volar Peso: 980g
Motor: 200w sin escobillas Outrunner
ESC: 30A w / BEC
Servo: 9g x 4

Se requiere:
Su propio canal 4 de TX / RX
Batería 1800mAh Lipo 2S

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    Sonic185-PNP
  • Brand:
    N/A
  • Peso ( g)
    3490.00
  • Longitud
    0.00
  • Ancho:
    0.00
  • Altura:
    0.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Mine arrived last week. Went together well. The box that the bird came in was a Rtf box and showed a 2200 mah 3 s. way to heavy. I used a 1800mah 3 s and added 3 large washers to the base of the rudder, one fitted to a slot cut in the tail skid. The other two are just stuck to the side of the tail. On the maiden I gave it full throttle and let it go vertical, no issues reaching a good altitude. I also covered the bottom of the fuselage with "glass repair tape", that's what it's called in Bunnings. This keeps the bottom of the fuse from getting all crappy. The wing flutter is a little scary, just watch your speed and all is good. Over all I think this bird is good value.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is my first plane and due to my inexperience it has taken some serious abuse but it repairs up really well. All the servos seem to be pretty tough I did strip one by glueing the rudder wire whilst repairing a break in the tail. It works really well as a glider but is very agile an acrobatic lots of fun. I am running a smaller prop and am using a 1300 3s battery instead of the 1800 2s recommended and I find it works real well and I can glide around for ages if I want to. It also seems to balance out a lot better too.
Big thumbs up have really enjoyed this plane. Would like to have one that I haven't beat up so much though
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The usual good service from Sydney. Very nose heavy, even with recommended 2 cell 1800 battery . Elevator pushrod binds so servo doesnt centre well. Solution : put elevator servo in rudder with direct pushrod to elevator...easy to route the cable in the foam. Flies well on 2 cell battery with sufficient power to get up to the thermals so no need for a 3 cell. None of the reported flutter in my plane. Overall a happy camper. Looking forwards to flying it on the slope
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.