Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

SU47 Doble 55mm Jet EDF (KIT)

SU47 Doble 55mm Jet EDF (KIT)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
1950 g
SKU:
SU47BRKT-KIT

Combine

essential items and
esc
battery
servo
Descripción
del

Desarrollado por Sokhoi en Rusia como un avión experimental para mostrar el caso de sus avances técnicos en el diseño de aviones de combate SU-47 utiliza una configuración de ala-barrido hacia adelante para una alta maniobrabilidad y altos ángulos de ataque.

Si lo que buscas es un chorro experimental EDF entonces el SU-47 cumple todos los requisitos adecuados. El diseño de ala en flecha invertida desafiante destacarse de la multitud chorro de EDF regular. También cuenta con doble cuchilla 55 mm 3 unidades del FED, con bisagras superficies de control y un compartimiento de la batería de fácil acceso el kit gemelo de 55 mm EDF SU-47 es un paso por encima de su jet foamie EDF regular. Usted necesitará 2 x 2040-4300kv motores sin escobillas con Inrunner 2,3 mm ejes para acomodar el ventilador de 3 palas, 3 x servos 9g (2 para superficies de control y 1 para la rueda de nariz orientable), una batería 3S1P lipo 11.1v 2200mah y su propia transmisor y el receptor (Tx / Rx) y una hora más o menos de tiempo de construcción.

Especificaciones:
Longitud: 1024mm
Envergadura: 750mm
Área de ala: 12.7dm2
Volar peso: 700 g ~
Ala Carga: 55 g / dm2
Conductos del ventilador: 55 mm 3 unidades Doble ventilador de la lámina (Incluido)
Batería: 11.1v 2200mah 20c (Obligatorio)
Área de la batería: 38 mm x 27 mm x 105 mm (MAX)
Servo: 3 x 9 g (Obligatorio)
ESC: 2 x 18A (Obligatorio)

Necesario:
Motor: 2 x 2040 4300kv sin escobillas Inrunner (con 2,3 mm del eje)
Servo: 9g 3 x
Batería: 11.1v 2200mah 20c 3S1P
ESC: 2 x 18A
Radio: Su propia Tx / Rx

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    SU47BRKT-KIT
  • Brand:
    No
  • Capacidad ( mAh )
    No
  • Peso ( g)
    1950.00
  • Longitud:
    870.00
  • Ancho:
    130.00
  • Altura
    455.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Pas facile pas conseill aux dbutants
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
low price for high class and good quality
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Attention!
I bought the engine for the aircraft to the shaft of 2.3 mm as it is written in the description.
Collet which is sold bundled with edf can be mounted on a shaft with a minimum size of 3 mm.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I haven't receaved my plane yet but have ben reading alot on it and it sounds like a good buy can't wate to get mine
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
fixed 2x 4.3k out runner motor, power shld be enough to lift the plane. look through the manuel but unable to find the c.g. anyone can share the c.g of this plane? thanks
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Update-Aug 2. I modified the airframe to accept a single fan just ahead of the area for the original two fan position. I used the T-2815 4800 KV with a 40 amp SC and a 2200 Nano. Internal ducting was easy using depron and plastic pop bottle parts with the twin exit/efflux tubes reduced to the same size of other single fan setups. No dead weight but I did fill the flimsy nose cone with expanded Gorrila glue. Excellent flight performance, easily over 100kmh, rolls perfect and lands well with a little power on. Easily my favorite jet now.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
OK, so this is not a good first EDF, I have gone through a series of misfortune and after making some repairs I have finally flown this. I have found the CG needs to be roughly 1/2 to 1" back from the wingtips. Since up elevator creates the effect of a aileron up wing spoiler as everything is connected by linkage. I have found that it helps to have some amount of down aileron at nuetral elevator so you get a flaps effect. This thing needs speed to get airborne so get some good esc's with heat sinks and some powerful motors. I had to use a 1300 Mah 3 S battery to get it off the ground and it was admittidly a short flight. If you wanted to have separate aileron servos and evelavtor servos the added weight in the back may help with the balance. It flew nicely once airborne. The one rock got sucked up and broke a fan blade so it didn't have the power it should have butwith high nose up I had good control. I'm thinking about buying a second kit now that I have some of the basic info to help it be more succesful. Hope you get one and sort it out so we can all learn from your efforts. !!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got this plane from FIY in ARF mode.

Built in less than 45min.

The stock EDFplusESC responded very well to 2.2 nano-tech 25C & Turnigy 2.2 20C.

The plane flies excellent, the only weak point is the front landing gear that is easily broken. I glued a piece of plywood with a hole to replace the plastic one.

Manouverability is superb. Rolls are absolutely axial, no bad tendencies.

Landings need to be done carefully with some speed .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Have had the pleasure of having two of these Used Hk foam safe and HK five minute eoxy. Hk esc, KMS inrunners from phase 3 F-16 Caorona 4ch synth RX Turnigy 9X TX.

Both hit the ground not on purpose. Cg no brainer built in with the placement of the battery tray 2200 HP 3S easy ROG.

Do not think I will try another

will probably put the power set in an A-10 kit

Happy landings
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I RECEIVED MY SU-47 KIT,IT APPEARS WELL DESIGNED,PARTS FIT PROPERLY.

THE ONE OBSERVATION HERE IS THAT THE EDF UNITS SUPPLIED WITH THE KIT ARE UNAVAILABLE ,THEY ARE DIFFERENT FROM THE USUAL 55 EDF UNITS IN A FEW IMPORTANT WAYS,IS THERE A WAY I CAN PURCHASE TWO ADDITIONAL UNITS,I DO NOT WANT TO USE A DIFFERENT STYLE UNIT.

Thanks

mike

mwb8345a@aol.com

Try to include as much data as possible.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
servo

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.