Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

T5692 Turnigy Pro Comp 1320kv sin escobillas del motor Inrunner

T5692 Turnigy Pro Comp 1320kv sin escobillas del motor Inrunner

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
1140 g
SKU:
T5660-1320
Descripción
del

Cuando se necesita potencia seria para su embarcación de gran perfomance de escala o un coche RC escala 1/5, no busque más que los inrunners serie Pro Comp Turnigy. Estos motores magníficamente diseñados ofrecen una alta calidad, de muy alto rendimiento y fiabilidad. El motor es re-armable y cuenta con tapas removibles, el eje del motor tiene una plana mecanizada y es de 8 mm de diámetro para soportar el par extrema producida por este monstruo de un motor!

Especificaciones:
Tamaño: 56x92mm
KV: 1320rpm / v
Tensión máxima: 30v
Las células LIPOLY: 8s
Eficacia máxima: 6000W
Corriente en Eficiencia Max: 190A
Corriente máxima (10s): 375A
Sin corriente de carga: 4.2A
Resistencia interna: 0,0043
Eje: 8mm
Peso: 813g

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    T5660-1320
  • Brand:
    N/A
  • Peso ( g)
    1140.00
  • Longitud
    0.00
  • Ancho:
    0.00
  • Altura:
    0.00
  • Kv (rpm / v)
    1320.00
  • Corrientes max (A)
    375.00
  • Potencia ( W ):
    6000.00
  • B Longitud ( mm ):
    92.00
  • Puede longitud D ( mm )
    84.00
  • Max Voltaje ( V )
    30.00
  • Un eje ( mm ):
    8.00
  • Unit Weight (g):
    813
  • C Diámetro ( mm )
    56.00
  • Longitud Total E ( mm )
    116.00
  • Resistencia ( MH ):
    0.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
BIG MOTOR , this motor is huge , running on a 150A controller , lowest speed current draw at 15 volts is just above 1 amp , max speed on 15 volts , current is just above 5.8 amps both readings on unloaded motor , great quallity , but better sleving over 3 main wires could be better , as one has split on mine , but i will replace it :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Running on 8s (esc is the Turnigy AquaStar 240A HV) in a 45" hull. The thing is scary!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this would go nice behind the hobbyking jet drive for large boats
oh yeah bring it on , 1/4 scale jet boats
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
All I can say is Wow! I wish it wasn;t winter and I could slip this bad boy into my 40" mono to test.

Definately NOT a leopard clone. Different core & windings 4 SURE!!

I haven't recieve my TP power motor yet to compare construction. I will follow up.

This motor has 16 steps as per other poster on this brand as opposed to 12 steps for leopard motors.

For once i am stumped as to who makes these?? Or which brand it is derived from unles HK actually did request a factory to make their own vrand.

I will have to consult some other motor GURU's to see if this is a 4, 6 or even an 8 pole like a Neu 2210.

Core resembles a Neu or Aqua craft UL1 motor in that looking from the outside in, it looks incased. Maybe I will take it apart but, I don't really want to at this time.

WIres that exit the rear vent holes should IMO be better insulated with lots more heat shrink or Med. to large size silicone fuel tubing. 4mm ID require and rear vent holes are approx. 9mm in diamter.

I wish they would tell us how many poles it is so I don;t fry an esc on testing!!!! LOL, will use cheapy esc on bench I guess.

More to come ! Merry X-mas!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.