New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Objetivo Drone v1.5 Avión FPV fibra de vidrio 1520mm (ARF)

Objetivo Drone v1.5 Avión FPV fibra de vidrio 1520mm (ARF)

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
411000001
WANT FREE SHIPPING? Click here to find out more!

El blanco teledirigido es un gran avión FPV que ha sido diseñado específicamente para el trabajo y no sólo es el kit barato para comprar, este pequeño modelo también es barata de conseguir en el aire.

* La nueva versión 1.5 Objetivo Drone ahora incluye una cámara domo transparente desmontable para la parte delantera del fuselaje. Este pabellón magnética permite un acceso rápido y fácil a la cámara mientras que proporciona protección contra los elementos y una vista sin obstáculos!

El blanco teledirigido cuenta con un fuselaje de fibra de vidrio que está abierto en la parte frontal para el montaje de la cámara, también hay una construida en la cubierta anti-reflejo. El modelo está diseñado para un motor de empuje como era de esperar y también cuenta con un mediados montados, portilla grande de la batería y el acceso a los equipos. El área grande y abierta fuselaje no sólo tiene un montón de espacio para su equipo FPV y LiPoly, sino que también proporciona un montón de batería y refrigeración ESC del fuselaje delantero abierto. El carro inferior es robusto, con tornillo en aleación de piernas en la parte trasera y una rueda de nariz orientable en la delantera.

El zumbido objetivo es una construcción bastante rápido, cables de extensión servo son pre-instalado en el ala de balsa, que está montado en una varilla CF y pegado con resina en su lugar. El hardware suministrado es completa y las partes generales recuento bajo, lo que significa que va a experimentar FPV en tiempo rápido doble. El blanco teledirigido, con su tailess, barrió ala es uno de los modelos FPV EP más inusuales e interesantes de su clase y aún está seguro de obtener la atención de la gente donde quiera que vuela!

caracteristicas:
• * Nueva Claro extraíble cámara domo Incluido
• Robusta de fibra de vidrio del fuselaje
• montaje de cámara de frente abierto con antideslumbrante de la cubierta
• Gran Montada del Medio Acceso Hatch
• Balsa Construido Wing & winglets
• resistente debajo del carro
• orientable rueda de morro
• menor número de componentes
• Todo el hardware incluido
• Configuración Pusher

Especificaciones:
Envergadura: 1520mm
Longitud: 500 mm
Volar Peso: 500g ~ 700g
Área de ala: 17.2dm2
Ala Carga: 29 g / dm 2 ~ 40,6 g / dm2

Se requiere:

Su Propia 4 ~ 6 Canal TX / RX con Elevon Mezcla
28-36 sin escobillas del motor Outrunner 1800 kv
3 x Servo 9g
30A ESC w / BEC
Batería 1300mAh ~ 2200mAh 3S Lipo
Equipo FPV

  • SKU (Número de Referencia) 411000001
  • Brand -
  • Capacidad ( mAh ) -
  • Peso 1715.0000
  • Longitud 870.00
  • Ancho 160.00
  • Altura 200.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Good fiberglass plane. But do not forget to glue front wheel mount, if you wish to start not from sling or hands. Have myself one and now i am preparing a sling for take-offs. Plastic camera dome is very thin and will break at first problematic landing. So, have in mind to make another one or have camera with landing protection.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good fiberglass plane. But do not forget to glue front wheel mount, if you wish to start not from sling or hands. Have myself one and now i am preparing a sling for take-offs. Plastic camera dome is very thin and will break at first problematic landing. So, have in mind to make another one or have camera with landing protection.

For $100 shipped, it's not all bad. After reading many forum threads and reviews, I thought it would make a nice FPV plane with a few mods.
Forget the landing gear. I'm mounting a belly pan and wing skids for grass landings. I'll use my JetaPult for launching.
As far as the power system, I'm installing an Electrifly .10 Rimfire motor with a CF folding prop on the back. Don't care if the outrunner motor is on the outside.
The plastic used for the camera pod is useless. Hazy and distorted view looking through it. Better to paint it grey and put the camera on top, or at least cut a hole for the camera to see through the hazy bubble nose. I'll also put some extra CF bracing on the wing joints, to help keep the wing from folding, under stress. I'm also thinking of adding two small v-tail like fins on the back, to add more stability.

Overall, it's built pretty good, with the exception of the camera bubble and landing gear.
If you don't mind making some mods, this CAN be a very good plane.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For $100 shipped, it's not all bad. After reading many forum threads and reviews, I thought it would make a nice FPV plane with a few mods.
Forget the landing gear. I'm mounting a belly pan and wing skids for grass landings. I'll use my JetaPult for launching.
As far as the power system, I'm installing an Electrifly .10 Rimfire motor with a CF folding prop on the back. Don't care if the outrunner motor is on the outside.
The plastic used for the camera pod is useless. Hazy and distorted view looking through it. Better to paint it grey and put the camera on top, or at least cut a hole for the camera to see through the hazy bubble nose. I'll also put some extra CF bracing on the wing joints, to help keep the wing from folding, under stress. I'm also thinking of adding two small v-tail like fins on the back, to add more stability.

Overall, it's built pretty good, with the exception of the camera bubble and landing gear.
If you don't mind making some mods, this CAN be a very good plane.

Over use of resin makes it nearly impossible to mount the motor internally. Significant modifications are required if you intend to do this. I cut out the firewall and rebuilt it to mount the motor inside for the clean look. Nice finish but my nose was "tweeked" and slightly twisted. Shouldn't be a problem but for $70 ive seen worse...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Over use of resin makes it nearly impossible to mount the motor internally. Significant modifications are required if you intend to do this. I cut out the firewall and rebuilt it to mount the motor inside for the clean look. Nice finish but my nose was "tweeked" and slightly twisted. Shouldn't be a problem but for $70 ive seen worse...

Customer files
No File Name Download [4025]
No File Name Download [4025]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save