Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

Tigermoth DH82A Rojo / Plata 912mm (P & P)

Tigermoth DH82A Rojo / Plata 912mm (P & P)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
1 g
SKU:
TigerM-RS-PNP
Descripción
del

La polilla de tigre puede ser mejor descrito como icónica, se desarrolló a partir de la polilla gitana muy exitoso y diseñado por Geoffrey de Havilland en la década de 1930 para cumplir con las especificaciones del Ministerio de aire para un nuevo entrenador preliminar para la RAF. La característica más notable que distingue a la polilla de tigre de DH biplanos similares es el ala superior barrido distintivo, lo que permitió un mejor acceso para un piloto mientras llevaba un paracaídas. La polilla de tigre se convirtió en un gran éxito en todo el mundo y fue utilizado por varias fuerzas aéreas, que no era sustituida por la RAF hasta 1952 cuando el DH Chipmunk entró en servicio, el "Tiggy" es hasta el día de una elección muy popular entre los pilotos en todo el mundo y se sabe que es gratificante para volar.

Esta polilla de tigre Hobbyking es una alta calidad, totalmente en el diseño de la casa y de desarrollo que son exclusivas a nosotros. Hecho de resistente EPO, es fácilmente la espuma más escala de la polilla de tigre disponible y está goteando con detalle escala moldeado. Lo suficientemente pequeño como para transportar fácilmente lo suficientemente grande como para tener todavía la presencia real tanto en el suelo como en el aire, que es el tamaño perfecto para un BIPE escala de espuma. Ser Plug and Fly, el motor, ESC & servos son pre-instalado y una gran parte del trabajo está hecho, pero sería justo decir que se requiere un poco más de trabajo de montaje que muchos modelos de FNP, que se puede esperar de una biplano.

Las características de vuelo de la polilla de tigre son simplemente excepcional, no le será difícil encontrar un modelo de espuma en su clase para que coincidan. Las excelentes servos 9g se adaptan perfectamente a las superficies de control y el motor bajo kv se adapta perfectamente a la "Prop 10 SF, que da a los lotes de la polilla de tigre de propiedad de lavado sobre sus superficies de control para un mejor control cuando se ice a la velocidad de escala. Del acelerador hacia arriba y acrobacias aéreas realistas son una sincronización, que apenas no se cansan de este modelo a escala magnífica. el Hobbyking "Tiggy" tiene de todo, la calidad, el detalle escala, practicidad, rendimiento sorprendente, tenacidad y se ve excelente, es una necesidad para la percha de cualquier Rc de la escala piloto y entusiasta.

Especificaciones:
Envergadura: 912mm
Longitud: 772mm
Área de ala: 24,2 g / dm2
Ala Carga: 26 g / dm2
Volar Peso: 620g ~ 680g
Servo: 9g x 4
ESC: 20A w / BEC
Motor: 28 mm 1000kV
Objeto: 10x4.7SF

incluye:
Todo Hardware
alambre aparejo
pegamento
Instrucciones
(Calcas al agua aplicado previamente)

Se requiere:
Su propio canal 4 de TX / RX
Batería 1300mAh 3S Lipo

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    TigerM-RS-PNP
  • Brand:
    N/A
  • Capacidad ( mAh )
    No
  • Peso ( g)
    1870.00
  • Longitud:
    965.00
  • Ancho:
    120.00
  • Altura
    305.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Salut,
j'ai achet ce modle, livr en 5 jours... Excellent. Le montage est un peu long et minutieux mais j'ai trouv a trs intressant. Attention bien vrifier l'emplacement de toutes les pices avant de coller. Notamment ne pas inverser les guignols des ailerons et ceux de la profondeur. Ca m'est arriv, cependant ce n'est pas grave il faut juste agrandir dlicatement les orifices. Il faut bien compter une semaine de montage car le collage se fait en plusieurs tapes (avant de coller certaines pices il faut attendre que certaines autres soient bien colles). La colle est trs rsistante mais lente scher, il faut tre bien patient c'est important. J'ai fait mon premier aujourd'hui, a se passe trs bien. un petit niveau de pilotage suffit.
Il a tendance monter spontanment, j'ai donc donn un peu de profondeur vers le bas. C'est vraiment un excellent rapport qualit prix. n'hsitez pas, et .... bon vol :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this Tiger Moth around 9th of November, 2012. It arrived to Czech from NL within 5 days, very nice. The airplane is beautiful in scale, easy to assemble, and relative easy to fly in slow speed especially after I install a 3-Axis gyro on it. But it has a strange tendency to pitch up, so I thought it might be due to tail heavy, so I add around 30 gram on head, then it only flies fast, stall when slower down. Anyway, it won't glide. Landing needs to adapt. It's not hard to fly, but need time to get used to its characters.

This airplane has 2 problems. First, it's surface is resistance to glue, especially to my own Epoxy and the epoxy they gave in box. The glued control surfaces are easily to come lose and lost control on mid air if I tried to do some fast fly and 3D. Secondly, The low wing is easy to break near central part. It's design fault. After several flight, it developed "stress fracture" without being crashed.

Conclusion, it's nice airplane for more tinker and patient type pilot. You need to pay attention to it and love it with regular maintenance, or it will break. And don't fly it in strong wind, don't push it too hard.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice little model flies well lots of lift took off like it was in a lift The one problem with it is very weak undercarriage struts They broke off on the first flight and I had to put metal forward struts on alongside the plastic ones Otherwise a lovely little plane The suggested battery will fly the plane for about 8 minutes
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is not a beginner plane. Make this like your 3rd or 4th plane. Looks great but will need weight in the noise. Will noise up and stall once flown. CG off, took over 4 hours to build. Poor instruction that does not come with model. There are NO spare parts of any kind for this plane. You stack it, that's it. Flies like a 3 legged dog.

Quality was poor, shoty glue job, lower wing very weak. Mine starting to develop stress crack along fuselage. Good value poor plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Drifter1949 22/06/2012 2:13:00 PM
Skymaxy and I bought one each and both have the same problem. When increasing throttle quickly, motor hesitates and RC system glitches. I think the prop is too large for the motor / ESC combination so I tried a 9x4.5 SF prop and I believe the problem has disappeared but need further testing to confirm.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got two of these, a yellow one for a mate and the red one for me.



No bent wings or gap in the fuselage like others have found, the packaging was very good as usual from HK.



The motors in both kits had been pushed in which made the prop shaft point up a little and caused the prop to rub on the cowl. Had to pull the mount back, epoxy it and tape it in place while it dried. The supplied glue was aweful, don't use it - I had aileron horns come unstuck in flight, but luckily it's so easy to fly that I could still land it.



After 3 flights one aileron servo has started to flutter. The elevator servo on my mates one has also done the same thing before it has even flown! The gear struts are also very weak where they join to the fuse, even epoxy doesn't hold the gear on during a light nose-over landing.



The moth does fly very very well however, just a shame about the quality of some of the components.a
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Regretfully plane is not silver and red but grey and red so I give only 3 crowns for HK to lie about the color. Maybe the writer is color blund?

Otherwise flies good and details are nice.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I maidened it at last. has good flight characteristics. But since control surfaces for the elevator and rudder are comperatively large, you have to adjust the EPA correctly, otherwise it makes sharp moves.

Lands like a helicopter under windy conditions :) not so enjoyable to fly it under extreme wind. A good plane for mild weather. Has good presence in the air. Very good choice for the money.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • TigerMoth DH82A Red/Silver 912mm

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Manual download now [675kb]
English Manual download now [675kb]

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.