New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Controlador de velocidad n65A BSC TP

Controlador de velocidad n65A BSC TP

Discontinued Product

Please continue searching for a similar product.
SKU:
HXTBSC65
WANT FREE SHIPPING? Click here to find out more!

Presupuesto;
Corriente máxima: 65A
FET: 15
Tiempo: 2/7/15/30
PWM: 8K
BEC: Opto única. sin BEC
Tamaño de la batería: 4 a 6 células Lipo.
Peso: 40 g

Entendemos que la etiqueta de la muestra ESC 70A, sin embargo creemos que es mejor no empujar este último ESC 65A.
Siempre pasa los siguientes CES máxima calificación actual.

MANUAL: http://www.hextronik.com/docs/S60_BESC.pdf

  • SKU (Número de Referencia) HXTBSC65
  • Brand -
  • Capacidad ( mAh ) -
  • Peso 80.0000
  • Longitud 0.00
  • Ancho 0.00
  • Altura 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

It has (sort of) stall protection, and still...
Burned out running NTM 35-48 900KV/815W on my e-bike in first two seconds.
Yes it is suitable for planes or helis, but do not hope for more. I doubt the 65 amps.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It has (sort of) stall protection, and still...
Burned out running NTM 35-48 900KV/815W on my e-bike in first two seconds.
Yes it is suitable for planes or helis, but do not hope for more. I doubt the 65 amps.

, !!!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

, !!!!!

, !!! !!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

, !!! !!!!

Simple,effective,does the job as expexted..I purchase this because I already has a HXT Bec. Very satisfied with it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Simple,effective,does the job as expexted..I purchase this because I already has a HXT Bec. Very satisfied with it.

I bought two of these. They worked fine, for some time. For me it was a waste of money, I hit the asphalt with the proppeller on a rough landing and ESC fried (both of them). If you want a cheap ESC, don't buy it, better buy a Turnigy 60A or similar which has overcurrent protection.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought two of these. They worked fine, for some time. For me it was a waste of money, I hit the asphalt with the proppeller on a rough landing and ESC fried (both of them). If you want a cheap ESC, don't buy it, better buy a Turnigy 60A or similar which has overcurrent protection.

Worst ESC that I have ever seen! 3 of 4 purchased units burnt at 40-45A! Very poor construction, FET's were bad soldered on the board, heatsink is piece of 1mm thick alu sheet. Money thrown out of window! I would never ever buy this piece of s t again. Supersimple ESC's are much better.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Worst ESC that I have ever seen! 3 of 4 purchased units burnt at 40-45A! Very poor construction, FET's were bad soldered on the board, heatsink is piece of 1mm thick alu sheet. Money thrown out of window! I would never ever buy this piece of s t again. Supersimple ESC's are much better.

I've mounted this ESC on my HT500T,
I don't suggest this item for heli because it doesn't have the
soft start.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've mounted this ESC on my HT500T,
I don't suggest this item for heli because it doesn't have the
soft start.

Super du...
A peine branch, mon recepteur n'est pas aliment...!

Chauffe beaucoup, et je n'ai pas vu mon hlice tourner...!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Super du...
A peine branch, mon recepteur n'est pas aliment...!

Chauffe beaucoup, et je n'ai pas vu mon hlice tourner...!!!

Purchased 2, easy to program, test run on 4s-6s just fine. Keep it below 50 amps!! Blew 3 fets of the board right at 55 amps for no apparent reason, esc was cool. Still for the money who cares if its a 50 amp.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Purchased 2, easy to program, test run on 4s-6s just fine. Keep it below 50 amps!! Blew 3 fets of the board right at 55 amps for no apparent reason, esc was cool. Still for the money who cares if its a 50 amp.

I have about 5 or 6 of these but the last 2 just burn out. Thank God just before taking off it started to smoke and quit. All the other ones are working Ok.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have about 5 or 6 of these but the last 2 just burn out. Thank God just before taking off it started to smoke and quit. All the other ones are working Ok.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 9
Customer files
Esc 65amp Manual Download [237]
S60_BESC.pdf manual Download [901]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!