New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

TrackStar 1/18 de la instalación Rendimiento de la escala 12T sin escobillas (5050kv)

TrackStar 1/18 de la instalación Rendimiento de la escala 12T sin escobillas (5050kv)

Shipped From:
  • USA
  • Global
QTY:

Now save guardar 0,00 € 0,00 €

32,78 €
Estado:
En stock
SKU:
9052000006
WANT FREE SHIPPING? Click here to find out more!

rendimiento TrackStar ahora viene en fácil seleccionar el paquete Combo!

El uso de un MCU Fast Silicon Labs y de alta calidad on-Semiconductor MOSFET de la TrackStar 18A ESC establece un nuevo estándar en alta calidad pero los CES de automóviles asequibles. Con una lógica inteligente MCU los CES serie TrackStar permiten extremadamente preciso poner en marcha el control y alimentación de posicionamiento hacia atrás desde el motor. En combinación con el motor de 4 polos calidad esto se traduce en que empezar muy suave y la aceleración y el par.

El Turnigy TrackStar 18A ESC también cuenta con una gran cantidad de opciones de programación que no se encuentra en un CES de este tamaño y se puede programar con facilidad a través de la tarjeta de programación Turnigy TrackStar (se vende por separado)

Especificación ESC:
Cont. Corriente: 18A
Burst actual: 25A
Tamaño del coche: 1/18 de
Batería: 2-3 célula Lipo / 4-9 de la célula de Ni-XX
L-BEC: Salida 5V / 1A
Tipo de motor: sin escobillas sin sensores
Tamaño: 30 x 26,1 x 13,8 mm
Peso: 26g (incluyendo cables)
Los enchufes del motor: Tipo de bala 3.5mm
Batería del enchufe: Requerido
Interruptor de encendido / apagado:
Reverso:

Especificaciones del motor:
Activa: 12T
Valor KV: 5050KV
Polos: 4
Diámetro: 21,5 mm
Longitud del motor: 37mm
Extender el diámetro del eje: 2 mm
Longitud del eje extender: 11 ± 0,5 mm
Peso: 60g
No se carga @ 7.2V: 2.2A
Corriente máxima: 34A
Resistencia (Ω): 0.027Ω
Capacidad de la batería: 2 ~ ~ 3S 7.4v 11.1v
Temperatura de funcionamiento: 80 °
Temperatura máxima de 130 °
Escala de coche adecuado: 1/18
Adecuado ESC: 25A
Espesor de laminación: 0.2X20mm

  • SKU (Número de Referencia) 9052000006
  • Brand TrackStar
  • Peso 145.0000
  • Longitud 130.00
  • Packaging Width 35.00
  • Altura 110.00
  • Kv (rpm / v) 5050.00
  • Corrientes max (A) 34.00
  • Resistencia ( MH ) 0.12
  • Max Voltaje ( V ) 8.00
  • Potencia ( W ) 220.00
  • Un eje ( mm ) 2.00
  • B Longitud ( mm ) 38.00
  • C Diámetro ( mm ) 22.00
  • Puede longitud D ( mm ) 36.00
  • Longitud Total E ( mm ) 49.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Slapped one of these into a Team Associated RC18T and a Team Losi Mini T. Great power and coupled with the programming card this makes a great setup.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Slapped one of these into a Team Associated RC18T and a Team Losi Mini T. Great power and coupled with the programming card this makes a great setup.

Installed this onto a HPI rs4 with some slight mods to chassis, absolutely weapon of a vehicle and very impressed overall!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Installed this onto a HPI rs4 with some slight mods to chassis, absolutely weapon of a vehicle and very impressed overall!

Great power system I use in my micro rs4 it's very fast you will need to get 2.5mm bolts for mounting motor and drill the motor mount holes out cause stock bolts are 2mm

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great power system I use in my micro rs4 it's very fast you will need to get 2.5mm bolts for mounting motor and drill the motor mount holes out cause stock bolts are 2mm

I put this in a LaTrax SST 1/18 truck. Unbelievable performance for the money. Suuuuuper fast on a 14t pinion, but gets hot - on a 80F day, motor measured 160F and ESC measured 130F after a 10 minute run. 13t pinion would be better for bashing and not worrying about temps. (or get the lower KV version of the motor) Not quite drop in - you need to provide your own motor mounting screws, and some dremeling is required on the aluminum motor mount (holes on the LaTrax motor mount are a little too far apart and there's a ridge you need to grind down) Don't bother with the programming card, mine runs perfect on stock settings. I'm running a 2000mah 2s receiver pack - PRODUCT ID: 9210000043 - and with a minor dremel mod to the battery tray it's a PERFECT fit. After a 10 minute run each cell still has 4.0 volts. Top notch!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I put this in a LaTrax SST 1/18 truck. Unbelievable performance for the money. Suuuuuper fast on a 14t pinion, but gets hot - on a 80F day, motor measured 160F and ESC measured 130F after a 10 minute run. 13t pinion would be better for bashing and not worrying about temps. (or get the lower KV version of the motor) Not quite drop in - you need to provide your own motor mounting screws, and some dremeling is required on the aluminum motor mount (holes on the LaTrax motor mount are a little too far apart and there's a ridge you need to grind down) Don't bother with the programming card, mine runs perfect on stock settings. I'm running a 2000mah 2s receiver pack - PRODUCT ID: 9210000043 - and with a minor dremel mod to the battery tray it's a PERFECT fit. After a 10 minute run each cell still has 4.0 volts. Top notch!!

excellent combo ,I installed it on my xray m18, and it fits very well and runs excellent

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

excellent combo ,I installed it on my xray m18, and it fits very well and runs excellent

Parfait pour mon CR 1/16

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Parfait pour mon CR 1/16

This esc and motor combo is the exact same as the toro with a different brand name. this motor works great with the Dromida Rc cars by Revell. it is a direct drop in and it is plenty fast. i have yet to experience any issues with it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This esc and motor combo is the exact same as the toro with a different brand name. this motor works great with the Dromida Rc cars by Revell. it is a direct drop in and it is plenty fast. i have yet to experience any issues with it.

I chose this middle power version (TrackStar 1/18th Scale 12T Brushless power System 5050kv) for my RC18T2 build and I would have taken the lower kv one, but it was out of stock. Quality seems great and price is very resonable. Only time will tell how it handles all the torture I'm gonna put it through.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I chose this middle power version (TrackStar 1/18th Scale 12T Brushless power System 5050kv) for my RC18T2 build and I would have taken the lower kv one, but it was out of stock. Quality seems great and price is very resonable. Only time will tell how it handles all the torture I'm gonna put it through.

Took two weeks to get it from Hong Kong to the US, but worth the price and wait. My RC18B2 is way faster and smoother than the factory brushed motor setup.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Took two weeks to get it from Hong Kong to the US, but worth the price and wait. My RC18B2 is way faster and smoother than the factory brushed motor setup.

This combo is perfect for 2s lipo on ftx colt and ripmax jackal 1/18, standard gearing,nice temps, good speeds, easy to install just need to solder your chosen battery connecter, motor runs a little too hot on 3s after a while, would need some kind of heatsink and fan,to be honest the speed from the 3s is too insane, flips from a stand still!good for a few speed runs just moniter temps.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This combo is perfect for 2s lipo on ftx colt and ripmax jackal 1/18, standard gearing,nice temps, good speeds, easy to install just need to solder your chosen battery connecter, motor runs a little too hot on 3s after a while, would need some kind of heatsink and fan,to be honest the speed from the 3s is too insane, flips from a stand still!good for a few speed runs just moniter temps.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save