New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Trainstar Trainer Tough 1400mm (PNF)

Trainstar Trainer Tough 1400mm (PNF)

Shipped From:
  • USA
  • Global
QTY:

Now save guardar 0,00 € 0,00 €

99,18 €
Estado:
En stock
SKU:
043000003
WANT FREE SHIPPING? Click here to find out more!

Buscando un entrenador Plug and Fly que puede recibir una paliza? El Trainstar es el modelo que está buscando!

Este modelo cuenta con un fuselaje moldeado por soplado con capa de refuerzo interno - es difícil! El ala es elástico de espuma EPO con los mástiles internos para una resistencia adicional.

Esta versión es un paquete Plug and Fly que incluye todo el equipamiento necesario para ensamblar el modelo incluyendo servos preinstalados, ESC y outrunner sin escobillas. Se le solicitará su propio sistema de radio 4-6 canales (transmisor y receptor), batería de 1800mAh 3S Lipo y cargador de batería.

Incluso existe la opción de añadir solapas en una etapa posterior si lo desea - también se incluye el hardware para hacerlo, sólo tiene que añadir un adicional de 2 9grams servos.

caracteristicas:
• fuselaje de plástico reforzado con capas
• ala OEP Tough
• servos preinstaladas
controlador electrónico de velocidad • Pre-instalado
• 850Kv Outrunner
• Kit de hardware Integral
• Opción para añadir solapas
• Manual de instrucciones

Especulación:
Envergadura: 1400mm
Longitud: 1060mm
Batería: 1800mAh 3S (11.1V) (requerido)
Motor: 850Kv Outrunner (incluido)
Objeto: 12x6
ESC: 30 amperios (Incluido)
Peso: 1300g

Se requiere:
canal de radio 4-6
batería de 1800mAh 3S Lipo
Cargador de batería

  • SKU (Número de Referencia) 043000003
  • Brand H-King
  • Peso 3201.0000
  • Longitud 885.00
  • Ancho 205.00
  • Altura 255.00
  • IC / 2 : Elec -
  • Motorsize ( diam - o - cc ) -
  • Envergadura ( mm ) 1400.00
  • Length(mm) -
  • SaleWeight ( g ) -
  • Capacidad ( mAh ) -
  • Trainer Star
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

It´s a good plane and I really liked it, but the capacity of the ESC included is not enough for the brushless motor, with made me lose control over an air current and crash it against my car, later I discovered that the propeller speed wasnt enogh to fly when you put the controller at full throttle, it actually did some weird stuff like stopping ramdomly for a fraction of a second while spinning at a lower velocity than it should.
As a recomendation to HobbyKing, I would be willing to pay a comple more bucks to have a ESC of 30A instead of a 20A that will give me issues. Meanwhile it would be a good practice to spend $10 more to replace de ESC with a 30A one, so it will fly flawlesly.

verified_user Quality:
playlist_add_check Overall:
trending_up Value:

It´s a good plane and I really liked it, but the capacity of the ESC included is not enough for the brushless motor, with made me lose control over an air current and crash it against my car, later I discovered that the propeller speed wasnt enogh to fly when you put the controller at full throttle, it actually did some weird stuff like stopping ramdomly for a fraction of a second while spinning at a lower velocity than it should.
As a recomendation to HobbyKing, I would be willing to pay a comple more bucks to have a ESC of 30A instead of a 20A that will give me issues. Meanwhile it would be a good practice to spend $10 more to replace de ESC with a 30A one, so it will fly flawlesly.

I've had this plane for a few weeks now & have flown it 6 times. It is amazing for the price!
The instructions suck, the tailwheel steering is not great & landing a taildragger is not the easiest, but it's a tough plane & is proving great to learn with.
It's my first plane & I'm 6 flights in with no damage or issues.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've had this plane for a few weeks now & have flown it 6 times. It is amazing for the price!
The instructions suck, the tailwheel steering is not great & landing a taildragger is not the easiest, but it's a tough plane & is proving great to learn with.
It's my first plane & I'm 6 flights in with no damage or issues.

Avion trs compliqu a monter, des multiples sachets de vis en tous genres et aucunes reprs ! j'ai commenc par les cornes de derive, ensuite par les roues puis le moteur et maintenant je compte les vis que je met par petits tas, trs mauvaise notice de montage !
tres difficile de s'y retrouver !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Avion trs compliqu a monter, des multiples sachets de vis en tous genres et aucunes reprs ! j'ai commenc par les cornes de derive, ensuite par les roues puis le moteur et maintenant je compte les vis que je met par petits tas, trs mauvaise notice de montage !
tres difficile de s'y retrouver !

Just received plane. Fast delivery. Instructions are very poor. Per usual the parts dont fit exact. Not enough of the proper size screws to assemble. China has a good idea on products, just does not follow thru. Better be an experienced builder to put this together.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received plane. Fast delivery. Instructions are very poor. Per usual the parts dont fit exact. Not enough of the proper size screws to assemble. China has a good idea on products, just does not follow thru. Better be an experienced builder to put this together.

This is a very durable trainer! I have plowed it into the ground several times, flown it thru a tree, which ripped the wings off and it glued back together with Gorrila Glue and still flying, the plastic pieces for the tail (rudder and elevator ) broke so I used 4-40 all thread four washers and four nuts to bolt it back together, its still hanging in there. As you can tell I am a beginner pilot, I have built several planes over the last 40 years none of which ever got flown, I was afraid to crash after all that build work. But that knowledge helps keep this one in the air. So if your just starting out like me and looking for a good trainer, I recommend this one ! It also helps to use flight training software.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a very durable trainer! I have plowed it into the ground several times, flown it thru a tree, which ripped the wings off and it glued back together with Gorrila Glue and still flying, the plastic pieces for the tail (rudder and elevator ) broke so I used 4-40 all thread four washers and four nuts to bolt it back together, its still hanging in there. As you can tell I am a beginner pilot, I have built several planes over the last 40 years none of which ever got flown, I was afraid to crash after all that build work. But that knowledge helps keep this one in the air. So if your just starting out like me and looking for a good trainer, I recommend this one ! It also helps to use flight training software.

A plane really tough! I've got it since i was a beginer and crashed it a maiden; straight into the nose, and no damage at all!!! Ilt still flying for relaxing days and scale fly.
The plane flyes smooth, the aileron are small and just help you to control the rolling and keep straight. There is a better yaw control with the ruder much responsive. The plane is a bit heavy and it need elevator to fly scale. The motor is powerfull, full throtle give a loop. Flaps are effectives but not essentials. i fly with 2200 20c or 2100 35c. good balance and fly time. Be carreful to check the screws, i lost the tailwheel and had to make a new one with the linkage, spareparts are hard to find!
So it's a good trainer that need to control the 3 axis to fly clean. It's too heavy with too small ailerons to be nimble and make aerobatics, but fly scale and is impressive in the air. Some people tought it was a true plane...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A plane really tough! I've got it since i was a beginer and crashed it a maiden; straight into the nose, and no damage at all!!! Ilt still flying for relaxing days and scale fly.
The plane flyes smooth, the aileron are small and just help you to control the rolling and keep straight. There is a better yaw control with the ruder much responsive. The plane is a bit heavy and it need elevator to fly scale. The motor is powerfull, full throtle give a loop. Flaps are effectives but not essentials. i fly with 2200 20c or 2100 35c. good balance and fly time. Be carreful to check the screws, i lost the tailwheel and had to make a new one with the linkage, spareparts are hard to find!
So it's a good trainer that need to control the 3 axis to fly clean. It's too heavy with too small ailerons to be nimble and make aerobatics, but fly scale and is impressive in the air. Some people tought it was a true plane...

Great model very tough had it in a tree once for a few days slight damaged it still flew again good value for the money

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great model very tough had it in a tree once for a few days slight damaged it still flew again good value for the money

plane is ok, no parts support from HK that's why only 4 stars

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

plane is ok, no parts support from HK that's why only 4 stars

Plane arrived in good time. This is a nice looking plane and it does have a photographic flow of the build but there are lots of bags of screws and fittings that do not have labels and a good deal of time is lost "guessing" which screws go where. For example, the tail fin plastic bracket (I guessed) uses two of the long black thin screws, seems to work for me. The rudder control horn requires longer screws than the other control horns, I guessed again, picked out two long self tappers and it seems to work. The ultimate confusion was the screws holding the wing onto the plane...there are four screw holes in the wing connector and three long bolts plus three shorter bolts are supplied! Ok. It doesn't take an engineer to work out the the bracket holding the wing on requires two long at the front and two short boys at the rear but it would have been nice to have these parts labelled and the spare boys only served to confuse the issue. There were two real problems with the plane, the bracket for the motor isn't long enough because the motor shaft struck the plastic bulkhead, I resolved this by adding a couple of washers, secondly, the rudder servo was defective, a little quality control required here HK. I've yet to fly the plane but I believe that it will be fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Plane arrived in good time. This is a nice looking plane and it does have a photographic flow of the build but there are lots of bags of screws and fittings that do not have labels and a good deal of time is lost "guessing" which screws go where. For example, the tail fin plastic bracket (I guessed) uses two of the long black thin screws, seems to work for me. The rudder control horn requires longer screws than the other control horns, I guessed again, picked out two long self tappers and it seems to work. The ultimate confusion was the screws holding the wing onto the plane...there are four screw holes in the wing connector and three long bolts plus three shorter bolts are supplied! Ok. It doesn't take an engineer to work out the the bracket holding the wing on requires two long at the front and two short boys at the rear but it would have been nice to have these parts labelled and the spare boys only served to confuse the issue. There were two real problems with the plane, the bracket for the motor isn't long enough because the motor shaft struck the plastic bulkhead, I resolved this by adding a couple of washers, secondly, the rudder servo was defective, a little quality control required here HK. I've yet to fly the plane but I believe that it will be fine.

A GREAT! beginner plane. I had flown some diffrent planes before this one, but never got the hang of it. This plane tought me what i needed, so now i have gotten enough practise to advance to more difficult planes.



I can really recommend this plane :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A GREAT! beginner plane. I had flown some diffrent planes before this one, but never got the hang of it. This plane tought me what i needed, so now i have gotten enough practise to advance to more difficult planes.



I can really recommend this plane :)

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Customer files
No File Name Download [8]
No File Name Download [100]
No File Name Download [8]
No File Name Download [58]
No File Name Download [10]
No File Name Download [10]
No File Name Download [8]
No File Name Download [8]
No File Name Download [8]
Parts Download [172]
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save