New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Turnigy 1/16 4WD Nitro-T Truggy w / .07 Engine (ARR)

Turnigy 1/16 4WD Nitro-T Truggy w / .07 Engine (ARR)

Discontinued Product

Please continue searching for a similar product.
SKU:
9249000908-0
WANT FREE SHIPPING? Click here to find out more!

No permita que es tonto pequeño tamaño. El 1/16 de Turnigy Nitro-T Truggy es un corredor poco serio!

Hemos empezado con una plataforma con errores, reforzado hasta que, añadido más grandes ruedas / neumáticos por lo que es aún mejor con un motor .07! El 4WD Turnigy 1/16 Nitro-T Truggy ahora ofrece más potencia y una velocidad máxima más alta, justo lo que necesita para satisfacer su apetito de poder de hambre!

A partir de un japonés hizo tirar de arrancar el motor nitro .07 ci, tubo de sintonía, árbol conducido tracción en las cuatro ruedas - con ejes del apoyo de acero y frenos de disco, este pequeño cochecito cumple todos los requisitos. Tiene una gran gama de ajuste de la caja, tales como: regulación de los brazos superiores de control, la posición de choque, choque de precarga trasera, centro de balanceo, suspensión topes regulables hacia abajo y delante / barras estabilizadoras traseras.

Una mirada rápida sobre las imágenes demostrará la durabilidad incorporada y componentes de ingeniería sobre-como los brazos de suspensión, amortiguadores y los mamparos. Está construido más como un piloto de escala 1/10 de un 1 / 16o!

Este Turnigy Nitro-T Truggy llega como ARR versión, completamente integrado con la alta dirección y los servos par acelerador instalados y todos los vínculos pre-ajustada. Sólo tiene que añadir su receptor, 4 baterías AAA, combustible, un conductor de la bujía incandescente y su listo para el rock!

caracteristicas:
• Casi listo para ejecutarse - Caída de su sistema de radio, la batería y la unidad!
• Diseño de cuatro ruedas con unidades diferenciales delantero y trasero
• barras estabilizadoras delantera y trasera ajustable y
• protector integrado servo de dirección ajustable
• Placa de chasis de aluminio
• Motor de gran alcance con el tamaño de 0.07 cuerda de arranque, sin caja de arranque pesado necesario
• A todo color carrocería plástica
• Neumáticos de tacos estilo truggy grande

Especificaciones:
Ancho: 228 mm
Altura: 128 mm
Pista: 228mm
Longitud: 310MM
Distancia entre ejes: 195MM
Relación de transmisión: 11.46: 1
Motor:. 07 ci
Distancia al suelo (F / R): 25-30mm
Servos: Dirección 16g, 9 g del acelerador
Unidad: Tiempo completo 4WD, Doble Dif

Necesario:
2 Canal de radio (TX / RX)
4 pilas AA para el receptor
combustible nitro
conductor de la bujía incandescente
La puesta en marcha kit

* Nota: Piezas y partes de opciones están listas !!

  • SKU (Número de Referencia) 9249000908-0
  • Brand Turnigy
  • Capacidad ( mAh ) -
  • Peso 1590.0000
  • Longitud 320.00
  • Packaging Width 160.00
  • Altura 240.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Wow what a great little truggy! Only run two tanks of fuel through so far but crikey what a ripper set up. Might not be well suited to proper racing, but for ripping up your local park or front yard with a mini screamin machine, you cant go wrong. I got it on sale of course, so great value for the money in my case. Maybe not worth full whack, so I reckon wait for a special if your coin is tight.
Pros
looks great, pretty quick full tilt, easy to tune and of course, Cheap fun!
Cons
not super strong and as it is quite quick, light and nimble, its enough to have some fairly decent stacks over pretty tame grounds. Receiver space is on the tight size too, even for a micro receiver.
No one way bearing problems on this one, its easy to start and with some minor tuning, it's running spot on. Fuel tank is on the small side, but ths just makes for regular well timed pitstops for a bevvie!
9/10 for fun times

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wow what a great little truggy! Only run two tanks of fuel through so far but crikey what a ripper set up. Might not be well suited to proper racing, but for ripping up your local park or front yard with a mini screamin machine, you cant go wrong. I got it on sale of course, so great value for the money in my case. Maybe not worth full whack, so I reckon wait for a special if your coin is tight.
Pros
looks great, pretty quick full tilt, easy to tune and of course, Cheap fun!
Cons
not super strong and as it is quite quick, light and nimble, its enough to have some fairly decent stacks over pretty tame grounds. Receiver space is on the tight size too, even for a micro receiver.
No one way bearing problems on this one, its easy to start and with some minor tuning, it's running spot on. Fuel tank is on the small side, but ths just makes for regular well timed pitstops for a bevvie!
9/10 for fun times

Can't give it 5 star just yet, but for the price, it's a great little car. Servo settings seem just right out of the box, started right up and idled within the 3rd pull of the starter, ran 3 tanks idling without a hiccup.
Only 2 thing I wish, 1 I wish it had a 2 speed gear box (which is available aftermarket) and 2 it needs a larger fuel tank, only about 8-10 minutes idling emptied the tank

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Can't give it 5 star just yet, but for the price, it's a great little car. Servo settings seem just right out of the box, started right up and idled within the 3rd pull of the starter, ran 3 tanks idling without a hiccup.
Only 2 thing I wish, 1 I wish it had a 2 speed gear box (which is available aftermarket) and 2 it needs a larger fuel tank, only about 8-10 minutes idling emptied the tank

Update. Had steering servo strip gears and fail. Installed a Hitec metal geared servo and it has worked out great. Been beating this thing up at the local coarse for over a month now and it has performed great. Love running this truggy. Had its teething problems but once solved this truggy has been rock solid. Fun little machine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Update. Had steering servo strip gears and fail. Installed a Hitec metal geared servo and it has worked out great. Been beating this thing up at the local coarse for over a month now and it has performed great. Love running this truggy. Had its teething problems but once solved this truggy has been rock solid. Fun little machine.

Very fun 1/16th truggy! Running this will put a smile on your face. I would not recommend this to a first timer due to the following problems I had. First, the clutch springs broke during break in. Have new springs coming from International WH but could not wait so I fabricated springs out of .80mm piano wire. They work great with several runs w/o a problem. Second, the one way bearing on pull starter failed,(after many, many, many pulls) but I managed to find new bearings online. Again, could not wait, so fixed bearing and got truggy back up and going. Have several runs with the fixes I made and truggy runs very well. Worth the $100 price. Easy to work on. Would buy again

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very fun 1/16th truggy! Running this will put a smile on your face. I would not recommend this to a first timer due to the following problems I had. First, the clutch springs broke during break in. Have new springs coming from International WH but could not wait so I fabricated springs out of .80mm piano wire. They work great with several runs w/o a problem. Second, the one way bearing on pull starter failed,(after many, many, many pulls) but I managed to find new bearings online. Again, could not wait, so fixed bearing and got truggy back up and going. Have several runs with the fixes I made and truggy runs very well. Worth the $100 price. Easy to work on. Would buy again

Don't bother with this.The buggy itself seems good but the engine is full of problems.
Hard to start and the pullstarter mechanism is of poor quality.There is a one way bearing that will pack up after just a few starts.I bought 4 of them as Christmas presents and now I have 4 useless buggys sitting on the workbench.Is my own fault/should have done a bit more research before purchasing.The one way bearing is available to buy(when in stock) but I quess it will pack up again.something to do with the pullstarter shaft not sitting straight when engaging the bearing.u are warned!!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Don't bother with this.The buggy itself seems good but the engine is full of problems.
Hard to start and the pullstarter mechanism is of poor quality.There is a one way bearing that will pack up after just a few starts.I bought 4 of them as Christmas presents and now I have 4 useless buggys sitting on the workbench.Is my own fault/should have done a bit more research before purchasing.The one way bearing is available to buy(when in stock) but I quess it will pack up again.something to do with the pullstarter shaft not sitting straight when engaging the bearing.u are warned!!!!

Customer files
The world's only 2 speed, dual brake Nit Download [334]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save