New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Turnigy 1/16 4WD Nitro-T Truggy w / .07 Engine (RTR)

Turnigy 1/16 4WD Nitro-T Truggy w / .07 Engine (RTR)

Discontinued Product

Please continue searching for a similar product.
SKU:
9249001140-0
WANT FREE SHIPPING? Click here to find out more!

No permita que es tonto pequeño tamaño. El 1/16 de Turnigy Nitro-T Truggy es un corredor poco serio!

Hemos empezado con una plataforma con errores, reforzado hasta que, añadido más grandes ruedas / neumáticos por lo que es aún mejor con un motor .07! El 4WD Turnigy 1/16 Nitro-T Truggy ahora ofrece más potencia y una velocidad máxima más alta, justo lo que necesita para satisfacer su apetito de poder de hambre!

A partir de un japonés hizo tirar de arrancar el motor nitro .07 ci, tubo de sintonía, árbol conducido tracción en las cuatro ruedas - con ejes del apoyo de acero y frenos de disco, este pequeño cochecito cumple todos los requisitos. Tiene una gran gama de ajuste de la caja, tales como: regulación de los brazos superiores de control, la posición de choque, choque de precarga trasera, centro de balanceo, suspensión topes regulables hacia abajo y delante / barras estabilizadoras traseras.

Una mirada rápida sobre las imágenes demostrará la durabilidad incorporada y componentes de ingeniería sobre-como los brazos de suspensión, amortiguadores y los mamparos. Está construido más como un piloto de escala 1/10 de un 1 / 16o!

Este Turnigy Nitro-T Truggy llega una versión RTR, totalmente construida con la alta dirección y los servos par acelerador instalados y todos los vínculos pre-ajustada. Sólo tiene que añadir 4 pilas AAA, combustible, un conductor de la bujía incandescente y su listo para el rock!

caracteristicas:
• listo para ejecutarse - Disminución de la batería, combustible y conducir!
• Diseño de cuatro ruedas con unidades diferenciales delantero y trasero
• barras estabilizadoras delantera y trasera ajustable y
• protector integrado servo de dirección ajustable
• Placa de chasis de aluminio
• Motor de gran alcance con el tamaño de 0.07 cuerda de arranque, sin caja de arranque pesado necesario
• A todo color carrocería plástica
• Neumáticos de tacos estilo truggy grande

Especificaciones:
Ancho: 228 mm
Altura: 128 mm
Pista: 228mm
Longitud: 310MM
Distancia entre ejes: 195MM
Relación de transmisión: 11.46: 1
Motor:. 07 ci
Distancia al suelo (F / R): 25 ~ 30MM
Servos: Dirección 16g, 9 g del acelerador
Unidad: Tiempo completo 4WD, Doble Dif

Necesario:
4 pilas AA para el receptor
combustible nitro
conductor de la bujía incandescente
La puesta en marcha kit

* Nota: Piezas y partes de opciones están listas !!

  • SKU (Número de Referencia) 9249001140-0
  • Brand Turnigy
  • Capacidad ( mAh ) -
  • Peso 1600.0000
  • Longitud 320.00
  • Packaging Width 160.00
  • Altura 240.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Fun truck, I got on sale for 90 USD, and it starts and runs when i want it to. Nothing special, but for a cheap RTR I did think i would get something that ran.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fun truck, I got on sale for 90 USD, and it starts and runs when i want it to. Nothing special, but for a cheap RTR I did think i would get something that ran.

Small little nitro car! Is fun to ride.

But you need to know a few things about RC-Cars to keep it running. Due to the small size it's tricky repair or change parts!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Small little nitro car! Is fun to ride.

But you need to know a few things about RC-Cars to keep it running. Due to the small size it's tricky repair or change parts!!

If you're new to RC Nitro cars and just want to fuel and bash then move along as this car is definitely not RTR.

As mentioned on the international HK website the pull start starts slipping after a few pulls, but can be fixed by sealing the OWB using heat resistant silicone and replace the brass bushing inside the backplate with two bearings.
Once this is done the engine will start flawlessly every time but if you modify or clean the engine and take it out for repairs you will notice the exhaust gasket will tear over time if removed and it's not available as a replacement part.
The pinions on the diffs strip as soon as you start taking the car for a bashing session but they can be replaced easily and are fairly cheap.

It may sound a little odd but even though this car has some issues I love it since it keeps me busy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

If you're new to RC Nitro cars and just want to fuel and bash then move along as this car is definitely not RTR.

As mentioned on the international HK website the pull start starts slipping after a few pulls, but can be fixed by sealing the OWB using heat resistant silicone and replace the brass bushing inside the backplate with two bearings.
Once this is done the engine will start flawlessly every time but if you modify or clean the engine and take it out for repairs you will notice the exhaust gasket will tear over time if removed and it's not available as a replacement part.
The pinions on the diffs strip as soon as you start taking the car for a bashing session but they can be replaced easily and are fairly cheap.

It may sound a little odd but even though this car has some issues I love it since it keeps me busy.

Bought two of these cars during the summer sales. They are pretty good except for a few rather serious issues. Definitely not beginner / "serious driver" friendly at all.
1. The springs on the clutches available from HK break all the time on one of the cars, 7/8 times of driving... pretty bad and tedious. Definitely replace them with proper ones as suggested by others suffering from the same issue.
2. One way bearings started slipping badly on both cars very soon after break-in. Had to order proper ones from ebay.
3. The metal drive gears broke down on both front and rear differentials simultaneously on one of the cars.
4. The air filter foams are very badly cut out, pinched from the sides and too small for the housing. One of the engines got filled with sand the first time driving after break-in, even with proper air filter oiling.

Other than that, the motor is pretty nice for the price and the car is fun to drive, when everything is working...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought two of these cars during the summer sales. They are pretty good except for a few rather serious issues. Definitely not beginner / "serious driver" friendly at all.
1. The springs on the clutches available from HK break all the time on one of the cars, 7/8 times of driving... pretty bad and tedious. Definitely replace them with proper ones as suggested by others suffering from the same issue.
2. One way bearings started slipping badly on both cars very soon after break-in. Had to order proper ones from ebay.
3. The metal drive gears broke down on both front and rear differentials simultaneously on one of the cars.
4. The air filter foams are very badly cut out, pinched from the sides and too small for the housing. One of the engines got filled with sand the first time driving after break-in, even with proper air filter oiling.

Other than that, the motor is pretty nice for the price and the car is fun to drive, when everything is working...

clutch springs quickly broken, except her beautiful.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

clutch springs quickly broken, except her beautiful.

Upon receiving and unpacking the only complaint I have about this truggy was the one of the shocks was not sealed tight all the way, therefore the shock was empty, tightened it up, filled it up, all set. All the screws were securely tightened, clutch bell to spur gear mesh was perfect, differentials had a decent amount of grease, although i added a little more. Very similar nitro buggy (own both), but like they say everything is beefed up, larger dogbones, wider stance, longer wheel base, no plastic mud guards, their integrated in the chassis plate! Very satisified for the price! Cant beat DHL shipping speed for the price! Thanks Hobbyking!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Upon receiving and unpacking the only complaint I have about this truggy was the one of the shocks was not sealed tight all the way, therefore the shock was empty, tightened it up, filled it up, all set. All the screws were securely tightened, clutch bell to spur gear mesh was perfect, differentials had a decent amount of grease, although i added a little more. Very similar nitro buggy (own both), but like they say everything is beefed up, larger dogbones, wider stance, longer wheel base, no plastic mud guards, their integrated in the chassis plate! Very satisified for the price! Cant beat DHL shipping speed for the price! Thanks Hobbyking!

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save