Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Turnigy de 100 grados de rotación de la torcedura n Turn retracción de 2.5m / Warbirds 15Kg

Generating Links

Turnigy de 100 grados de rotación de la torcedura n Turn retracción de 2.5m / Warbirds 15Kg

Precio:

Now save ahorra 0,00 € 0,00 €

110,78 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9107000340-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

retrae Turnigy están hechos de CNC piezas de aleación de metal y los componentes de la más alta calidad. Este giro retráctil excelente servoless y girar juego de engranajes principal es una necesidad para su escala del modelo pájaro de guerra tales como el Hellcat, Corsair o P-40 en los 2,5 millones de unidades size.These se suministran como principal mecanismo de retracción fijado solamente, que le permite elegir exactamente qué estilo pata de tren que necesita. Diseñado para las piernas de engranajes con un tamaño de pasador de 8 mm.

Especificaciones:

Engranaje de la pierna Diámetro del eje: Φ8mm
Velocidad: 6 V: 6 segundos / 100 grados, 7.4V: 5 segundos / 100 grados
Par: 6V: 16 kg-cm, 7,4 V: 18 kg-cm
Amperios: 6V: sin carga: 200 mA con carga: 250mA
7.4V: sin carga: 220mA con carga: 280mA
Peso: 163 g cada una
Tamaño de base: 86x28x35.5mm
Patrón del tornillo: 44x25mm

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Acesimmer | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 15, 2016

I just installed a set of these in my 78" scratch built A6 Intruder. From the outside the quality looks very good and seem very solid. However, after doing a few test cycles so that I could set the strut angle one gear just locked up half way with a stripped gear. Tried to get HK to replace under warranty and they sent me a cheap set which are not the same. So I had to open up and see what I could find wrong.

The quality of the case and internal metal parts are very good and strong. The screw drive gear box is very weak and not up to the rest of the product. If Turing would install a stronger gear box these retracts would sell like hot cakes. Unfortunately I have a contest in two weeks so could not send the damaged one back so I'm screwed for a replacement. 2 out of ten but with a stronger gear box would have been 9 out of ten.

Balsa Bits | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jan 21, 2015

not very good at all, if you tighten the bolt on the tall bracket the retracts bind, bad geometry design, the grub screw on the holding bracket was stripped and theres not enough material to tap it out, very weak, retracts seem ok but the twist and turn is very poor, was going to use them on my esm p40 but will stick with original air retracts, cannot recommend these at all. just like my ca 80 motor from hk, rubbish.

nihil | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 10, 2014

Usualy my orders take 3 month to be delivered but my retracts were delivered 112 h 20 min after my order click. THANKS DHL. - I live in Brasil.

nihil | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 10, 2014

I should not have rated it 5 crowns, but... CHECK BEFORE TESTING: They have 12 socket head bolts, two were tightened, 8 were loose and 4 I found inside the box. Dont through away the box before checking the bolts. THEY ARE NOT 100 DEGREE ROTATING, MINE ARE ONLY 94 ( NINETY FOUR DEGREE ONLY ). By fortune 94 in both retracts.

Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!