- Descripción
del -
Dimensiones: 35 mm x 38 mm, 53 mm (con eje)
Peso: 97 g (kv1500) (sin incluir conectores)
Diámetro del eje: 4 mm
Longitud del eje delantero: 18 mm
Espesor de la laminación:. 2mm
Tipo de imán: 45SH
el rendimiento máximo
Voltaje: 3SCorriente máxima: 40A / 20SObjeto: 10x5Tirón: 1850gPara 1400-1800g avión 3D.
Descargar archivos de datos:
TURNIGY MOTOR DE DATOS - Product
Specifications -
Información adicional
-
SKU (Número de Referencia):
T3632-1500
-
Brand:
No
-
Peso ( g)
165.00
-
Longitud
89.00
-
Ancho:
46.00
-
Altura:
51.00
-
Kv (rpm / v)
1500.00
-
Corrientes max (A)
40.00
-
Potencia ( W ):
0.00
-
B Longitud ( mm ):
35.00
-
Puede longitud D ( mm )
14.00
-
Max Voltaje ( V )
11.00
-
Un eje ( mm ):
4.00
-
Unit Weight (g):
97
-
C Diámetro ( mm )
37.00
-
Longitud Total E ( mm )
53.00
-
Resistencia ( MH ):
0.00
-
SKU (Número de Referencia):
- Community
Discussions -
- Rate&
Review -
Excelente motor, num avio de 1k e uma hlice 9x6 sobe na vertical como um mssil :-)Bin sehr zufrieden mit dem Motor. Betreibe ihn in meinem Typhoon 2 3D von Parkzone. Luft super und leise. Perfekte Leistung fr meinen Flieger mit einer 10*5 Luftschraube. Kann ich nur weiterempfehlen!!!Muito bom o motor!! Uso em um tucano 100cm fica uma bala com hlice 9x7 APC. Esc de 45A e bat 2.2. O aero sobe na vertical!j'utilise se moteur sur une z aile 140 ,d'un poid de 1250gr avec une helice 10x5 et un contro de 40A ,l'accu est un rhino 3s 2350mah.je monte a la verticale sans aucun probleme ,j'ai environ 15min d'autonomie et le moteur ne chauffe presque pas meme a fond pendant un bon moment.trs bon moteurVery powerfoul Motor. About 1,9 KG thrust with 11x6 prop on 3s 2200 mAhI bought this motor but I am not satisfied with it.
I used t with 2200 mAh 3S 40c Batt, 45 A Turnigy thrust ESC,
8x6 apc or 8x6 sf propellers; after half thrust kv drops, it works efficiently only with 7x5 propellers.
I checked the motor, workmanship is also very bad.I put this in my scratch buiilt plane (AUW- 1200g), 1.1m wing span. Nice vertical (altho not unlimited) with 10X5prop, 3 cell 2200mah lipo and a 50A esc. I had over 30 flight now with one (lucky) crash..but still no issue. Very nice motor.havent flown with it yet, but here are some test results(i can only measure the current till 20Amps:(, i used a 3s nano-tech, the voltage was 11.25V):
prop: pull at 20Amps maximum pull
9x7, 3 blade: 900g 1400g
10x6, folding: 1050g 1750g!!!
8x6 sport: 625g 952g
8x8 composite: 705g 910g
AWESOME MOTOR, and cheap, 5 crowns.Great motor! I put one in my Tower Hobbies Select Scale Cessna 182 along with a 9x6x3 M.A. prop and made it a fun plane to fly. Very good speed and power. I'm planning of putting one in my P-51 next to wake it up.I bought this engine which Multiplex Funcub 1050 grams, 10 x 6 propeller, Turnigy 40 amp plus control, very high performance, there are floats, 60-gram camera. No problem for him. Thanks for a great product HK. - Upload
Videos - Upload
Files -
Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!
Customer filesTGY motors download now [2330kb]
