TURNIGY 5-7.5A (8 ~ 42v) HV UBEC para Lipoly

• Overall
• Quality
• Value

very very good

Apr 18, 2018

i have 2 of them in boat.

• Overall
• Quality
• Value

Customer Rated

Aug 22, 2016

This UBEC is excellent for ground operations.. Low noise at 3 - 4 amps. The more amps you draw the more noisier it gets.
If you wanna use it on a multicoper dont buy this , Search Matek or diatone, they are better.

• Overall
• Quality
• Value

Customer Rated

Jun 28, 2016

Worked great on the bench driving servos and RX off a 3S pack, but as soon as I plugged it in to a 6S it gave no output and just heated up. I have had good look with the lower rated Turnigy UBECs in the past, but this one seems to have some issues - will try and get a refund on it.

• Overall
• Quality
• Value

Customer Rated

May 03, 2016

I have used this UBEC on my HK 600GT with Align FBL head, 3GX 6S setup since 2013.
I has worked great for me and has never failed. In 9/6/13 comments I had blame the UBEC for one failure with it but later determined that the crash was cause by a loose battery solder joint which I did poorly. Yesterday I tried this BEC on my Assault 700 with 12S (50v) setup and it worked perfectly without any overheating ( metal case ). I will keep using and monitoring it since the specs say 42 volts max. This UBEC is a winner in my book

• Overall
• Quality
• Value

Customer Rated

Oct 11, 2015

Solid ESC if you do not need more than 5A. I use it quite often in small planes and helicopters.

Note that for high peak currents (>5A) output voltage drops significantly, adding a large capacitor to the output helps.

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 21, 2015

Good quality. On/off switch is handy. Very good.

• Overall
• Quality
• Value

Customer Rated

Mar 28, 2015

Very good quality , solid construction . Included is a switch. Easily copes with 8 servos.Currently there are 2 gimbal servos TALON XUAV

• Overall
• Quality
• Value

Customer Rated

Jun 30, 2014

I use it with the Trackstar 200amp 1/5th ESC. If you didn't know the ESC didn't have BEC circuitry, you sure wouldn't be able to tell looking at the truck. Runs 2 high performance servos smoothly. Highly recommend it.

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 27, 2014

I use it in F5B, with 6 servos. I've just cut the switch.

• Overall
• Quality
• Value

Certified Buyer Rated

May 25, 2014

I have not had problems. I have not refused at work. Power quality of the receiver and servo larger models.