New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Turnigy 5A 1S sin escobillas CES

Turnigy 5A 1S sin escobillas CES

Now save guardar 0,00 € 0,00 €

9,26 €
Estado:
Sin existencias!
SKU:
T5A-1S
WANT FREE SHIPPING? Click here to find out more!
Turnigy 5A-1S ESC un controlador de velocidad sin escobillas muy pequeño y ligero que soporta 1S (3.7-4.2v) lipo celular con una función de 0.5A / 5v de salida BEC. Perfecto para volantes-micro heli y bajo techo.
caracteristicas:
controlado por microprocesador
Resistencia extremadamente baja
3A continua (5A oleada)
1S lipo celular o 3 celdas de NiMH / NiCAD
Alta velocidad de conmutación ajustable (PWM: 8 KHz / 12KHz / 16KHz)
BEC: Max 0.5A (conmutación)
Tensión de corte bajo: 3.0v
tipos de corte programables (corte suave / duro de corte)
Tipo de freno programable (desactivar / suave del freno del freno / disco)
antelación de tiempo programable (bajo / normal / alta)
Limitador de corriente programable (muy SENSIBLES / estándar / insensibles / desactivar)
Programable tipo de inicio (inicio muy suave / arranque / inicio rápido)
Protección térmica (100 grados centígrados)
Aplicar a la mayoría de Inrunner y outrunner motores sin escobillas.
Energía segura en el programa de armado asegura motor no se encienda accidentalmente.
Apagado automático cuando se pierde la señal o interferencia de radio se convierte en grave durante más de 3 segundos .Después de conexión de radio ha sido restablecido, moviendo el acelerador a la posición más baja puede reiniciar el motor.
Nota: programable con tarjeta de monstruo Turnigy programación.
Especulación.
Tensión: 3.0 ~ 4.2V
Cont. Corriente: 3A
Burst actual: 5A
Batería: 1 célula Lipo / 3 células Nixx
BEC: 5V / 0.5A
Tamaño: 25 * 13 * 5 mm
Peso: 2g

Sugerimos a los clientes a no programar salida con su Tx.
  • SKU (Número de Referencia) T5A-1S
  • Brand Turnigy
  • Capacidad ( mAh ) -
  • Peso 25.0000
  • Longitud 100.00
  • Ancho 6.00
  • Altura 80.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I replaced a brushed motor and Esc for one of theses 1s ESC and a 1-2s brussless motor and now the model flys much better and for longer .
Great result.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I replaced a brushed motor and Esc for one of theses 1s ESC and a 1-2s brussless motor and now the model flys much better and for longer .
Great result.

.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

.

Just a heads up, these things are not suitable for multicopters. Far too slow to handle it. They are quite nice though.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just a heads up, these things are not suitable for multicopters. Far too slow to handle it. They are quite nice though.

Great little esc provided you use the sub 2 gram servos so as not to overload the tiny switch mode power supply. I'm running this with an AP03 7500kV motor, 4025 GWS prop, orange Spektrum compatible 4ch receiver and two of the 1.7g linear servos and sub 30g flying weight for vertical performance.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little esc provided you use the sub 2 gram servos so as not to overload the tiny switch mode power supply. I'm running this with an AP03 7500kV motor, 4025 GWS prop, orange Spektrum compatible 4ch receiver and two of the 1.7g linear servos and sub 30g flying weight for vertical performance.

Noticeably more thrust from the AP03 7500 kV motor than I got previously with the XP 3A 1S esc.
It does stutter with the AP03 7500kV motor on startup on the fast start setting and won't start at all on the other two settings unless the prop is given a flip. I haven't experimented yet with the timing mode so see if that helps.
Switch mode esc seems to handle load from orange 2.4 gHz Rx and two 2.5 g sub micro servos without getting hot.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Noticeably more thrust from the AP03 7500 kV motor than I got previously with the XP 3A 1S esc.
It does stutter with the AP03 7500kV motor on startup on the fast start setting and won't start at all on the other two settings unless the prop is given a flip. I haven't experimented yet with the timing mode so see if that helps.
Switch mode esc seems to handle load from orange 2.4 gHz Rx and two 2.5 g sub micro servos without getting hot.

Great esc, bec runs 2 hs55's with no problem. Get the program card as it is hard to hear the motor beeps. Pulling 2 amps in the vid.



http://www.youtube.com/watch?v=K7wIipaCIp0

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great esc, bec runs 2 hs55's with no problem. Get the program card as it is hard to hear the motor beeps. Pulling 2 amps in the vid.



http://www.youtube.com/watch?v=K7wIipaCIp0

This is a great ESC. The best part is that even if you use single cell Lipo, it still puts out 5 volts to your radio. That's right, it has a switching voltage booster for the receiver supply!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a great ESC. The best part is that even if you use single cell Lipo, it still puts out 5 volts to your radio. That's right, it has a switching voltage booster for the receiver supply!!

Very small and light.easy to use.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very small and light.easy to use.

regolatore leggerisimo per micro motori,funzionale ed a baso costo

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

regolatore leggerisimo per micro motori,funzionale ed a baso costo

Customer files
photo instructions Download [3603]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!