Turnigy 90 grados Todo sistema de seguridad retráctil de metal triciclo w / Piernas de alambre de 3 mm (2kg AUW Max)

• Overall
• Quality
• Value

defective gears

Jan 07, 2019

recieved gear and all gear cycled 1st time and the nose and 1 main stopped all together. contacted customer support team. let me say that the support team members that assisted me were the greatest!!!!! 10 STARS. sent in a short video of gear operations and they quickly sent a new set of gear. this set came from global warehouse. unfortunately there was more defective gear in this set. was not able to combine the 2 sets to make 1 complete set, both sets have inoperal nose gears. Small electronics can be very sensative to the elements.I elected to just go with the less expensive gears and all is fine. Once Again! The customer support team is OUTSTANDING. Thank You!!

• Overall
• Quality
• Value

retracts system

Sep 19, 2017

just recieved this item and tested them , nose wheel started to work and stopped half way the other 2 worked O K , will try again later hopefully it is just a cut out in the motor .

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 13, 2015

Simply fantastic!

Very slow retracts, like real jets!

Very strong!

Only 140 grams all together with wires and all!

A must for a true scale builder!

• Overall
• Quality
• Value

Customer Rated

May 19, 2015

Legs are a little under 2.5mm thick, not 3mm as quoted. They work fine, taking a gentle 4 or 5 seconds to go from one motion to another and the anti jamming cut off works well. The mechanism is very long though (which gave me a problem) and after a few retract sequences it all gets quite sloppy, allowing the wheels to rattle up and down about 1/4" (6mm) or so when retracted. Couldn't get the steering to work withut ripping the steering servo out so I just fixed the nosewheel dead ahead by tightening the grub screw.

• Overall
• Quality
• Value

Customer Rated

Apr 16, 2015

Great working retracts, especially for the price. Also love how they retract nice and slow for realism.

• Overall
• Quality
• Value

Customer Rated

Sep 29, 2014

Retracts are good with small shaking only, includes end switches so after movement it turns off the motor current, in case of overcurrent (mechanical issue) it stops motor after several seconds. Mounting is ok.
The bad side os story is that the front wheel steering in not mechanically ok, need complete rebuild of steering lever to opposite direction as it is now. Not easy but feasible.

• Overall
• Quality
• Value

Customer Rated

Jul 19, 2013

Ordered these to put retracts in my GWS A4 EDF.
They seem pretty reasonable, and operate quite well (fairly slow).

The main wheel struts are simply held in via a grubscrew, which means the wheel legs etc can be easily replaced if the get damaged.
The steerable nose wheel has a C-clip on the end of the wire leg, to prevent it falling down. This makes it somewhat harder to replace.

The other thing that people need to be aware of is that the steering 'system' requires the nose wheel to fold up towards the servo. As my A4 will have the servo behind the retract I'll have to look at inventing something to handle it.

And what is it with the Chinese and screws?? All of the screws on the units were loose.
I suspect it'd be just slightly annoying to have them vibrate apart in flight. Check them and tighten them before use, guys!