Turnigy AE-100A sin escobillas CES

• Overall
• Quality
• Value

Prima ESC

Oct 28, 2017

This ESC works very wel.
Easy to program with the 2 in 1 program box.
I use this ecs in combinatie with a Turnigy SK 5065 380 kv motor 1800 watt.
With old Turnigy Plush I had a problem with starting the motor on a very low throttle.
This ESC resolve my problem.
100 Amp is overkill But I do not like hot ESCs

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 12, 2016

Tried this on my motorized longboard project. It has the juice to go fairly fast with 6S and a 195kv motor. However, this doesn't have reverse, and the brakes are non-proportional, so you get an all or nothing braking experience. That may be good for cars, but it will throw you off your board. I just ordered another ESC to try (TrackStar GenII 120A red heatsink without the fan) to try to get a smoother braking feel plus reversing.

• Overall
• Quality
• Value

Customer Rated

Jan 30, 2015

Super regler, etwas berdimensioniert whlen und prog.karte gleich mit bestellen...
Ideal fr jegliche flchen flieger..

• Overall
• Quality
• Value

Customer Rated

Sep 14, 2014

MY review for Turnigy Aerodrive SK3 - 5055-430kv Brushless Outrunner Motor.. I use it for my Sbach Wind S 110E with Turnigy AE-100A Brushless ESC, 6S1P Tiger, 17x10 TGS prop. Very nice motor and more power to climb up the sky. After two flights I am impressed with this brushless cause still cool except Turnigy AE-100A Brushless ESC got a little hotter. Very value motor!
Yes a little hotter after two flights but still nice ESC.

• Overall
• Quality
• Value

Customer Rated

Jan 04, 2014

Great
Simple Programming without Prog-Card.
Using this in my Funjet Ultra with 6s setup and more than 90Amps
stays quite cool ...

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 15, 2013

Turnigy AE-100A Brushless ESC

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 13, 2013

Good quality ESC. I have an AE-80 too, both perform briliantly

• Overall
• Quality
• Value

Customer Rated

Jan 07, 2013

update to my prior comment - Ul 1 boat 3 blade 40mm prop, Turnigy 500 1300kv outrunner, 5s-6s zippy flight max,at 6s 3 x 2s zippy 2200mah 40c in series charged at 8.4v ran great low heat no battery swelling, this esc can handle 6s my charger will 8.4v charge, great so far for boats. thanks "D"

• Overall
• Quality
• Value

Customer Rated

Dec 16, 2012

I tested in a UL 1 with Turnigy 500 1300kv outrunner, Zippy 2200 mah 3s, 2x 2s with the 40mm 3 blade prop at full throttle, esc very very low heat, low battery heat=about 1/4 of what I have felt before - no swelling,very smooth start up, I have had problems with this set up before, very happy so far with esc

• Overall
• Quality
• Value

Customer Rated

Dec 04, 2012

I am using this for a 50-65 410kv motor, 16x10 turnigy wood prop, 6s 4000mah turnigy nano tech batt. 1680watt, 74amp at full 25v freshly charged. 1400watt 62amp at normal 22v operation. have only a few min ground test with meter, and (2) 6min flights on it but so far I am very pleased, everything comes down cool. Very nice case/heat-sink construction. I left all factory settings and works good for my setup, program sheet did come with it.
I would buy again and recommend.