Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Turnigy Aerodrive SK3 - 2122-1570kv sin escobillas del motor Outrunner

Generating Links

Turnigy Aerodrive SK3 - 2122-1570kv sin escobillas del motor Outrunner

Precio:

Now save ahorra 0,00 € 0,00 €

15,33 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
SK3-2122-1570
¿Envío gratis? ¡Haga clic aquí! aprender más!

Turnigy SK3 Motors son el siguiente salto de calidad y diseño del motor. Nos instruyó a los ingenieros a la fuente de la mejor calidad de los imanes, los cojinetes y los materiales disponibles para ellos y desarrollar un motor que no sólo rival, pero superar la calidad de muchos de motor principales fabricantes en el mercado hoy en día.

El resultado es un eficiente y de alta calidad de motor calibre usando cojinetes blindados dobles, imanes de neodimio sinterizado y un estator herida cadena asegurar una precisa y consistente cada devanado y cada vez.

Los motores Turnigy SK3 se adaptan a los modeladores que buscan un motor sin escobillas calidad sin compromiso.

Especificaciones.
Activa: 8T
Voltaje: 2 ~ 3S Lipo
RPM / V: 1 570 kv
La resistencia interna: 0,14 Ohm
Max Carga: 6A
Potencia máxima: 51W
Diámetro del eje: 2,0 mm
Peso: 25 g
Motor de clavija: Conector de 2 mm de bala

  • Kv (rpm / v) 1570.00
  • Corrientes max (A) 6.00
  • Resistencia ( MH ) 140.00
  • Max Voltaje ( V ) 11.00
  • Potencia ( W ) 51.00
  • Un eje ( mm ) 2.00
  • B Longitud ( mm ) 24.00
  • C Diámetro ( mm ) 21.00
  • Puede longitud D ( mm ) 22.00
  • Longitud Total E ( mm ) 29.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Steed | Comprador verificado

  • Overall
  • Value
  • Quality

Ok

Jul 02, 2019

good except missing prop shaft or proper mount. only rubber band / safe prop mount provided... not good if that is not what is required... no other option as usually provided with all other motos

Uli | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Nov 03, 2014

I use this Motor to power my Mini FPV Skywalker (335g). I use a 6x4 Prop, a 3S1000mAh Battery and a 10A ESC. 30pcnt throttle is enough for floating around. Flight time is about 20min with more than 20pcnt left in the Battery. 100pcnt throttle and my Skywalker goes endles straight vertical. On the ground 100pcnt throttle is about 9A of current draw (as fas as I remember). GREAT MOTOR!!

Markox | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Nov 12, 2013

Good buy for the price. Running 2 cell 25-50c 950mah NanoTech Lipo, APC 8 x 3.8 prop 10amp turnigy plush speedy gives 12.04 amps at 92.8watts, perfectly matching the much more expensive Hacker A10-9L. Will 3D a 280gram model OK.
Only Con. Not enough room around screws to place the 0-ring. I did strip the motor and dremel out the frame slightly to clear the o-ring, Now works a treat.

alexklimov | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Nov 23, 2012

With APC 8 x 3.8 SF and fully charged 2s lipo a have got 11.2. After 10 second motor is little worm.

mike_o | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Aug 16, 2012

Nice motor, but with a problem. I bought two of these for a "EasyTwin" mod. Motor draws 5A at 8V (40W) driving a 6"x4" APC prop static. 5-6A at 11.1V (3S) seems plausible in dynamic conditions. B U T, the screws to hold the prop O-ring are seated so closely to the motor bell cut-out, that you can not fit the O-ring. You have to take out the screws (lock-tite = difficult) and re-fit them inside the O-ring. Not an easy feat given the size of the motor. Check out the photo to see what I mean. Longer screws will on hel a little. Apart from that, a very nice little motor.

| Comprador verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

May 12, 2012

motor forte e pequeno ideal para parkflyer e 3d feito em depron.

sokalowy | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Dec 30, 2011

Very nice motors. Great package :) I use them in my Micro Quad by JR65 (25cm - longest (diagonal) distance between motors). Ideal for 5" or 6" props. Distance between screw mounts is 14mm. No female connectors (not needed in my case, I soldered it directly to ESC).

GGrant | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Oct 23, 2011

Looks good. Spins well. Comes with 3 male 2 mm connectors, but they don't include the 3 females! Then the instructions say to be sure not to modify the wiring! So now I wait for some 2 mm female connectors! Should be included with the motor. My LHS doesn't sell that size. Now it will be a month before I can comment on the quality.

ahmad | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Oct 05, 2011

i only say about this motor is WOWW.... this have the same design as hacker a10 series. this turnigy sk3 is a real deal best looking motor for foamies have same power and punch like hacker a10 9l magnet are superb and quality is superb iam using it with 2s 460 nanotech with 12amp plush esc it pull the plane to ultimate limit my model weight 170 grams with battery highly recommended !!!!! if u can then grab 2 atleast!!!

Archivos de clientes
Drawing Download [58]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!