Registrarse

Product Finder

Configuración

Useful links

 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • Global
  • USA

Turnigy Aerodrive SK3 - 6374-149kv sin escobillas del motor Outrunner

Turnigy Aerodrive SK3 - 6374-149kv sin escobillas del motor Outrunner

QTY:

Now save guardar 0,00 € 0,00 €

68,16 €
Stock:
Peso:
1265 g
SKU:
SK3-6374-149

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descripción
del

Turnigy SK3 Motors son el siguiente salto de calidad y diseño del motor. Nos instruyó a los ingenieros a la fuente de la mejor calidad de los imanes, los cojinetes y los materiales disponibles para ellos y desarrollar un motor que no sólo rival, pero superar la calidad de muchos de motor principales fabricantes en el mercado hoy en día. El resultado es un eficiente y de alta calidad de motor calibre usando cojinetes blindados dobles, imanes de neodimio sinterizado y un estator herida cadena asegurar una precisa y consistente cada devanado y cada vez. Los motores Turnigy SK3 se adaptan a los modeladores que buscan un motor sin escobillas calidad sin compromiso. Specs.Turns: 18TVoltage: 12S LipolyRPM / V: resistencia 149kvInternal: 0,021 OhmMax Carga: 70AMax Potencia: 2250WShaft Dia: agujeros 8.0mmBolt: hilo 32mmBolt: M4Weight: 840gMotor enchufe: 4,0 mm conector de bala

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    SK3-6374-149
  • Brand:
    Turnigy
  • Peso ( g)
    1265.00
  • Longitud
    175.00
  • Ancho:
    70.00
  • Altura:
    135.00
  • Kv (rpm / v)
    149.00
  • Corrientes max (A)
    70.00
  • Potencia ( W ):
    2250.00
  • B Longitud ( mm ):
    86.00
  • Puede longitud D ( mm )
    61.00
  • Max Voltaje ( V )
    44.00
  • Un eje ( mm ):
    8.00
  • Unit Weight (g):
    840
  • C Diámetro ( mm )
    59.00
  • Longitud Total E ( mm )
    113.00
  • Resistencia ( MH ):
    21.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Listen carefully, I set up this engine on an extra 260 2,40m and 9kgs! I started with one and now a 23x8 25x10! These engines do not heat and do not consume too much and it is not power that impresses but the torque that can cause large propellers. I much prefer the G160 and Rotomax 1.40 and 1.60. I am very happy with this cheap and efficient engine.
Quality
Value
Overall
Quality
Value
Overall
Hab ich in meiner Pilatus Turbo Porter an einer 23x10 geht echt gut
Quality
Value
Overall
Quality
Value
Overall
This motor comes with a 10mm prop shaft that bolts on the front, and an 8mm to 10mm collet shaft to go on the motor shaft, it tightens on very tightly and can be hard to remove, so no set screws should be needed. This motor has loads of torque. I use it on my mountain board with a 6s 8000mah lipo, and an 11 tooth and 68tooth #25 sprocket set. On a level surface it draws less than 3-5A during low to medium acceleration, and can maintain speed at less than 1-3A. It draws 15-20A with low to medium accel up hill, and can draw over 25A doing a burnout on level ground. My board goes about 9-12mph. It is best to give it a small push with throttle to start it, so it doesn't loose timing. The brake on the YEP 120A ESC is at the lowest setting (acro) which is a little too hard to use much faster than walking speeds, so I jump off then hit the brake. The ESC has been staying cool without the fan on. It is programmed with 4pcnt starting throttle, but I might try 8pcnt. It should go 4.5 miles of mixed throttle with some small hills on one charge.
Quality
Value
Overall
Quality
Value
Overall
Super Motor fr meine Pilatus Turbo Porter an 12S

Quality
Value
Overall
Quality
Value
Overall
Put this engine on an old Top Flite Stinson Reliant, 100.5" wingspan, 22lbs flight ready with batteries, running a 20/8 prop, two 6s 5000mah batteries in series. Pulled 45 amps, produced 15lbs of thrust. Flew great!! After a 5 minute test flight battery cells still showed 3.92. Looking forward to testing it with a 24" prop, see if I can increase minutes in the air. Good replacement for 30cc gas
Quality
Value
Overall
Quality
Value
Overall
Great motor. I've put 2 of these on my mountainboard with 15:64 reduction (HTD5-15mm belts) and with 20 cm diameter wheels I get 35 Km/h of maximum speed (with an 8s LiPo) and a torque and acceleration that are just insane (can climb a hill on grass with 2 people on the skate without problems. Range is 10 Km with a 5 Ah battery.
Quality
Value
Overall
Quality
Value
Overall
This motor is basically the go-to choice for powerful yet lightweight small electric vehicle drive systems. It's basically the slowest outrunner in this size available (even the former 80xx and 120xx motors are too fast for their size), making it compatible with some of the inexpensive electric bike ESCs which perform current control and have other useful EV features. Hall sensor add-on packages are available for this size as well (search your favorite search engine for SK3 Hall Sensor or similar). Typically 1500plusW in a vehicle application on 36v with a capable controller.
Quality
Value
Overall
Quality
Value
Overall
Very powerfull, can swing a 27x10" prop and provide a static thrust of over 11kg.
Use with 70AK force controler.
Quality
Value
Overall
Quality
Value
Overall
I bought this motor for a scooter and so far it pushes me along fine except the three screws that hold the starter in place come loose easily and so do the screws that hold on the bell.
Quality
Value
Overall
Quality
Value
Overall
I bought this motor for an electric scooter and it works great on a 6 cell lipo configuration except it gets a bit warm when pushing me (120 lbs) up hills with a 13 tooth pinion sprocket and 60 tooth spur sprocket on a 12 1/2 inch wheel. The three screws that hold the starter to the end also came loose after a few hours of use, so put locktight on all of the screws before you use this motor for any length of time.
Quality
Value
Overall
View all reviews
Upload
Videos
  • Skateboard electrique (rampe, passe bas)

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.