Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Turnigy AquaStar 3520-1700KV refrigerado por agua del motor sin escobillas Outrunner

Generating Links

Turnigy AquaStar 3520-1700KV refrigerado por agua del motor sin escobillas Outrunner

Precio:

Now save ahorra 0,00 € 0,00 €

24,83 €
Estado:
Sin existencias!
SKU:
9357000003-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

El motor sin escobillas Turnigy AquaStar 3520-1700KV ofrece un rendimiento excepcional para su embarcación a un precio increíble!

Con una calidad de mecanizado CNC de aluminio del motor puede, de alta pureza bobinas de cobre de cuerda manual y poderoso imán de neodimio sinterizado, no encontrará un motor mejor precio de este calibre en ningún otro lugar! Cuenta con una camisa de refrigeración de agua de aluminio pre-instalado y tiene una circulación de aire del ventilador de refrigeración premontado para una refrigeración adicional en su barco.

Los motores sin escobillas AquaStar son una gran opción para su profundo-V, hidráulica o barco de regatas catamarán y será seguro para salir de la competencia en su estela!

caracteristicas:
• CNC del motor de aluminio mecanizado puede
• bobinas de cobre de alta pureza
• Los conectores de 3,5 mm de bala preinstalados
• Incluye conectores de 3,5 mm de bala para su ESC
• Potente imán de neodimio sinterizado
• Ingeniería de precisión para la conversión de energía máxima
• preinstalado camisa de refrigeración de agua y la refrigeración del ventilador


Especificaciones:
RPM / V: 1700KV
Max Voltaje: 14.8v (4S)
Corriente máxima: 50A
Max Watts: 750w
Resistencia: 0.021ohm
Sin corriente de carga: 1.2A
Diámetro: 35.4mm (diámetro real del motor)
Longitud: 62 mm
Tamaño del eje: 5mm
Longitud del eje: 14,5 mm
Peso: 188 g

  • Kv (rpm / v) 1700.00
  • Corrientes max (A) 50.00
  • Resistencia ( MH ) 0.00
  • Max Voltaje ( V ) 15.00
  • Potencia ( W ) 750.00
  • Un eje ( mm ) 5.00
  • B Longitud ( mm ) 62.00
  • C Diámetro ( mm ) 35.00
  • Puede longitud D ( mm ) 37.00
  • Longitud Total E ( mm ) 77.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Phil | Comprador verificado

  • Overall
  • Quality
  • Value

Excellent motor!

Jul 07, 2020

Runs the K&B 28mm water jet brilliantly on a 3 cell.
Yup, mine leaked water as well. Not much but also an easy fix by mixing a small amount of epoxy glue and filling the void where the wires enter the body. No more worries.

Scott | Comprador verificado

  • Overall
  • Quality
  • Value

Great for the price!

Jun 24, 2020

Read other reviews stating it leaks water. Haven’t noticed that on mine but in a jet boat that eventually gets water in it anyway. I just glued up the spot where the wires enter as others have mentioned and it hasn’t caused any issues

Rowen | Comprador verificado

  • Overall
  • Quality
  • Value

LEAKS

Mar 17, 2020

Bought two, both leaked.
There are copious reports on this problem and the suggested solution. Seems the water comes out through the wire aperture and not from the shaft seal. Which was also my experience.
Reported in to HK, but could see little point in sending back as probem is endemic to this motor. Out of stock anyway.
Decided to squeeze silicon sealant all around the wires to seal the aperture, fortunately had good access..
After a short amount of running, leak seems to be cured. Going to continue with model into further test runs but think problem is solved.

Phil | Comprador verificado

  • Overall
  • Quality
  • Value

Great little motor.

Sep 15, 2019

I bought 3 and they all leaked but it's really easy to fix which I did to all three motors. They leak where the wires come out of the cooling ring. There is a space around the wires where they enter. Simply mix a bit if epoxy glue and pour it into the area around the base of the wires. Don't over fill. It only takes a small amount and it doesn't seem to enter the workings of the motor. Only put glue on the cooling ring area otherwise your going to glue the two parts of the motor together. You can test by blowing through the cooling tube and blocking the other end. If it leaks you'll hear it. Cheers and happy boating.

rinse | Comprador verificado

  • Overall
  • Quality
  • Value

Turnigy AquaStar 3520-1700KV

Dec 29, 2017

good powerfull motor , after ordering i got a leaking one , hk replaced it and now its ok , good power with 4s in a jet boat

Peter | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 27, 2015

nice Motor, good looking, powerful, but - I should have read the reviews before - it's leaking like hell. Gotta find another one and ask for refund for this. Can only recommend not to buy this one :(

Michio | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 31, 2015

Mine is leaking too, most of the water exits the motor via the axle. Will try to fix, after de-installing the fan you can unscrew the axle and open the motor. A bit dissapointed but should have read the reviews before buying.

Eddy | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 26, 2015

I purchased two, sending two back, leaks around shaft, should have headed other reviews.
Very tedious sending back and then I have to reconfigure the boat.

player1212 | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Feb 13, 2015

Two of purchased engines were leaking, moreover the replacement were leaking too. Now I have four leaking motor... So I don't recommend buying this part.

dexter70 | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 28, 2014

I have bought this motor but its in the trashcan now.
The watercooling was leak and was running water right in the motor.

  1. 1
  2. 2
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!