Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Turnigy B12-30 4100kv Inrunner

Generating Links

Turnigy B12-30 4100kv Inrunner

Precio:

Now save ahorra 0,00 € 0,00 €

9,35 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
TR-B1230-4100
¿Envío gratis? ¡Haga clic aquí! aprender más!

También conocido como un motor de clase 130S. El TR-1230 es un excelente motor para pequeñas appications del FED o la transmisión directa. Piense tipo mini parque acuático o pequeña FED para aviones de GWS.

Especulación.
KV: 4100rpm / V
Potencia: 32W
Activa: 17
Resistencia: 732mh
inactividad actual: 2A
ESC requerido: 10A
configuración Lipo: 2-4Cell (7,4 a 14,8 V)

Dimensiones:
Diámetro: 12 mm
Puede Longitud: 30 mm
Longitud del eje: 10mm
Eje Ancho: 1,5 mm
Distants delanteros de montaje: 8,5 mm
Frente Rosca de montaje: M2
Peso: 18 g

  • Kv (rpm / v) 4100.00
  • Corrientes max (A) 0.00
  • Resistencia ( MH ) 732.00
  • Max Voltaje ( V ) 15.00
  • Potencia ( W ) 32.00
  • Un eje ( mm ) 1.00
  • B Longitud ( mm ) 31.00
  • C Diámetro ( mm ) 12.00
  • Puede longitud D ( mm ) 30.00
  • Longitud Total E ( mm ) 41.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Nysom | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 18, 2011

Don't know why but the shaft broke right where it was machined down. Did not have much time on this motor and did not get $8 dollars worth out of it either. Not sure if the blade was out of balance. I switched to a Blue Arrow BL1230 for now. Maybe I'll try the Turnigy B12-30 3850kv later.

Razor | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 22, 2011

Got this motor even after reading all the reviews.

hooked it up on the bench to test before installing in my Gravity/Cox spitfire. Put oil in the bearings put on GWS 3x2 prop an used 2S 500ma lipo for the first run. Started it up on bench an all seamed fine. Then the motor got loose and the prop bumped the bench. The motor shaft broke off flush with the case. Sure am glad I did not get it all installed before I found out how soft the shaft is. Verry disappointed with this motor. I cannot reccomond it. I have another Cox P47 warbird with a medusa research motor that has been crashed hard several times and never had a problem with it flys great vwery fast. Spend a little more for the better quality.

nysom | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 08, 2011

Great little motor - using this on a Eagle 50 (aka Walkera 22e) direct drive tail with a Esky Tail Blade Set 002386. The tail balde is the same as the BLADE EFLH1321, GWS 3x2 prop and also the HCB-03 from HobbyKing. I got a BLADE EFLH1321 mount and flipped it 180 so the the air flow is across the motor and with the addition of a heat sink the motor runs much cooler. I paired it with a Tz12A HobbyKing 12A BlueSeries brushless controller plugged into Assan GA-250 gyro and a walkera RX-2609 receiver that had the gyro mod (gyro board removed and gyro-sense jumper to AUX2).

dlb | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 19, 2011

I bought this for a losi 1/24 rally. It works great. good speed and power and barely gets warm with 3 cell lipo with 17t pinion and 53t spur. awesome! I would definitely recommend!!

rhoersten | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jan 22, 2011

Great brushless. Used in losi 1/24 4wd rally. Wish it came with connecters soldered. Also used turnigy 18A esc w

HELIFLA | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 13, 2010

YA HICE UNA PUBLICACION POSITIVA, PERO COMO DATO ADICIONAL, EL
A 10 QUE VA MONTADO CON FAN DE 50MM LO ESTOY VOLANDO CON
4S, RHINNO 1000MAH ,30C.
LOS ATAQUES EN PICADO QUEDAN MUY LINDOS.
SALUDOS DESDE URUGUAY................FLAVIO

pitts80pf | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 21, 2010

Not what I expected. Bearings are not good.

helifla | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 06, 2010

buen motor, esta montado en un gws a 10 con fan de 50mm. y lo lleva de maravilla.

saludos desde ururguay..........flavio

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 16, 2010

Runs little bit hot on 3S with GWS 60x25 prop, mpst like too high kv for this setup, need to order less kv motor as i like these.

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 27, 2009

great little inrunner. perfect for the gws 40mm ducted fan. I strongly recomend getting a heat sink.

  1. 1
  2. 2
  3. 3
  4. 4
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!