Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • USA
  • Global

Turnigy CA120 150kV sin escobillas Outrunner (100cc equiv)

Turnigy CA120 150kV sin escobillas Outrunner (100cc equiv)

QTY:

Now save guardar 0,00 € 0,00 €

295,75 €
Stock:
Peso:
3752 g
SKU:
12070-15-150

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descripción
del

Diseñado como un reemplazo de motor de gas de 100 cc, este motor es una gran alternativa para 3D y planos deportivos hasta 35 libras!

El motor está muy bien construida con soportes fuertes, campana de extremo y una concéntricos cojinetes dobles en la parte trasera para soportar grandes hélices giratorias pueden y, en especial durante el vuelo 3D duro.

Este motor está muy bien diseñado y de la más alta calidad.
La fábrica puede producir sólo un número limitado de estos motores por meses debido al aumento de tiempo en el equilibrio y el mecanizado de un objeto tan grande.


Especulación.
Modelo: 120-70-15
Resistencia: 0.004ohm
ESC requerido: 250A
Voltaje de entrada: 30 ~ 70V
Kv: 150 rpm / V
Peso: 2730g
Eje: 10mm
20v sin Carga de corriente: 13A @ 20V
Dimensiones: 150x120x118mm (incluyendo el Monte)
Equivalente: Gas gemelo 100cc motor (20 CV +)

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    12070-15-150
  • Brand:
    No
  • Peso ( g)
    3752.00
  • Longitud
    170.00
  • Ancho:
    155.00
  • Altura:
    160.00
  • Kv (rpm / v)
    150.00
  • Corrientes max (A)
    0.00
  • Potencia ( W ):
    0.00
  • B Longitud ( mm ):
    120.00
  • Puede longitud D ( mm )
    58.00
  • Max Voltaje ( V )
    70.00
  • Un eje ( mm ):
    10.00
  • Unit Weight (g):
    2730
  • C Diámetro ( mm )
    118.00
  • Longitud Total E ( mm )
    150.00
  • Resistencia ( MH ):
    5.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
i am running this motor with fat boy speedy on 2x 4x 3s 5000ma turnigy lipo batteries in parallel with a 28x12 pt prop flying 3D getting about 10 minutes flight with about 50pcnt battery charge left hope to learn how to download darta next and will repost the results shortly regards john snr.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this motor made by Zhuhai GS Model Accessories MFG., Ltd.
Hobbyking descriptions and product configuration table don't match the product. Hobbyking, could you fix it please to prevent confusion. I bought one already until I discover the manufacturer website. they have the bigger version, which what I want for my application. It's the CA 120-80-13 , 15000W, 130kV. Hobbyking, when are you going to list this motor ? thank you.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hello everyone, I just bought this motor and Fatboy300 ESC. can someone advice me what size propeller and what battery set up do I need to achieve the MAXIMUM output power (thrust ?). I was thinking to purchase 6 packs of 5cells nanotech 5000mAh, 45C-90C discharge rate. making 15cells 10000mAh unit. Any advice if this is good ? Thank you.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
1st: Very good Quality!
2nd: PLEASE OFFER SOME SPARE PARTS FOR THIS MOTOR HOBBYKING!!! I ordered now 3 from this motors. After 2 crashes (my fault), the engine shaft is bent and i think also the front and rear plate (the rotating ones) and also the prop-shank. It would be great, if you can sell these 4 spare parts in your shop Hobbyking!? 300 bucks for this motor is cheap, yes, but too expensive if you must buy a complete new motor after a crash.
3rd: Here are some test results: 2,6m Edge 540t from xtreme composite, flying weight 18kg, Turnigy 2200 mah 12s4p, 26x10 carbon-prop from Hobbyking, 6600 rpm, 150A, torqueroll not really possible, thrust is about also 18kg. 27x10 Carbon-prop from HK, 6300 rpm, 180A, better torque performance but I think a 28x10 Carbon-prop would be perfect for this heavy model! Best wishes from Europe, Michael
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The photos and video of my World Models 42pcnt Ultimate say it all.

Add the appropriate WWW header to the link below.

rcuniverse.com/forum/m_9933628/anchors_10551694/mpage_12/key_/anchor/tm.htm#10551694

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I see some one has sent a test report using 14s lipols. Just a little warning, 14s lipols exceeds 50volt DC . Check your local electrical supply regulations. 95 of the worlds electrical regulators require a registered electrician to work on any thing over this voltage, and to provide an electrical permit! This is because 50 volts DC has the potential to KILL. Please take this warning seriously as criminal charges can result.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mine arrived now and I must say: WOOOW, perfect quality, all magnets (28) are installed in the right position! I dont let it run at this time, so i can tell you nothing about the performance, but the motor is also BALANCED!! Cant wait to power my 2,4m EDGE with it! Ps.: I ordered 25 Turnigy 3s 2200 40C for this monster too! Best price: Only 15 $/pack!!! And they are MATCHED!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
WOW.. I just recived mine. This thing is nuts, looks really well made. Modified the heat wrap going in to the motor to be a bit more sustantial though. Have a good look for a speed controller to run this beast. there are not many around.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am testing the CA120-70 motor for use in my World Models 42 Ultimate conversion to electric power. For details, photos, and videos, check out my build thread on RC Universe.

http://www.hobbycity.com/hobbyking/store/uh_viewItem.asp?idProduct=14427
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got this motor and tested it at no-load in my lab. It got quite hot just spinning at speed. I got it up to 1050RPM and it survives just fine but is quite noisy. There is significant magnet losses (circulating currents in the magnets) which cause magnet heating and possible demagnetization. See the uploaded no-load loss characteristics that are 950W at 7000RPM and 1700W at 10,000RPM
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Otras personas han destacado este producto con estas etiquetas:

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.