New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Sistema Flybarless ciclón Turnigy

Sistema Flybarless ciclón Turnigy

Discontinued Product

Please continue searching for a similar product.
SKU:
9205000001
WANT FREE SHIPPING? Click here to find out more!

El Sistema Flybarless ciclón Turnigy es una unidad pequeña y ligera que se adapte a casi cualquier helicóptero flybarless de la minicentral eléctrica de nitro hasta un 90 tamaño. Es adecuado para dos y de hojas múltiples cabezas de rotor y es fácil de programar a través del cable USB que se suministra y el ordenador.

El Sistema Flybarless ciclón Turnigy utiliza los mejores sensores MEMS de calidad en los tres ejes, tiene una localización precisa y una excelente capacidad y las características de un viento cruzado. El rotor principal y el rotor de cola de ganancia se pueden ajustar fácilmente a través de una función de transmisor auxiliar.

El sistema de ciclón es compatible con los siguientes tipos de interfaz de receptor, receptor estándar, Futaba S-Bus, Spektrum satélite, Jeti, Fasst y muchos more.It también es compatible con analógico y de regulación digital haciendo de este un sistema muy versátil que marcar todas las cajas para casi todos los pilotos de helicóptero que quiere un sistema para su proyecto flybarless última.

caracteristicas:
• Utiliza los mejores sensores MEMS de calidad
• Función de anillo cíclico digital integrado
• la localización precisa y una excelente capacidad de viento cruzado
• Compatibile con la norma, Futaba S-Bus, satélite, receptores Spektrum Jeti y Fasst
• Ajustable rotor principal y rotor de cola de ganancia del transmisor
• Compatible con 1520us / 333HZ, 760us / 333HZ, 1520us / 167HZ, 960us / 333HZ del servo de cola digital y 1520us / 71HZ analógicas de servo
• construido en el mezclador de plato oscilante que incluye HR-3, H-3, H-4 y H-1 mezclado mecánico
• Adecuado para cabezas de rotor de 2 láminas y hojas múltiples
• Diseñado para todos los helicópteros flybarless
• programada fácilmente a través del cable USB suministrado

Especificaciones:
Tensión de funcionamiento: 4 ~ 10V
Corriente de funcionamiento: 60mA
Rango de temperatura: -10 ° C a 50 ° C
Dimensiones: 34.8x28.5x14mm
Peso: 28,5 g (cables inc)

Contenido:
la unidad 1 x Turnigy ciclón flybarless
4 x macho a macho cables de conexión (estilo JR)
1 x espuma de doble cara almohadilla de montaje
cable de programación 1 x USB

  • SKU (Número de Referencia) 9205000001
  • Brand Turnigy
  • Capacidad ( mAh ) -
  • Peso 127.0000
  • Longitud 110.00
  • Packaging Width 60.00
  • Altura 90.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Impossibile to use. Waste of money. His item has a manual translated with google. I tried to configure it, i spent 4 days reading forums, manuals and watching video on youtube. I ask HK to be refunded.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Impossibile to use. Waste of money. His item has a manual translated with google. I tried to configure it, i spent 4 days reading forums, manuals and watching video on youtube. I ask HK to be refunded.

ok after some time i HAVE GOTTEN to writing a review of this unit, not my first time trying to setup a flybarless unit, but this had to be the easiest of all.(not going to list the other units i tried.) but as far as performance I am very happy, my tail has never felt locked in as ever( not even my futaba gy401 felt this solid!) recovers well if a tail blowout happens. great fn unit HK!. my set up is a 450 se clone all hk, with dfc head, CF upper plates, alum lower plates, HK-933 dig servo int cyclic, and corona ds-319mg in the tail and no problems so far.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ok after some time i HAVE GOTTEN to writing a review of this unit, not my first time trying to setup a flybarless unit, but this had to be the easiest of all.(not going to list the other units i tried.) but as far as performance I am very happy, my tail has never felt locked in as ever( not even my futaba gy401 felt this solid!) recovers well if a tail blowout happens. great fn unit HK!. my set up is a 450 se clone all hk, with dfc head, CF upper plates, alum lower plates, HK-933 dig servo int cyclic, and corona ds-319mg in the tail and no problems so far.

Very frustrating! After waiting month to finally get the software and manual, still not able to set it up. Spend half day to figure out how to install a working driver for the USB cable, was able to connect it and run the setup wizard, but not anymore. Only thing it is doing is blinking. Waist of time and money. Very disappointed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very frustrating! After waiting month to finally get the software and manual, still not able to set it up. Spend half day to figure out how to install a working driver for the USB cable, was able to connect it and run the setup wizard, but not anymore. Only thing it is doing is blinking. Waist of time and money. Very disappointed.

OK got my nice little Cyclone within a week of its order. for those setting it up, it is really easy, just follow the setup wizard in the software that you can download here, do not connect analog servos to it while setting it up. ( i fried a good hitec hs-65 in the proccess.) now a nice solid unit so far. hold really good. also you'll need to setup a extra channel for the gain control to the cyclic. good flying all. a good buy get one

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

OK got my nice little Cyclone within a week of its order. for those setting it up, it is really easy, just follow the setup wizard in the software that you can download here, do not connect analog servos to it while setting it up. ( i fried a good hitec hs-65 in the proccess.) now a nice solid unit so far. hold really good. also you'll need to setup a extra channel for the gain control to the cyclic. good flying all. a good buy get one

ok, buying this cause of prblems with cc3d setup. worth a try anways.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ok, buying this cause of prblems with cc3d setup. worth a try anways.

i bought this eons ago with the promise of the manual or software to be posted about two weeks after it arrived here. until now they still cannot produce any instruction manual or software. it is a very expensive paper weight :( previous reviews have also been deleted

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i bought this eons ago with the promise of the manual or software to be posted about two weeks after it arrived here. until now they still cannot produce any instruction manual or software. it is a very expensive paper weight :( previous reviews have also been deleted

Customer files
Cyclone PC Software Download [4484]
Cyclone User Manual Download [6300]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!