Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

Turnigy DLG mariposa / cola en V Multi-Mixer

Turnigy DLG mariposa / cola en V Multi-Mixer

Now save guardar 0,00 € 0,00 €

8,43 €
Sin existencias!
Stock:
OUT OF STOCK
Peso:
18 g
SKU:
9419000006-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Descripción
del

Discus planeadores de lanzamiento son un montón de diversión, pero si usted tiene un transmisor básico que falta hacia fuera en una característica importante, el control de inclinación. El Turnigy DLG Multi-Mixer hace precisamente eso. Este pequeño y práctico papá doo excelente, le permite tener el control de los alerones, y utiliza la palanca de gas como de control de convergencia. Si lo hace, le permite cambiar los alerones desde neutral, reflexos, o caían en función de las condiciones de elevación. Tal vez el viento ha muerto, que desea ejecutar una gran cantidad de curvatura para obtener el mejor ascensor, a continuación, se levanta viento, criar a los alerones para limpiar la estructura del avión para una mejor penetración del viento. Además, si lo necesita para Timón / Ascensor barco, el Turnigy DLG Multi-Mixer ha incorporado un modo de cola en V para mezclar entradas de dirección y profundidad adecuada.

Para instalar cuando se utiliza el modo de ángulo de caída, sólo tiene que enchufar sus dos servos de alerones en la unidad, a continuación, enchufe la unidad en el alerón y los canales del acelerador. Después de ajustar su servoinversión usted debe estar listo para usar los alerones como flaps.

caracteristicas:
• Modos de control de convergencia y V-cola
• Configuración sencilla
• Pequeño y ligero de peso

Especificaciones:
Dimensiones: 30x11x5.5mm (no incluye cables)
Peso: 3g

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    9419000006-0
  • Brand:
    Turnigy
  • Peso ( g)
    18.00
  • Longitud
    80.00
  • Ancho:
    10.00
  • Altura:
    50.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Great little gadget if you don't have a computer radio and want to adjust flaps/camber on your model
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a nifty little gadget. It gives you a hardware solution to mixing. You can use any two servo inputs regardless of your transmitter's programming.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
(continued) . . however, if this is done without a bit of forward stick to compensate, even at that relatively small change in flap angle, the glider over shoot 20 ft above ground (pulling the tug tail upwards) but the tug is still on the ground - Oops!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am basing the last point (above) on my Slingsby 17 metre Vega sailplane, which uses large flap angles for steep landing descents (these can be even steeper descents than normal scissor airbrakes if required - great for short field outlandings) . . you slide the flap sliding bar progressively out horizontally and backwards for max descent rate . . however, during flight it stays in and you twist and rotate the same bar/lever a to operate the flaps and ailerons coupled, acting as soaring/speed flaps . . surprisingly, about 4 deg down flap is enough to get it thermalling better than a two-seat trainer (ASK 14, etc) - and 4 deg negative (up) is good for batting along at 100 mph plus between thermals . . Intrestingly, the Vega goes up on the winch wire (using zero flap) almost hands off - but starting the slower aerotow ground run it is almost impossible to have adequate aileron control (always drops a wingtip on the grass and have to abort the tow) . . however, strangely, the trick is to start moving with the full negative (up) speed flap setting (about 8 deg) and you then have aileron control . . then, at high speed (just before the take off) you twist the flap lever to zero coupled-flap/aileron (or 3 deg positive helps the climb) . . however, if this is done without a bit of forward stick to compensate, even at that relatively small change in flap angle, the glider over shoot
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
(continued) . . there is not so much drag created as down, but no risk of one wingtip stalling . . to create a a reflexed aerofoil (trailing edge up) for speed in strong winds, or posiitive aileron (down) for added soaring lift, it's surprising how little movement is required (my explanation is below) . .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Due to it's cheapness, size, and low weight, this little gizmo is well worth getting, if only for experimenting with . . because of size and weight my postal charge for two (for evaluation) was about $5.00 (to UK) . . the device is installed in-line, between the two appropriate Rx slots and the two relevant sevos (ie. channels 2 and 4 for vee-tail mode) . . (if the elevator stick gives rudder action just swap gizmo output plugs) the normally solid red light will flash if one of the servos is not plugged in properly . . therefore, obviously, the input voltage can of course only be whatever voltage you run your Rx and servos at (probably 4.8v to 6.0v) . . the two buttons are used to adjust the amount of channel mixing . . the single instruction sheet is unusually concise and very good English . . Channels 1 & 3 are used for the aerofoil camber changing mode (controlled by the ch3 throttle stick) and using the ailerons as soaring/speed flaps (but if you have only wing tip ailerons be wary about using positive aileron [down] on the landing approach - since the resulting negative wingtip washout will probably cause a wingtip to stall before the centre section (if approaching too slow) creating an incipient spin (that's probably why some models with independent airbrakes/flaps fully deployed on final approach mlx-in negative (up) aileron with the airbrakes/flaps . . there is not so
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just what I need to slow down the plane for landing using aileron as flaps. is working well with FrSky
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • Turnigy DLG Multi Mixer

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
dlgmixer.pdf download now [310.69Kb]

Combine

essential items and
acc

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.