Registrarse

Product Finder

Configuración

Useful links

 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • Global
  • USA

Controlador de velocidad Turnigy Dlux 20A SBEC sin escobillas w / Adquisición de Datos (2s ~ 4s)

Controlador de velocidad Turnigy Dlux 20A SBEC sin escobillas w / Adquisición...

QTY:

Now save guardar 0,00 € 0,00 €

14,96 €
Stock:
Peso:
40 g
SKU:
9192000026

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descripción
del

Turnigy® Dlux SBEC CES han establecido un nuevo punto de referencia en calidad y rendimiento, tanto es así que este CES ligero y altamente versátil puede manejar hasta 6s + 10A y reventar actual con total tranquilidad. Las extensas funciones de programación y registro de datos también ofrecen una versatilidad de aplicaciones rara vez se ve en un CES de esta categoría. Todos los CES Turnigy Dlux se pueden programar a través de una tarjeta de programación o por el transmisor. instrucciones claras y fáciles de entender están incluidos.

* Ahora con el registro de datos visible cuando se utiliza con caja de programación Turnigy Dlux.

Parámetros de la pantalla de registro de datos:
Temperatura máxima
Temperatura ambiental
Corriente maxima
corriente min
Voltaje máximo
Voltaje min
Voltaje nominal
Voltaje de apagado
Motor Ejecución
Hora de ENCENDIDO
Número de polos del motor
Max RPM del motor
Los tiempos de error

Especulación.
Max Cont. Corriente: 20A
Max Burst actual: 30A
Max BEC actual: 2A
BEC Voltaje: 5.5v
Lipo: 2 ~ 4S
NiMH: 5 ~ 12cells
Peso: 22grams
RPM Max (2 polos): 200.000 rpm
Tamaño: 51 x 27 x 11 mm
Motor de clavija: Conector de 3,5 mm de bala femenino
Batería Plug: Nulo

Caracteristicas.
Extremadamente baja resistencia interna
Muy baja temperatura de operación
Sobre la protección de la temperatura
APEC MOSFETs (Taiwain)

Opciones de programación.
Tipo de batería: ~ 2S 4S
Adelante atras
Suave comienzo
LV cortó el tipo (No haga caso, Reducción de poder, Parada del motor)
LV Cortar ajuste (2,5 ~ 3,5 V en incrementos de 0,1 V)
Timing (Auto, medio, alto)
Conmutación (8,16kHz)
restauración de fábrica
Control de RPM activa: (estado de gobernador) / Off

Los ajustes de fábrica por defecto.
Freno: off
Batería: Li-Po Auto Detect
Bajo Voltaje: 3.2v (apagado del motor)
Tiempo: Auto
Frecuencia: 8 KHz

Nota: caja de programación ya está disponible, compruebe los elementos relacionados a continuación.

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    9192000026
  • Brand:
    Turnigy
  • Peso ( g)
    40.00
  • Longitud
    110.00
  • Ancho:
    7.00
  • Altura:
    100.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
SimonK Firmware aufspielbar!
Quality
Value
Overall
Quality
Value
Overall
Got this to go in my Radjet 800 (stock set up). It is just a shame that this ESC comes with such short wires.
Quality
Value
Overall
Quality
Value
Overall
Here's a late update to the previous review of the ESC:
Contacted HK CS to let them know the ESC wasn't working and they needed some "proof" of the failure. So I hooked all the electrical parts up and was getting ready to shoot a short video so the problem could be seen 'in action' as-it-were. Before I started the camera rolling the ESC started showing signs of life, the motor started spinning (under control of the servo tester) and then smoke and flames shot out of one end of the ESC. Whoops...
I forwarded photos (and a short video) of the damage and after a few more emails I received a full refund credit. I'm tempted to try another one but I'd like to read some success stories first.
Quality
Value
Overall
Quality
Value
Overall
Received my ESC last Tuesday (01/22/2013) and 5 days later had an opportunity to fire it up. First I connected it to my Turnigy Programming Box and even though the display on the box lit up, I couldn't get any setting info to show. Thinking maybe my box was too old and the firmware outdated, I went directly for a quick test with a 1450Kv motor, 3S Nanotech pack and my Hitec HFP-20 servo programmer (as a signal source). No beeps or any other signs of life came fourth from the 20A, dlux ESC. There was power present from the built-in SBEC but that's all. It's dead...

And what's with the conflicting specification regarding the number of series LiPo cells it can handle? Is the number 4 or is it 6? Somebody has to get this info consistent. It's rather critical!
Quality
Value
Overall
Quality
Value
Overall
Good ESC, I only did the programming with the programming box.
Easy to set up, also the cut off temperature can be programmed in a range from 90-105.
Very fine throttle response over the complete range.
Maximum cut of setting available is 3.2V on the one I have.

I took this one because of the data logging when used with Turnigy dlux programming box. Good to have data for an easy controll of the setup. I would appreciate the amps measuring with .1 steps, not only 5A or 15A for example.
Displaying the logged data works fine on the box.

For getting rough data (min / max. values) to check that the drive setup is in the correct range its OK. For detailed data on competition models I still prefer the SM-Modellbau data logger.
Quality
Value
Overall
Quality
Value
Overall
No special comments. Just a ESC but together with its programing box, a nice and reliable combo.
Quality
Value
Overall
Quality
Value
Overall
Lger, il faut maintenant tester sa durabilit
Quality
Value
Overall
Quality
Value
Overall
very nice. .
Quality
Value
Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.