New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Turnigy interruptor eléctrico con la protección de la batería

Turnigy interruptor eléctrico con la protección de la batería

Shipped From:
  • USA
  • Global
QTY:

Now save guardar 0,00 € 0,00 €

6,81 €
Estado:
En stock
SKU:
9070000045-0
WANT FREE SHIPPING? Click here to find out more!

El interruptor eléctrico Turnigy es un interruptor de estado sólido resistente que no tiene contactos para fallar como interruptores mecánicos tradicionales. Se puede trabajar en 4 ~ 8 células NiMh / NiCd o una batería de 7.4V Lipo 2S. Cuenta con un modo de Lipo que ofrece protección de bajo voltaje de la batería si el paquete de inmersión por debajo de 6.0V. Un indicador de voltaje LED le da en un estado de vista de su receptor para que siempre sepa qué parte de su paquete de queda. La caja de plástico tiene dos lengüetas moldeadas en le permiten montar fácilmente a su fuselaje para agradables instalaciones limpias.

caracteristicas:
• momentáneo del interruptor de encendido / apagado
• lengüetas de montaje de tornillo
• Conectores de trabajar con JR / Futaba tipo tapones servo
• LED indicador de voltaje
• Modo de Lipo tiene corte de voltaje para proteger las baterías Lipoly de sobre-descarga

Especificaciones:
Voltaje de entrada: 4.8 ~ 10V (2S Lipo, o 4 ~ 8 celular NiMh / NiCd)
Corriente continua: 8A
Max Burst actual: 14A (10 seg)
Tamaño: 43x33x9mm
Peso: 9 g
Conectores: Futaba (Funciona con JR)

  • SKU (Número de Referencia) 9070000045-0
  • Brand Turnigy
  • Capacidad ( mAh ) -
  • Peso 20.0000
  • Longitud 40.00
  • Packaging Width 10.00
  • Altura 20.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

FAIL! I test ran this over the weekend and it hit cutoff (or should have) about 2-3 days prior to this review... so it should have been on cutoff for about 2-3 days. I came back Monday to check it and the brand new batteries (2s) are down to 4.5v, or 2.25v/cell. The Lipo cutoff light was still illuminated and I do believe it cut output power at the failsafe voltage. Apparently there is still enough quiescent power continuing to draw from the batteries. This simply does not do what it is advertised to do, and that is very frustrating since now I have to keep looking for a solution!... and in this case, this is work not play, so it actually matters :(

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

FAIL! I test ran this over the weekend and it hit cutoff (or should have) about 2-3 days prior to this review... so it should have been on cutoff for about 2-3 days. I came back Monday to check it and the brand new batteries (2s) are down to 4.5v, or 2.25v/cell. The Lipo cutoff light was still illuminated and I do believe it cut output power at the failsafe voltage. Apparently there is still enough quiescent power continuing to draw from the batteries. This simply does not do what it is advertised to do, and that is very frustrating since now I have to keep looking for a solution!... and in this case, this is work not play, so it actually matters :(

funciona perfectamente

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

funciona perfectamente

I TRY TO USE IN MI AVISTAR, BUT IT DOES NOT LIGTH THE LED INDICATING CHARGE, USING 4.8 NIMH BATTERIES, DOES NOT LIKE ME

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I TRY TO USE IN MI AVISTAR, BUT IT DOES NOT LIGTH THE LED INDICATING CHARGE, USING 4.8 NIMH BATTERIES, DOES NOT LIKE ME

Its not good for Nixx 4.8V battery. The LED lowest value of 5 LEDs is 5.5v. The instruction says that the lowest input voltage is 5.0V and the specs above says 4.8V. My advise is, use only lipo! It does work with lipo but useless with nixx battery. My almost fully charge 4.8V battery shows no lightning LEDs because voltage is under 5.5V. What happends when the safety circuit cuts off the current.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Its not good for Nixx 4.8V battery. The LED lowest value of 5 LEDs is 5.5v. The instruction says that the lowest input voltage is 5.0V and the specs above says 4.8V. My advise is, use only lipo! It does work with lipo but useless with nixx battery. My almost fully charge 4.8V battery shows no lightning LEDs because voltage is under 5.5V. What happends when the safety circuit cuts off the current.

ok kullanisli bir rn tavsiye ederim

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ok kullanisli bir rn tavsiye ederim

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save