New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Turnigy L2210A-1650 de motor sin escobillas (180w)

Turnigy L2210A-1650 de motor sin escobillas (180w)

Shipped From:
  • USA
  • Global
QTY:

Now save guardar 0,00 € 0,00 €

10,33 €
Estado:
En stock
SKU:
L2210A-1650
WANT FREE SHIPPING? Click here to find out more!
Turnigy L2210A-1650 de motor sin escobillas (180w)

Presupuesto:
Dimensiones: 28 mm x 25 mm
Peso: 49g (64g con todos los accesorios, conectores y controlador prop)
KV: 1650rpm / V
Voltaje: 7.2V ~ 11.1V (2s ~ 3s)
Potencia máxima: 180w
Corriente máxima: 17.5
Corriente sin carga: 1.3A
Diámetro del eje: 3 mm
Empuje: 520g
ESC: 20A
  • SKU (Número de Referencia) L2210A-1650
  • Brand Turnigy
  • Peso 92.0000
  • Longitud 95.00
  • Packaging Width 45.00
  • Altura 55.00
  • Kv (rpm / v) 1650.00
  • Corrientes max (A) 17.50
  • Resistencia ( MH ) 0.00
  • Max Voltaje ( V ) 11.00
  • Potencia ( W ) 180.00
  • Un eje ( mm ) 3.00
  • B Longitud ( mm ) 25.00
  • C Diámetro ( mm ) 28.00
  • Puede longitud D ( mm ) 12.00
  • Longitud Total E ( mm ) 44.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

A very good motor for the money. I have 2 of them.
One of them was used with a 8x6 prop, on my flitetest versa wing. The motor got a little hot, because the prop is to big, but it still works just like a brand new motor. Thats after 30 flights of 10 min, and i have gone full throttle in the flights quite a few times. Very impressed with the perfomance. I got about 280 watt from that setup.
You should use a 7x4 prop to keep it under 180 watts, but i think they can handle a little more.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A very good motor for the money. I have 2 of them.
One of them was used with a 8x6 prop, on my flitetest versa wing. The motor got a little hot, because the prop is to big, but it still works just like a brand new motor. Thats after 30 flights of 10 min, and i have gone full throttle in the flights quite a few times. Very impressed with the perfomance. I got about 280 watt from that setup.
You should use a 7x4 prop to keep it under 180 watts, but i think they can handle a little more.

This is a good motor for small models. I got 600g thrust out of it with a 7x4 prop on a 3S battery. At full throttle it was pulling under 17 Amps but it did use 200 Watts of power, but that was with a fully charged battery. After the battery gets to nominal voltage (11.1V) it should be pulling under 180W, so with this setup you need to be careful on a fully charged battery.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a good motor for small models. I got 600g thrust out of it with a 7x4 prop on a 3S battery. At full throttle it was pulling under 17 Amps but it did use 200 Watts of power, but that was with a fully charged battery. After the battery gets to nominal voltage (11.1V) it should be pulling under 180W, so with this setup you need to be careful on a fully charged battery.

Great little motor. Flys on a yak 450 grams with a 30 amp esc and 9.5 gws propeller cut down to 8" . I tapered the trailing edge 1/4" also to reduce amps a little and it works great.
8.4 propeller works as well but not as fast . straight up at half the rate.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little motor. Flys on a yak 450 grams with a 30 amp esc and 9.5 gws propeller cut down to 8" . I tapered the trailing edge 1/4" also to reduce amps a little and it works great.
8.4 propeller works as well but not as fast . straight up at half the rate.

Very good motor! I use it on a Teksumo with 7x6 prop. The prop isn't perfect but this setup runs smooth and the motor works well temperatured when I don't fly full throttle all the time. The bearings seem to be durable and there are very low vibrations. 5/5 stars!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good motor! I use it on a Teksumo with 7x6 prop. The prop isn't perfect but this setup runs smooth and the motor works well temperatured when I don't fly full throttle all the time. The bearings seem to be durable and there are very low vibrations. 5/5 stars!

Great engine. Good value and very powerful. My plane (a scratch-build) seems to be able to accelerate vertically with this engine, a 20a ESC, 1000mah 3s, and 7x5e prop. Plane weighs 430g with engine on. Actually a very quiet engine as well. See my video review here: http://youtu.be/QjJ6cyHJ0sg

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great engine. Good value and very powerful. My plane (a scratch-build) seems to be able to accelerate vertically with this engine, a 20a ESC, 1000mah 3s, and 7x5e prop. Plane weighs 430g with engine on. Actually a very quiet engine as well. See my video review here: http://youtu.be/QjJ6cyHJ0sg

Very good motor. It has a lot of power and a very low price.
The only problem is that the bearings are not very good. After a few flights they made a strange crackling noise.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good motor. It has a lot of power and a very low price.
The only problem is that the bearings are not very good. After a few flights they made a strange crackling noise.

Paired with a 25 or 30A ESC this motor gives a good parkfly punch with a 7x4. Used one eg. in a Swift II (similar to the Bonsai) on 3S (1300mAh) with good power!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Paired with a 25 or 30A ESC this motor gives a good parkfly punch with a 7x4. Used one eg. in a Swift II (similar to the Bonsai) on 3S (1300mAh) with good power!

Seems like a good motor. Use a 7x4 inch or smaller prop, any bigger and you will probably draw too many amps. I tried a 9x6, 8x6, 8x3.8 and all pulled too high of amps - Around 30. Won't work for the project I got it for (63" Predator Drone), but, I will be using it on another plane.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Seems like a good motor. Use a 7x4 inch or smaller prop, any bigger and you will probably draw too many amps. I tried a 9x6, 8x6, 8x3.8 and all pulled too high of amps - Around 30. Won't work for the project I got it for (63" Predator Drone), but, I will be using it on another plane.

I am still waiting for shipment from EU warehouse.
Order is now over 4 days due. Last order I made with Hobbyking.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am still waiting for shipment from EU warehouse.
Order is now over 4 days due. Last order I made with Hobbyking.

RUNNING THIS IN KY TEK SUMO WORKS WELL

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

RUNNING THIS IN KY TEK SUMO WORKS WELL

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Customer files
EXTRA 330 WITH BRUSHLESS L2210-A Download [1267]
Harbor Freight J-3 Repowered with L2210 Download [2]
Harbor Freight J-3 Firewall Download [1]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags