Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Turnigy marina 180A BEC regulador de la velocidad a prueba de agua con refrigeración por agua

Generating Links

Turnigy marina 180A BEC regulador de la velocidad a prueba de agua con refrigeración por agua

Precio:

Now save ahorra 0,00 € 0,00 €

104,14 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9020000034-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

Los controladores de velocidad impermeable Turnigy Marine se embalan con la última tecnología y son allí entre algunos de los mejores en el mercado hoy en día. Estos controladores de velocidad han alcanzado el nivel máximo de protección IP67 (Ingress Protection), esta es la norma de que los dispositivos electrónicos se prueban a. El 6 en la clasificación IP significa que está "totalmente protegido contra el polvo", el 7 en la clasificación IP significa que está "protegido contra la inmersión entre 15 cm y 1 m.

Los controladores de velocidad Turnigy Marine se suministran con un sistema de "Tecnología de calor barra de cobre" refrigeración por agua (patentado en exclusiva) y muy baja resistencia interna del MOSFET. Cada uno tiene un software que cuenta con una excelente puesta en marcha y funcionamiento de la aceleración especialmente diseñado, que tienen un importe pendiente de "golpe" a la salida de vueltas cuando se utiliza en los barcos de alta velocidad. Una prueba de agua interruptor de encendido / apagado está equipado para que pueda conectar la batería y luego sellar la escotilla, la radio puede entonces estar encendido cuando está listo para funcionar.

2 modos de funcionamiento se pueden seleccionar, ya sea hacia delante o hacia adelante solamente y marcha atrás. Los controladores de velocidad también tienen varias protecciones como se muestra en la lista de características a continuación. La programación de las diversas funciones del controlador de velocidad se hace fácilmente usando su transmisor.

caracteristicas:
• El sistema de refrigeración por agua patentado
• Excelente puesta en marcha y funcionamiento de la aceleración
• Bolsas de "golpe" al salir acelerando de vueltas
• Equipado con impermeable de encendido / apagado
• 2 modos de funcionamiento se pueden seleccionar (o reenvía sólo hacia delante y marcha atrás)
• Programable a través del transmisor
• Modo de programa: modo de funcionamiento, el recuento de células LiPoly, de bajo voltaje de corte, el momento
• Protección contra sobrecalentamiento
• Bajo voltaje de corte de protección
• Protección contra la pérdida de señal

Especificaciones:
Voltaje de entrada: 2 ~ 6 elementos Lipoly (6 ~ 18 NiMh)
Corriente continua: 180A
Burst actual: 1080A
Tipo BEC: Switching con interruptor on / off
BEC de salida: 6V @ 5A
Conectores de motor: 6mm
Servo plomo: estilo JR
Servo Longitud del cable: 300 mm
Tubo de agua de enfriamiento: 3 mm I / D ~ 5,4 mm O / D
Dimensiones: 72x48x36.6mm
Peso: 245 g

Tenga en cuenta: Este controlador de velocidad no se suministra con un conector de batería.

  • Miss Geico 29,ESC180A Turnigy, moteur Dynamite2000kv,Lipo2x3s 5,5A, INDRE ET LOIRE VALLEY
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

CENDRO | Comprador verificado

  • Overall
  • Quality
  • Value

Valeur sure

Apr 18, 2018

Fort, fiable ras ...

O. W. | Comprador verificado

  • Overall
  • Quality
  • Value

Good, but only 2 caps on the wires?

Nov 28, 2017

First impression is good. But... The esc has only 2 caps on the powerleads? On the pictures it looks like there are more on it. I have not installed it in my boat yet so can't give a proper review so far. Anyone else tried the version with the 2 big caps on the leads yet?

Zooma | Comprador verificado

  • Overall
  • Quality
  • Value

Looks Good.

Sep 13, 2017

My first impression when opening the box was that this is a very impressive looking bit of kit that comes with plenty of good reviews.
I bought this speedo for use in my Pursuit so it should be more than adequate and leave some "in reserve" that may be handy if I decide to upgrade the motor and/or cell count in the future.
The plugs that came on the motor that is fitted in the Pursuit were too small to fit those that are fitted to this speed controller but fortunately the speedo came with a spare set of 3 matching plugs (complete with colour coded heat shrink).
I removed the plugs from the motor and soldered-on the bigger ones - but then found that they did not fit into the speed controllers sockets!!!!
After about an hour of very careful sanding with fine emery cloth (and constant check fitting) I eventually had the plugs fitting smoothly (but tight) into the speed controllers sockets.
I now have everything fitted into my Pursuit and when connected up the speed controller worked immediately and the motor was turning in the correct direction - so all good so far.
The auto set-up was a surprise but I wanted to program the unit to make sure I had full throttle and to remove the reverse function.
So far the speed controller has refuse to accept any programming commands from the RadioLink transmitter so I will keep trying and maybe buy a programming card as I do want to get the best out of this speed controller and to make full use of its built-in functions.

peter | Comprador verificado

  • Overall
  • Quality
  • Value

8 out of 10

Jun 14, 2017

Seems to be working well but shuts down over 120 amps with green light flashing, doesnt feel too hot. Maybe the 180 amp rating is a bit optimistic?

Johan | Comprador verificado

  • Overall
  • Quality
  • Value

180

May 28, 2017

It is impossible to program this ecu with the transmitter, I can't enter the programming mode. When I run the boat it will only run for a couple of seconds before it shuts down and you have to go back to neutral position to start the engine again.

Rogier | Comprador verificado

  • Overall
  • Quality
  • Value

Marine 180A v3

May 10, 2017

I bought this ESC for my 820mm boat, it is very easy to install in the boat. (use super velcron) But to program it by using your transmitter a whole different ball game. I would def. recommend a programbox whit this ESC. Then you know for 100% sure your settings. I run it whit a 2200KV and it is like superfast. For the price their isn't any better for >800mm boats.

Rogier | Comprador verificado

  • Overall
  • Quality
  • Value

Marine 180A v3

May 10, 2017

I bought this ESC for my 820mm boat, it is very easy to install in the boat. (use super velcron) But to program it by using your transmitter a whole different ball game. I would def. recommend a programbox whit this ESC. Then you know for 100% sure your settings. I run it whit a 2200KV and it is like superfast. For the price their isn't any better for >800mm boats.

Daniel | Comprador verificado

  • Overall
  • Quality
  • Value

excellent product

Dec 12, 2016

easy to configure without a programming card
100% waterproof
a must have upgrade for any fast boat
get one.......

boboday | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 21, 2016

one of the best ESC for marine RC boats

Robin | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jan 10, 2016

This is the best ESC for boats over 800 mm. I have bought 5 because they are 100pcnt waterproof, tough, plenty of capacitors for long leads and have terrific punch. Don't hesitate - buy it.

  1. 1
  2. 2
Archivos de clientes
TGY Marine Manual Download [3044]
Firmware Download [472]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios