New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Turnigy marina 80A-HV Brushless ESC Barco

Turnigy marina 80A-HV Brushless ESC Barco

Discontinued Product

Please continue searching for a similar product.
SKU:
TR-M-80-HV
WANT FREE SHIPPING? Click here to find out more!
TURNIGY marina de ESC se construyen con tiempos de ejecución durante largos de EE.UU. IR MOSFET y menos calor.
Barco de esc tiene un requisito diferente para ventilar o ESC del coche. Su necesidad de empate sostenida de alto amperaje hace de avión de ESC ESC inadecuados y coches con gran capacidad de amperios pico, innecesaria.
Es por eso que TURNIGY de esc marinos están diseñados exclusivamente para embarcaciones, y recubiertos de laca resistente al agua antiestática continuación, para evitar un cortocircuito en caso de que el esc mojarse. Pueden manejar altas cargas sostenida amperios / voltios y manejar mejor el calor que un coche o avión esc.
Lo que hace este CES mejor que otros?
-bien Diseñados MCU, con un código eficiente para la sincronización hace más rápido y el momento preciso.
-Rápido Ciclo de reloj MCU combinado con un código eficiente significa 100,000rpm ciclo de la CPU *
-Eficiente FET de reducir el calor y las entregas de conmutación sostenida en alto amplificador / tensión.
PCB -bien diseñados (6 capas) y el diagrama del circuito se encarga de alto amperaje y sin desgaste.
comptability motor -Gran. en marcha suave y curva de motor lineal.
-active agua enfriada disipador de calor que realmente funciona.


Funciones programables;
Marcha atrás
Baja Tensión (ninguno / 2.8v / 3v / 3.2v / 3.4v)
Freno: (ninguno / blando / duro)
Timing (0.00 / 3.75 / 7.50 / 11.25 / 15.00 / 18.75 / 22.50 / 26.25)

Corriente constante: 80A
Burst actual: 180A
Resistencia:. 0007ohm
Batería: 5-12S Lipoly
BEC: Nulo
Tipo de motor: sin escobillas sin sensores
Tamaño: 94 x 33 x 18 mm
Peso: 81g

  • SKU (Número de Referencia) TR-M-80-HV
  • Brand -
  • Capacidad ( mAh ) -
  • Peso 139.0000
  • Longitud 180.00
  • Ancho 20.00
  • Altura 140.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Excellent Esc.. runs smoothly and does not miss a beat.
However it has NO BRAKE.. not medium or hard or soft.. so if you need this at all please skip this item

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent Esc.. runs smoothly and does not miss a beat.
However it has NO BRAKE.. not medium or hard or soft.. so if you need this at all please skip this item

i orderd 2 of these esc and nether one will program, goes through its

cycle but nothing happens. am i doing something wrong do these program differnt then any other esc. need help dont know to send them back or am i missing something anyone please help

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i orderd 2 of these esc and nether one will program, goes through its

cycle but nothing happens. am i doing something wrong do these program differnt then any other esc. need help dont know to send them back or am i missing something anyone please help

I tried the controller following the instructions but I could not get it working, I connected to a battery 6-cell LiPo (22.2 volts), by removing the red plug big but when I connect the battery starts to smoke and the cable becomes hot (it was also connected to RX via the cable around but does not respond to the transmitter, the Rx was powered separately). I need your support.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I tried the controller following the instructions but I could not get it working, I connected to a battery 6-cell LiPo (22.2 volts), by removing the red plug big but when I connect the battery starts to smoke and the cable becomes hot (it was also connected to RX via the cable around but does not respond to the transmitter, the Rx was powered separately). I need your support.

Can any one tell me the best motor for this HV-Esc. I have a Apparition-II Offshore Brushless RC Twin Hull w/ Twin motor (800mm).
And when i use the stock motors with the Hv-Esc the motors get over heated. Can any one help me??????

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Can any one tell me the best motor for this HV-Esc. I have a Apparition-II Offshore Brushless RC Twin Hull w/ Twin motor (800mm).
And when i use the stock motors with the Hv-Esc the motors get over heated. Can any one help me??????

hello,

I am using 2 HV-80 on my catamaran, 12S Flightmax, Medusa 36060-850, 2x X442 props, everything stays cool and speed is above 65 mph...
Only problem is the charging capacitor small black wire with its resistor, it burns under 12 s!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

hello,

I am using 2 HV-80 on my catamaran, 12S Flightmax, Medusa 36060-850, 2x X442 props, everything stays cool and speed is above 65 mph...
Only problem is the charging capacitor small black wire with its resistor, it burns under 12 s!

Well, this ESC survived the 32V volt setup a lot better then the old 100A HV ESC (the non-marine) In fact, I once measured a peak of 104A on a datalogger, ESC didn't bend or break.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well, this ESC survived the 32V volt setup a lot better then the old 100A HV ESC (the non-marine) In fact, I once measured a peak of 104A on a datalogger, ESC didn't bend or break.

I just read all the reviews. no one said anything about the 2 servo leads coming from the speed control. The instructions say nothing about the two servo leads(to the receiver).
Why are there two (2) servo/receiver connectors on this speed control?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just read all the reviews. no one said anything about the 2 servo leads coming from the speed control. The instructions say nothing about the two servo leads(to the receiver).
Why are there two (2) servo/receiver connectors on this speed control?

Be careful programing throttle range....

I fried one of mine by accidentally by letting off the throttle half way through programing the throttle range, then pulling full throttle again... I guess i had programed it and then i gave it full throttle and i guess the esc actually went to full throttle and the esc shot a 6-8 inch jet of sparks and flames, out of it.....

But, other wise they seem fine...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Be careful programing throttle range....

I fried one of mine by accidentally by letting off the throttle half way through programing the throttle range, then pulling full throttle again... I guess i had programed it and then i gave it full throttle and i guess the esc actually went to full throttle and the esc shot a 6-8 inch jet of sparks and flames, out of it.....

But, other wise they seem fine...

I have bought one of these esc, never get warm and the most cheapest, affordable hv esc in the world at an unbeatable price!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have bought one of these esc, never get warm and the most cheapest, affordable hv esc in the world at an unbeatable price!!!

I have 2 of this in my Isiklar,running on 6S2P3000mA/h on 2 Scorpion 4025-1350KV with 3.5 Degrees Timing on X457 Octuras between 99.6 and 102km/h.Watercoolers must be modyfied a little...Motor 45-48 degrees,ESC only 40 degrees.

The price is OK,Programming with transmitter or BOX makes no Problem.Low Voltage shut down is perfect and function all over perfect.

Greeting Peter

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have 2 of this in my Isiklar,running on 6S2P3000mA/h on 2 Scorpion 4025-1350KV with 3.5 Degrees Timing on X457 Octuras between 99.6 and 102km/h.Watercoolers must be modyfied a little...Motor 45-48 degrees,ESC only 40 degrees.

The price is OK,Programming with transmitter or BOX makes no Problem.Low Voltage shut down is perfect and function all over perfect.

Greeting Peter

  1. 1
  2. 2
  3. 3
Customer files
Manual in English Download [377]
Manual en Español Download [260]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!