Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

TURNIGY MEGA 380W de litio Cargador de batería Polímero

Generating Links

TURNIGY MEGA 380W de litio Cargador de batería Polímero

Precio:

Now save ahorra 0,00 € 0,00 €

75,28 €
Enviado desde:
  • USA
  • Global
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
T380W
¿Envío gratis? ¡Haga clic aquí! aprender más!

¿Estás listo para las tasas de carga y 380W 20A para su alto nivel de carga C capaces paquetes Turnigy / Zippy? Sabemos que la respuesta es "SI", por lo que le ofrecemos la Mega 380W cargador del balance de alta potencia Turnigy!

El Mega 380W Turnigy es un alto poder equilibrar el cargador / descargador que puede manejar hasta 6 células de LiPo / LiFe y NiMH / NiCd hasta 18S con precisión. Incluido con el Mega 380W Turnigy es un conjunto de cables y enchufes de carga, adecuado para la mayoría de aplicaciones.


Caracteristicas;
controlado por microprocesador
la sensibilidad del Delta-pico (NiMH / NiCd)
Individual de equilibrio de carga y descarga de la célula
Li-ion, LiPo y vida capaces
Ni-Cd y NiMH capaces
De alta potencia y un circuito de alto rendimiento
Función de almacenamiento, permite que la corriente almacenamiento seguro
El almacenamiento de datos (Almacena hasta 10 paquetes en la memoria)
carga cíclica / descarga

Nota: El sensor de temperatura no incluido.

Especulación.
Voltaje de entrada: 11.0 - 18.0Volt
Corriente de carga: 0,1 - 20.0A
La corriente de descarga: 0,1 - 5,0 A
La capacidad de carga máxima: 380W voltaje de entrada @> 15V
Capacidad de descarga máxima: 25W
Dren actual para balancear Li-po: 200mAh / celular
Litio recuento (Li-Po / LiIo / LiFe) pilas: 1 - 6 series
NiCd / NiMH recuento de células de la batería: 1 - 18 series
Voltaje de la batería Pb: 2 -24V
Memorias de configuración de la batería: 10
El control inteligente de la temperatura:
Peso: 762G
Dimensiones: 152X145X57mm

Incluso;
1 x cargador Turnigy Mega 380W
1 x enchufe de plátano w / XT60
1 x enchufe de plátano w / Clips Aligator
1 x XT60 plomo w / Mujer Mini JST, Mujer Futaba y Glow Plug encendedor
1 x Clips Par Aligator
1 x adaptador de JST XH

Este cargador tiene un enchufe de equilibrio JST-XH, lo que lo hace compatible con Zippy, TURNIGY y cualquier paquete con un saldo de plomo JST-XH.

Nota: Fuente de alimentación y el sensor de temperatura no incluidos.

  • Turnigy 380w Mega Charger
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

dantheflyingman | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 15, 2013

So ive had this charger for about a week now and ive decided to post this review, my conclution on this charger is



-The build quality is amazing, encased in a full metal shell this feels sturdy and solid

-No power leaks, dont get shocked ever time u tought the charger like accucel 6 and 7

-Lives up to the 380w output and can charge 4s for me at 20A

-Simple to use, the buttons feel good to the touch and the firmware is easy to use and navigate around

-Comes with ample amount of charging leads and accessories, including a cool balance board



So overall a great charger for an even greater price and i would have to rccomend this charger to anyone out there!!

Great stuff hobbyking

Imprez | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 08, 2013

How can I start... I receieved this charger last week. It uses same program than imax B6 and all of those small chinese chargers, it's very easy and intuitive to use.

The real power of this charger is 240Watt at 12v... to get its 380 watt you must use 18v input and i don not know much supplies with 18v outpout.

Balancer its not much accurate, in a storage charge of a zippy 5Ah 20c 2s it remains one cell at 3.8v and the other at 3.79v, so its integrated balancer seems not much accurate. You'd better use one external for expensive batteries.

I charged Lead acid batteries at 0'1c and 0'05C, dont forguet deactivate the timer limitator and capacity limitator for huge batteries, those are preconfigurated to 120min and 5000mAh. This charger works fine with Pb.

Am very sorry but I still didn't charged any nimh so i can not review that.

Charger comes with some connectors as shown in the image.

The biggest deffect I can find is that the fan is very noisy and if it starts, always work at full power, so you cant sleep while charging batteries at high power (actually is not recommended lol).

I can find that the piece to connect 2. 3. 4. 5 or 6s to balancer is completly useless: you can connect the battery balancer plug directly to the charger while the negative pin must be always first, check it with the tester before do this.

However i have any battery that can't be charged up t

Roger-DK | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 01, 2013

Just says connection break. I tried three different cables and batteries without luck. It will cost me more to send this back than what I would get refunded! Waste of my hard earned money... :(

peter2482 | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 16, 2012

Works as it should. Using a pc power supply. Only negative is, the fans are very noisy. Other than that it seems to be a great charger

Cheetor | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 11, 2012

Been a very good charger for me. does a great job at charging my electric bike batteries. pumps out the power!. But boy is she loud, I guess those loud fans are needed with the kind of power it delivers, just make sure you get a nice big power supply for it. I'd definitly buy it again very good value for money.

Don | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 12, 2012

The charger arrived today , 12 days to new zealand, great and well packed.
There have been two issues already the supply lead is way too short, I had to add a meter of (two core cable ) to make it usable.
The white balance plug, to multie balance adaptor wouldnt fit in the hole , I bent it trying to get it in,so pulled the unit apart to fix it. I ended up shaving some plastic off the plug, The heat sink inside has been cut with a massive band saw and never cleaned up, what a mess.
Apart from that the charger works well .I have a little 50 watt turnigy and it wasnt able to charge a 6s above 86pcnt with 2.5 amps, the 380 w takes it to 98pcnt with 20 watts easily.
All up its an ok unit and I would advise others to buy it.

Ooben | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 10, 2012

Got this charger because I have everything from ni-cads to LiIo computer pulls to charge. It seems to be a great charger...but it is kind of hard to tell without any instructions. I have used it with niXX batteries and it does a very good job at detecting delta-peaks, but until I can decipher the lithium settings I'm not going to be using it on my litho batteries. Does HobbyKing have any instructions for this charger?

jeff125 | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 08, 2012

Rock solid thus far.

Only reached 51C while charging a 6S pack at 12amps. Fans are loud but do a good job cooling the unit.

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 25, 2012

Great battery charger for the value. Cooling fans are a little noisy when loading batteries with high amperage. The display is bright and easy to read.

The buttons and procedures for the programming are the same of the other charger. Well made and sturdy housing.

Amply satisfied.

SCTarguard387 | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 01, 2011

Had mine for about 2 1/2 months working fine until today. Powered it up and would not go past the start up screen, nothing. None of the buttons worked. Powered off several times nope then I lightly tapped it on my work bench and bam there it goes working again.

  1. 1
  2. 2
Archivos de clientes
manual Download [1644]
MANUAL Download [1]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!