Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

TURNIGY MEGA 400W V2 de polímero de litio cargador de batería (versión 2)

TURNIGY MEGA 400W V2 de polímero de litio cargador de batería (versión 2)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
1030 g
SKU:
T400W-V2
Descripción
del

Tome ventaja de la nueva tasa de carga alta C en el nuevo Zippy, Turnigy, y los paquetes de baterías Tunrigy Nano-Tech con el nuevo cargador Turnigy Mega V2 400W.

Esta es una versión nueva y mejorada del cargador original Mega 400W.

El Turnigy Mega 400W V2 es un alto poder equilibrar el cargador / descargador que puede manejar hasta tasas de carga 20A en 6S LiPo / LiFe y 18S NICD / NIMH precisión. Incluido con el Turnigy Mega V2 400W es un conjunto de cables y enchufes de carga, adecuado para la mayoría de aplicaciones.


Caracteristicas;
controlado por microprocesador
la sensibilidad del Delta-pico (NiMH / NiCd)
Individual de equilibrio de carga y descarga de la célula
Li-ion, LiPo y vida capaces
Ni-Cd y NiMH capaces
De alta potencia y un circuito de alto rendimiento
Función de almacenamiento, permite que la corriente almacenamiento seguro
El almacenamiento de datos (Almacena hasta 10 paquetes en la memoria)
carga cíclica / descarga

Nota: El sensor de temperatura no incluido.

Especulación.
Voltaje de entrada: 11.0 - 18.0Volt
Corriente de carga: 0,1 - 20.0A
La corriente de descarga: 0,1 - 5,0 A
La capacidad de carga máxima: 400W voltaje de entrada @> 15V
Capacidad de descarga máxima: 25W
Dren actual para balancear Li-po: 200mAh / celular
Litio recuento (Li-Po / LiIo / LiFe) pilas: 1 - 6 series
NiCd / NiMH recuento de células de la batería: 1 - 18 series
Voltaje de la batería Pb: 2 -24V
Memorias de configuración de la batería: 10
El control inteligente de la temperatura:
Peso: 815g
Dimensiones: 146x144x56mm

Incluso;
cargador V2 1 x 400W Mega Turnigy
1 x adaptador de JST XH
enchufe de plátano 1 x w / XT60 masculina
enchufe de plátano 1 x w / Ventas al descubierto
1 x XT60 w / clip de cocodrilo
1 x XT60 w / hembra JST
1 x XT60 w / mujer Futaba
1 x clip de cocodrilo para conductores de entrada del cargador

Este cargador tiene un enchufe de carga JST-XH, lo que lo hace compatible con Zippy, HXT, TURNIGY y cualquier paquete con un adaptador JST.

Nota: Fuente de alimentación y el sensor de temperatura no incluidos.

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    T400W-V2
  • Brand:
    No
  • Peso ( g)
    1030.00
  • Longitud
    190.00
  • Ancho:
    70.00
  • Altura:
    188.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
When it worked it worked noisy but fine. It burned after just 1.5 years of use. That never happened to me with a charger. I have had at least 8 chargers of different brands. Normally i could sell them because of increased powerdemand. This one ended in the garbage bin a couple of years to soon.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very Bad Charger, I charge only 20 batteries and now Itsn´t balance, never stop the charger, always "dancing qickly" bettwen 4.16 ans 4.22
I have the charger since 1 year...and 1 month and I could´t use the warranty,never again
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Otherwise nice charger, but internal temperature sensor shows 17deg celsius, and the fans are running in full throttle, very loud charger.
I use server power supply with 14v@47 amps and its much quieter than this.
Calibration is off, so compared to original Imax B6 (with cheali charger mod), and the voltages are 0.2 volts off compared to it. Verified with multimeter.
So quality is not good, interface is a copy of Imax B6.
It has banana plugs for charger connection and cables/balance board are good. Have to test it later with Cheali charger mod to be able to calibrate it.
(Stock version can not be calibrated).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this one on sale, but that's not the only reason. I LOVE the Turnigy chargers. Easy to use and work just great! I've had my original acucell-6 for about 7 years now and its still going. This one is more than adequate for my charging needs of 4 and 5s 5000mah packs. Actually, it's capable of more than twice the amount of power I need.. 'Nuf said...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is the second one i have bought and i am very happy with it. The only bad is that these are very loud - fans are louder than my heli :D, but cherging is good and acurate enough and most important i can charge fast my 5000mah 6 s batts. Bye
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super Charger! So good, easy to use and reliable I bought another!
Although the new one had a malfunctioning key/button, I followed the Returns/RMA procedure, made a little video on my phone, and Hobby King are sending out another no arguments! Brilliant service!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
consigliato dai miei amici ,sono contento di averlo comprato ottimo
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great charger. Charges my 10000 mah 4cell in 30 min. @ 1C (10a for this battery) YOU NEED A GOOD POWER SUPPLY one that can deliver the amps like HobbyKing 540w 100~120v Power Supply (13.8v~18v - 30amp) I'm not using that one but one similar from efuel power regardless you need power to drive this charger running mine at 15.3v 10a
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Goeie lader met veel vermogen
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice product.. Wait for it to go on sale though.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Turnigy Mega 400w V2 Charger

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.