La cámara Micro Turnigy FPV utiliza los mismos componentes de calidad y la óptica como las otras cámaras que conducen FPV marca. Ahora disponible en la resolución 700TVL súper fuerte estas cámaras ofrecen una de las experiencias más vívidas FPV volar disponibles en la actualidad.
Opcionales 2,1 mm, 2,5 mm y 2,8 mm Lentes y Cable de programación OSD se venden por separado, ver artículos relacionados a continuación.
Tipo de cámara: Color NTSC
Pick Up dispositivo: 1/3 "Sony CCDII EXviewHAD *
Pic Elementos: 976 (H) x 494 (V)
Resolución: 700TV líneas
Iluminación mínima: 0.1 Lux / F1.2
Bal blanco: Auto / preset / / exterior / interior fluorecent (requiere cable opcional OSD)
Peso: 35 g
Voltaje: 15V ~ DC5v
Potencia: 150 mA
Cable de programación OSD próximamente.
"EXviewHAD CCDII" es una marca comercial de Sony Corporation. El EXviewHAD CCDII es una versión de alto rendimiento del CCD de Sony HAD sensor (Agujero-Acumulación Diode) con una sensibilidad mejorada considerablemente mediante la incorporación de una nueva tecnología de semiconductores desarrollada por Sony Corporation.
SKU (Número de Referencia):
Peso ( g)
- SKU (Número de Referencia):
My first fpv camera, used it on rc cars.
It's is a very very durable camera. Aluminum case has multiple road rash scraps and bumps. An intimidating amount of adjustability is possible via the OSD cable available separately.
Couldn't get the 2.1mm Turnigy Micro Lense to work on this camera, very blurry cannot adjust the focus enough.
Has a microphone however it is an internal one. That means you pretty much on hear wind noise and vibrations (such as the hum/whine from the motor). Static noise from video / signal break up is FAR louder than the microphone sensitivity. In other words be careful not to adjust for the low DB from the mic by turning up the volume. When video signal breaks up the audio static will be VERY LOUD.
All that said, camera is a great buy because of:
5 - 15 volt capability (i use it on 5v)
Metal Case, very durable
Lots of adjustable settings
Low light capabilities
TIP: Use a tiny amount of strong rubber type glue to secure the plug on the camera. This is a comparatively weak point on the camera unless this is done.The camera on spec appears to be very good, and based on other reviews I decided to purchase one. It arrived fine, but once connected, the picture is practically a white out, with an image which resembles as old photo negative. I also got the programming cable and have been able to reset to factory, but no difference, adjust the white balance etc. The only way to get any form of picture which you couldnt FPV with is to turn the brightness to Zero!!, yes Zero...which is odd, as on most products the picture would be black!. HK's famous Customer Service is stalling me. It will be sent back and who knows I might get a replacement I might not...I wouldnt normally be bothered but this is a high end product for HK. A customer of 5 years with literally hundreds of orders and I am treated like this. So much for loyalty. It was the likes of me, spreading word of mouth which built this business.Does anybody know how am i supposed to plug the cam cable to the ts352 500mwvTX ? And , i have to tell that there's no black wire as shown on the picture when you cut the rcs plugs to customize and plug to the vtx. I got only Red, white, yellow and the copper naked wire . Which one is audio, video, negative, ground and power ?? ON my ts352 vtx i got green (audio), white(audio), yellow (video), red (vcc )and black (ground)Thanks folksBE WARNED!!
This camera is larger than just about every other camera HK sells. It does NOT fit in the camera mounts that HK sells, and make sure you get an extra output cable (but not the one sold with it) as the one that comes with it the plug is too large to fit onto any other camera mount. This camera is also very heavy, it has a metal casing around the entire circut boad including the back and is well over the stated 35gms.
The quality of the image is awsome, if you can deal wit the fact that you will have issues ttrying to mount it on anything other than the fixed position stand it comes with its a great FPV camera.My remote was not sent with te order so I can't tell you if playing with the settings will make any difference to the video but out of the box its spot on, just change the lense to a 2.1 to get a wider view.